From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch,
christoffer.dall@linaro.org
Cc: daniel.thompson@linaro.org
Subject: [Qemu-devel] [PATCH v2 14/16] hw/intc/arm_gic: Restrict priority view
Date: Thu, 30 Oct 2014 17:12:10 -0500 [thread overview]
Message-ID: <1414707132-24588-15-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1414707132-24588-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
GICs with Security Extensions restrict the non-secure view of the
interrupt priority and priority mask registers.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
---
hw/intc/arm_gic.c | 66 +++++++++++++++++++++++++++++++++++++++++++++-----
hw/intc/gic_internal.h | 3 +++
2 files changed, 63 insertions(+), 6 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 7eb72df..e01cfdc 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -258,11 +258,66 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu)
void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val)
{
+ uint8_t prio = val;
+
+ if (s->security_extn && ns_access()) {
+ if (GIC_TEST_GROUP0(irq, (1 << cpu))) {
+ return; /* Ignore Non-secure access of Group0 IRQ */
+ }
+ prio = 0x80 | (prio >> 1); /* Non-secure view */
+ }
+
if (irq < GIC_INTERNAL) {
- s->priority1[irq][cpu] = val;
+ s->priority1[irq][cpu] = prio;
} else {
- s->priority2[(irq) - GIC_INTERNAL] = val;
+ s->priority2[(irq) - GIC_INTERNAL] = prio;
+ }
+}
+
+uint32_t gic_get_priority(GICState *s, int cpu, int irq)
+{
+ uint32_t prio = GIC_GET_PRIORITY(irq, cpu);
+
+ if (s->security_extn && ns_access()) {
+ if (GIC_TEST_GROUP0(irq, (1 << cpu))) {
+ return 0; /* Non-secure access cannot read priority of Group0 IRQ */
+ }
+ prio = (prio << 1); /* Non-secure view */
}
+ return prio;
+}
+
+void gic_set_priority_mask(GICState *s, int cpu, uint8_t val)
+{
+ uint8_t pmask = (val & 0xff);
+
+ if (s->security_extn && ns_access()) {
+ if (s->priority_mask[cpu] & 0x80) {
+ /* Priority Mask in upper half */
+ pmask = 0x80 | (pmask >> 1);
+ } else {
+ /* Non-secure write ignored if priority mask is in lower half */
+ return;
+ }
+ }
+ s->priority_mask[cpu] = pmask;
+}
+
+uint32_t gic_get_priority_mask(GICState *s, int cpu)
+{
+ uint32_t pmask = s->priority_mask[cpu];
+
+ if (s->security_extn && ns_access()) {
+ if (pmask & 0x80) {
+ /* Priority Mask in upper half, return Non-secure view */
+ pmask = (pmask << 1);
+ } else {
+ /* Priority Mask in lower half, RAZ */
+ pmask = 0;
+ }
+ }
+ return pmask;
+
}
uint32_t gic_get_cpu_control(GICState *s, int cpu)
@@ -556,7 +611,7 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
irq = (offset - 0x400) + GIC_BASE_IRQ;
if (irq >= s->num_irq)
goto bad_reg;
- res = GIC_GET_PRIORITY(irq, cpu);
+ res = gic_get_priority(s, cpu, irq);
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
if (s->num_cpu == 1 && s->revision != REV_11MPCORE) {
@@ -920,7 +975,7 @@ static uint32_t gic_cpu_read(GICState *s, int cpu, int offset)
case 0x00: /* Control */
return gic_get_cpu_control(s, cpu);
case 0x04: /* Priority mask */
- return s->priority_mask[cpu];
+ return gic_get_priority_mask(s, cpu);
case 0x08: /* Binary Point */
if (s->security_extn && ns_access()) {
/* BPR is banked. Non-secure copy stored in ABPR. */
@@ -958,8 +1013,7 @@ static void gic_cpu_write(GICState *s, int cpu, int offset, uint32_t value)
case 0x00: /* Control */
return gic_set_cpu_control(s, cpu, value);
case 0x04: /* Priority mask */
- s->priority_mask[cpu] = (value & 0xff);
- break;
+ return gic_set_priority_mask(s, cpu, value);
case 0x08: /* Binary Point */
if (s->security_extn && ns_access()) {
/* BPR is banked. Non-secure copy stored in ABPR. */
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index fbb1f66..13fe5a6 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -76,6 +76,9 @@ void gic_complete_irq(GICState *s, int cpu, int irq);
void gic_update(GICState *s);
void gic_init_irqs_and_distributor(GICState *s);
void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val);
+uint32_t gic_get_priority(GICState *s, int cpu, int irq);
+void gic_set_priority_mask(GICState *s, int cpu, uint8_t val);
+uint32_t gic_get_priority_mask(GICState *s, int cpu);
uint32_t gic_get_cpu_control(GICState *s, int cpu);
void gic_set_cpu_control(GICState *s, int cpu, uint32_t value);
uint8_t gic_get_running_priority(GICState *s, int cpu);
--
1.8.3.2
next prev parent reply other threads:[~2014-10-31 15:26 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 22:11 [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping Greg Bellows
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 01/16] hw/intc/arm_gic: Request FIQ sources Greg Bellows
2015-04-14 18:46 ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 02/16] hw/arm/vexpress.c: Wire FIQ between CPU <> GIC Greg Bellows
2015-04-14 18:48 ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 03/16] hw/arm/virt.c: " Greg Bellows
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 04/16] hw/intc/arm_gic: Add Security Extensions property Greg Bellows
2015-04-14 18:51 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 05/16] hw/intc/arm_gic: Add ns_access() function Greg Bellows
2015-04-14 18:53 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 06/16] hw/intc/arm_gic: Add Interrupt Group Registers Greg Bellows
2015-04-14 19:13 ` Peter Maydell
2015-04-17 17:33 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 07/16] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Greg Bellows
2014-11-04 14:46 ` Daniel Thompson
2014-11-04 18:35 ` Greg Bellows
2015-04-14 19:18 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 08/16] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Greg Bellows
2015-04-14 19:22 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 09/16] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Greg Bellows
2015-04-14 19:23 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 10/16] hw/intc/arm_gic: Implement Non-secure view of RPR Greg Bellows
2015-04-14 19:24 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 11/16] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Greg Bellows
2015-04-14 19:25 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 12/16] hw/intc/arm_gic: Change behavior of EOIR writes Greg Bellows
2015-04-14 19:30 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 13/16] hw/intc/arm_gic: Change behavior of IAR writes Greg Bellows
2015-04-14 19:31 ` Peter Maydell
2014-10-30 22:12 ` Greg Bellows [this message]
2015-04-14 19:32 ` [Qemu-devel] [PATCH v2 14/16] hw/intc/arm_gic: Restrict priority view Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 15/16] hw/intc/arm_gic: Break out gic_update() function Greg Bellows
2015-04-14 19:36 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 16/16] hw/intc/arm_gic: add gic_update() for grouping Greg Bellows
2014-11-07 12:44 ` Daniel Thompson
2014-11-10 14:43 ` Greg Bellows
2014-11-10 16:13 ` Christoffer Dall
2015-04-14 19:39 ` Peter Maydell
2015-04-14 19:18 ` [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414707132-24588-15-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=daniel.thompson@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).