From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v8 07/27] target-arm: insert AArch32 cpregs twice into hashtable
Date: Thu, 30 Oct 2014 16:28:38 -0500 [thread overview]
Message-ID: <1414704538-17103-8-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1414704538-17103-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Prepare for cp register banking by inserting every cp register twice,
once for secure world and once for non-secure world.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
v7 -> v8
- Updated define registers asserts to allow either a non-zero fieldoffset or
non-zero bank_fieldoffsets.
- Updated CP register hashing to always set the register fieldoffset when
banked register offsets are specified.
v5 -> v6
- Fixed NS-bit number in the CPREG hash lookup from 27 to 29.
- Switched to dedicated CPREG secure flags.
- Fixed disablement of reset and migration of common 32/64-bit registers.
- Globally replace Aarch# with AArch#
v4 -> v5
- Added use of ARM CP secure/non-secure bank flags during register processing
in define_one_arm_cp_reg_with_opaque(). We now only register the specified
bank if only one flag is specified, otherwise we register both a secure and
non-secure instance.
---
target-arm/helper.c | 98 ++++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 82 insertions(+), 16 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 959a46e..c1c6303 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3296,22 +3296,62 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
uint32_t *key = g_new(uint32_t, 1);
ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
- if (r->state == ARM_CP_STATE_BOTH && state == ARM_CP_STATE_AA32) {
- /* The AArch32 view of a shared register sees the lower 32 bits
- * of a 64 bit backing field. It is not migratable as the AArch64
- * view handles that. AArch64 also handles reset.
- * We assume it is a cp15 register if the .cp field is left unset.
+
+ if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) {
+ /* Register is banked (using both entries in array).
+ * Overwriting fieldoffset as the array is only used to define
+ * banked registers but later only fieldoffset is used.
*/
- if (r2->cp == 0) {
- r2->cp = 15;
+ r2->fieldoffset = r->bank_fieldoffsets[nsbit];
+ }
+
+ if (state == ARM_CP_STATE_AA32) {
+ /* Clear the secure state flags and set based on incoming nsbit */
+ r2->secure &= ~(ARM_CP_SECSTATE_S | ARM_CP_SECSTATE_NS);
+ r2->secure |= ARM_CP_SECSTATE_S << nsbit;
+
+ if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) {
+ /* If the register is banked and V8 is enabled then we don't need
+ * to migrate or reset the AArch32 version of the banked
+ * registers as this will be handled through the AArch64 view.
+ * If v7 then we don't need to migrate or reset the AArch32
+ * non-secure bank as this will be handled through the AArch64
+ * view. In this case the secure bank is not mirrored, so we must
+ * preserve it's reset criteria and allow it to be migrated.
+ *
+ * The exception to the above is cpregs with a crn of 13
+ * (specifically FCSEIDR and CONTEXTIDR) in which case there may
+ * not be an AArch64 equivalent for one or either bank so migration
+ * and reset must be preserved.
+ */
+ if (r->state == ARM_CP_STATE_BOTH) {
+ if ((arm_feature(&cpu->env, ARM_FEATURE_V8) && r->crn != 13) ||
+ nsbit) {
+ r2->type |= ARM_CP_NO_MIGRATE;
+ r2->resetfn = arm_cp_reset_ignore;
+ }
+ }
+ } else if (!nsbit) {
+ /* The register is not banked so we only want to allow migration of
+ * the non-secure instance.
+ */
+ r2->type |= ARM_CP_NO_MIGRATE;
+ r2->resetfn = arm_cp_reset_ignore;
}
- r2->type |= ARM_CP_NO_MIGRATE;
- r2->resetfn = arm_cp_reset_ignore;
+
+ if (r->state == ARM_CP_STATE_BOTH) {
+ /* We assume it is a cp15 register if the .cp field is left unset.
+ */
+ if (r2->cp == 0) {
+ r2->cp = 15;
+ }
+
#ifdef HOST_WORDS_BIGENDIAN
- if (r2->fieldoffset) {
- r2->fieldoffset += sizeof(uint32_t);
- }
+ if (r2->fieldoffset) {
+ r2->fieldoffset += sizeof(uint32_t);
+ }
#endif
+ }
}
if (state == ARM_CP_STATE_AA64) {
/* To allow abbreviation of ARMCPRegInfo
@@ -3460,10 +3500,14 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
*/
if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) {
if (r->access & PL3_R) {
- assert(r->fieldoffset || r->readfn);
+ assert((r->fieldoffset ||
+ (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) ||
+ r->readfn);
}
if (r->access & PL3_W) {
- assert(r->fieldoffset || r->writefn);
+ assert((r->fieldoffset ||
+ (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) ||
+ r->writefn);
}
}
/* Bad type field probably means missing sentinel at end of reg list */
@@ -3476,8 +3520,30 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
if (r->state != state && r->state != ARM_CP_STATE_BOTH) {
continue;
}
- add_cpreg_to_hashtable(cpu, r, opaque, state,
- crm, opc1, opc2, SCR_NS);
+ if (state == ARM_CP_STATE_AA32) {
+ /* Under AArch32 CP registers can be common
+ * (same for secure and non-secure world) or banked.
+ */
+ uint32_t s =
+ r->secure & (ARM_CP_SECSTATE_S | ARM_CP_SECSTATE_NS);
+ if (ARM_CP_SECSTATE_S == s) {
+ add_cpreg_to_hashtable(cpu, r, opaque, state,
+ crm, opc1, opc2, !SCR_NS);
+ } else if (ARM_CP_SECSTATE_NS == s) {
+ add_cpreg_to_hashtable(cpu, r, opaque, state,
+ crm, opc1, opc2, SCR_NS);
+ } else {
+ add_cpreg_to_hashtable(cpu, r, opaque, state,
+ crm, opc1, opc2, !SCR_NS);
+ add_cpreg_to_hashtable(cpu, r, opaque, state,
+ crm, opc1, opc2, SCR_NS);
+ }
+ } else {
+ /* AArch64 registers get mapped to non-secure instance
+ * of AArch32 */
+ add_cpreg_to_hashtable(cpu, r, opaque, state,
+ crm, opc1, opc2, SCR_NS);
+ }
}
}
}
--
1.8.3.2
next prev parent reply other threads:[~2014-10-31 15:28 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 21:28 [Qemu-devel] [PATCH v8 00/27] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 01/27] target-arm: extend async excp masking Greg Bellows
2014-10-31 19:00 ` Peter Maydell
2014-11-05 21:12 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 02/27] target-arm: add async excp target_el function Greg Bellows
2014-10-31 11:56 ` Peter Maydell
2014-10-31 14:14 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 03/27] target-arm: add banked register accessors Greg Bellows
2014-10-31 16:50 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 04/27] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 05/27] target-arm: add CPREG secure state support Greg Bellows
2014-10-31 12:15 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 06/27] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-31 12:28 ` Peter Maydell
2014-10-31 12:31 ` Peter Maydell
2014-10-31 16:20 ` Greg Bellows
2014-10-30 21:28 ` Greg Bellows [this message]
2014-10-31 12:44 ` [Qemu-devel] [PATCH v8 07/27] target-arm: insert AArch32 cpregs twice into hashtable Peter Maydell
2014-10-31 19:01 ` Greg Bellows
2014-11-04 22:20 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 08/27] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-31 12:06 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 09/27] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-31 12:01 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 10/27] target-arm: add NSACR register Greg Bellows
2014-10-31 13:24 ` Peter Maydell
2014-10-31 21:09 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 11/27] target-arm: add SDER definition Greg Bellows
2014-10-31 13:30 ` Peter Maydell
2014-10-31 21:17 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 12/27] target-arm: add MVBAR support Greg Bellows
2014-10-31 13:35 ` Peter Maydell
2014-10-31 21:19 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 13/27] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-31 14:07 ` Peter Maydell
2014-10-31 21:51 ` Greg Bellows
2014-10-31 23:26 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 14/27] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-31 14:18 ` Peter Maydell
2014-11-03 14:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 15/27] target-arm: make CSSELR banked Greg Bellows
2014-10-31 14:23 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 16/27] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Greg Bellows
2014-10-31 15:04 ` Peter Maydell
2014-11-04 22:44 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 17/27] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-10-31 15:07 ` Peter Maydell
2014-11-04 22:45 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 18/27] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-31 15:26 ` Peter Maydell
2014-11-04 22:46 ` Greg Bellows
2014-11-04 23:27 ` Peter Maydell
2014-11-05 15:09 ` Greg Bellows
2014-11-05 15:15 ` Peter Maydell
2014-11-05 15:18 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 19/27] target-arm: make DACR banked Greg Bellows
2014-10-31 15:38 ` Peter Maydell
2014-11-03 21:23 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 20/27] target-arm: make IFSR banked Greg Bellows
2014-10-31 16:18 ` Peter Maydell
2014-11-05 22:19 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 21/27] target-arm: make DFSR banked Greg Bellows
2014-10-31 16:19 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 22/27] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-31 16:24 ` Peter Maydell
2014-11-03 22:59 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 23/27] target-arm: make PAR banked Greg Bellows
2014-10-31 17:21 ` Peter Maydell
2014-11-03 22:58 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 24/27] target-arm: make VBAR banked Greg Bellows
2014-10-31 17:22 ` Peter Maydell
2014-11-03 22:06 ` Greg Bellows
2014-11-03 22:49 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 25/27] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-31 17:27 ` Peter Maydell
2014-11-03 22:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 26/27] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-31 17:31 ` Peter Maydell
2014-11-03 23:00 ` Greg Bellows
2014-11-04 14:13 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 27/27] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414704538-17103-8-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).