qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
	serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch,
	christoffer.dall@linaro.org
Cc: daniel.thompson@linaro.org, Greg Bellows <greg.bellows@linaro.org>
Subject: [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping
Date: Thu, 30 Oct 2014 17:11:56 -0500	[thread overview]
Message-ID: <1414707132-24588-1-git-send-email-greg.bellows@linaro.org> (raw)

This patch series adds ARM GICv1 and GICv2 security extension support.  As a
result GIC interrupt grouping and FIQ enablement have also been added.  FIQ
enablement is limited to ARM the ARM vexpress and virt machines.

At the current moment, the security extension capability is not enabled as it
depends on ARM secure address space support for proper operation.  Instead,
secure checks are hardwired as non-secure.

v1 -> v2
- Fixed GIC_SET macro logic for group 0 and 1
- Fixed gic_update to use correct GIC_CTLR bit for group 1
- Reworked gic_set/get_cpu_control to better handle non-security extension case
  for GICv1.
- Fixed various BPR read/write issues.
- Fixed EOIR ackctl issue.
- Fixed issue with gic_acknowledge not properly checking secure state.
- Fixed gic_update use of incorrect bit to check cpu_control group 1
  enablement.
- Added clarifying comments
- Various fixes based on initial version review comments (see individual
  patches for details).


Fabian Aggeler (15):
  hw/intc/arm_gic: Request FIQ sources
  hw/arm/vexpress.c: Wire FIQ between CPU <> GIC
  hw/intc/arm_gic: Add Security Extensions property
  hw/intc/arm_gic: Add ns_access() function
  hw/intc/arm_gic: Add Interrupt Group Registers
  hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked
  hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked
  hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked
  hw/intc/arm_gic: Implement Non-secure view of RPR
  hw/intc/arm_gic: Handle grouping for GICC_HPPIR
  hw/intc/arm_gic: Change behavior of EOIR writes
  hw/intc/arm_gic: Change behavior of IAR writes
  hw/intc/arm_gic: Restrict priority view
  hw/intc/arm_gic: Break out gic_update() function
  hw/intc/arm_gic: add gic_update() for grouping

Greg Bellows (1):
  hw/arm/virt.c: Wire FIQ between CPU <> GIC

 hw/arm/vexpress.c                |   2 +
 hw/arm/virt.c                    |   2 +
 hw/intc/arm_gic.c                | 497 ++++++++++++++++++++++++++++++++++++---
 hw/intc/arm_gic_common.c         |   9 +-
 hw/intc/arm_gic_kvm.c            |   8 +-
 hw/intc/armv7m_nvic.c            |   2 +-
 hw/intc/gic_internal.h           |  25 ++
 include/hw/intc/arm_gic_common.h |  23 +-
 8 files changed, 526 insertions(+), 42 deletions(-)

--
1.8.3.2

             reply	other threads:[~2014-10-31 15:26 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-30 22:11 Greg Bellows [this message]
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 01/16] hw/intc/arm_gic: Request FIQ sources Greg Bellows
2015-04-14 18:46   ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 02/16] hw/arm/vexpress.c: Wire FIQ between CPU <> GIC Greg Bellows
2015-04-14 18:48   ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 03/16] hw/arm/virt.c: " Greg Bellows
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 04/16] hw/intc/arm_gic: Add Security Extensions property Greg Bellows
2015-04-14 18:51   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 05/16] hw/intc/arm_gic: Add ns_access() function Greg Bellows
2015-04-14 18:53   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 06/16] hw/intc/arm_gic: Add Interrupt Group Registers Greg Bellows
2015-04-14 19:13   ` Peter Maydell
2015-04-17 17:33     ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 07/16] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Greg Bellows
2014-11-04 14:46   ` Daniel Thompson
2014-11-04 18:35     ` Greg Bellows
2015-04-14 19:18   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 08/16] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Greg Bellows
2015-04-14 19:22   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 09/16] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Greg Bellows
2015-04-14 19:23   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 10/16] hw/intc/arm_gic: Implement Non-secure view of RPR Greg Bellows
2015-04-14 19:24   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 11/16] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Greg Bellows
2015-04-14 19:25   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 12/16] hw/intc/arm_gic: Change behavior of EOIR writes Greg Bellows
2015-04-14 19:30   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 13/16] hw/intc/arm_gic: Change behavior of IAR writes Greg Bellows
2015-04-14 19:31   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 14/16] hw/intc/arm_gic: Restrict priority view Greg Bellows
2015-04-14 19:32   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 15/16] hw/intc/arm_gic: Break out gic_update() function Greg Bellows
2015-04-14 19:36   ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 16/16] hw/intc/arm_gic: add gic_update() for grouping Greg Bellows
2014-11-07 12:44   ` Daniel Thompson
2014-11-10 14:43     ` Greg Bellows
2014-11-10 16:13       ` Christoffer Dall
2015-04-14 19:39   ` Peter Maydell
2015-04-14 19:18 ` [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414707132-24588-1-git-send-email-greg.bellows@linaro.org \
    --to=greg.bellows@linaro.org \
    --cc=aggelerf@ethz.ch \
    --cc=christoffer.dall@linaro.org \
    --cc=daniel.thompson@linaro.org \
    --cc=edgar.iglesias@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).