From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v8 21/27] target-arm: make DFSR banked
Date: Thu, 30 Oct 2014 16:28:52 -0500 [thread overview]
Message-ID: <1414704538-17103-22-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1414704538-17103-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DFSR has a secure and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
v3 -> v4
- Reverted esr/dfsr back to array-based notation as a union with v7 naming.
---
target-arm/cpu.h | 10 +++++++++-
target-arm/helper.c | 7 ++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index c44649e..29bf273 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -260,7 +260,15 @@ typedef struct CPUARMState {
uint32_t ifsr32_el2;
};
};
- uint64_t esr_el[4];
+ union {
+ struct {
+ uint64_t _unused_dfsr;
+ uint64_t dfsr_ns;
+ uint64_t hsr;
+ uint64_t dfsr_s;
+ };
+ uint64_t esr_el[4];
+ };
uint32_t c6_region[8]; /* MPU base/size registers. */
uint64_t far_el[4]; /* Fault address registers. */
uint64_t par_el1; /* Translation result. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index de355f5..c5948f7 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1650,7 +1650,8 @@ static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
static const ARMCPRegInfo vmsa_cp_reginfo[] = {
{ .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]),
+ .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s),
+ offsetoflow32(CPUARMState, cp15.dfsr_ns) },
.resetfn = arm_cp_reset_ignore, },
{ .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
.access = PL1_RW, .resetvalue = 0,
@@ -4309,11 +4310,11 @@ void arm_cpu_do_interrupt(CPUState *cs)
offset = 4;
break;
case EXCP_DATA_ABORT:
- env->cp15.esr_el[1] = env->exception.fsr;
+ A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr);
env->cp15.far_el[1] = deposit64(env->cp15.far_el[1], 0, 32,
env->exception.vaddress);
qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n",
- (uint32_t)env->cp15.esr_el[1],
+ env->exception.fsr,
(uint32_t)env->exception.vaddress);
new_mode = ARM_CPU_MODE_ABT;
addr = 0x10;
--
1.8.3.2
next prev parent reply other threads:[~2014-10-31 15:27 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 21:28 [Qemu-devel] [PATCH v8 00/27] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 01/27] target-arm: extend async excp masking Greg Bellows
2014-10-31 19:00 ` Peter Maydell
2014-11-05 21:12 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 02/27] target-arm: add async excp target_el function Greg Bellows
2014-10-31 11:56 ` Peter Maydell
2014-10-31 14:14 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 03/27] target-arm: add banked register accessors Greg Bellows
2014-10-31 16:50 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 04/27] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 05/27] target-arm: add CPREG secure state support Greg Bellows
2014-10-31 12:15 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 06/27] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-31 12:28 ` Peter Maydell
2014-10-31 12:31 ` Peter Maydell
2014-10-31 16:20 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 07/27] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-10-31 12:44 ` Peter Maydell
2014-10-31 19:01 ` Greg Bellows
2014-11-04 22:20 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 08/27] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-31 12:06 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 09/27] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-31 12:01 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 10/27] target-arm: add NSACR register Greg Bellows
2014-10-31 13:24 ` Peter Maydell
2014-10-31 21:09 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 11/27] target-arm: add SDER definition Greg Bellows
2014-10-31 13:30 ` Peter Maydell
2014-10-31 21:17 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 12/27] target-arm: add MVBAR support Greg Bellows
2014-10-31 13:35 ` Peter Maydell
2014-10-31 21:19 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 13/27] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-31 14:07 ` Peter Maydell
2014-10-31 21:51 ` Greg Bellows
2014-10-31 23:26 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 14/27] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-31 14:18 ` Peter Maydell
2014-11-03 14:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 15/27] target-arm: make CSSELR banked Greg Bellows
2014-10-31 14:23 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 16/27] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Greg Bellows
2014-10-31 15:04 ` Peter Maydell
2014-11-04 22:44 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 17/27] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-10-31 15:07 ` Peter Maydell
2014-11-04 22:45 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 18/27] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-31 15:26 ` Peter Maydell
2014-11-04 22:46 ` Greg Bellows
2014-11-04 23:27 ` Peter Maydell
2014-11-05 15:09 ` Greg Bellows
2014-11-05 15:15 ` Peter Maydell
2014-11-05 15:18 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 19/27] target-arm: make DACR banked Greg Bellows
2014-10-31 15:38 ` Peter Maydell
2014-11-03 21:23 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 20/27] target-arm: make IFSR banked Greg Bellows
2014-10-31 16:18 ` Peter Maydell
2014-11-05 22:19 ` Greg Bellows
2014-10-30 21:28 ` Greg Bellows [this message]
2014-10-31 16:19 ` [Qemu-devel] [PATCH v8 21/27] target-arm: make DFSR banked Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 22/27] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-31 16:24 ` Peter Maydell
2014-11-03 22:59 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 23/27] target-arm: make PAR banked Greg Bellows
2014-10-31 17:21 ` Peter Maydell
2014-11-03 22:58 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 24/27] target-arm: make VBAR banked Greg Bellows
2014-10-31 17:22 ` Peter Maydell
2014-11-03 22:06 ` Greg Bellows
2014-11-03 22:49 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 25/27] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-31 17:27 ` Peter Maydell
2014-11-03 22:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 26/27] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-31 17:31 ` Peter Maydell
2014-11-03 23:00 ` Greg Bellows
2014-11-04 14:13 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 27/27] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414704538-17103-22-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).