From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch,
christoffer.dall@linaro.org
Cc: daniel.thompson@linaro.org
Subject: [Qemu-devel] [PATCH v2 06/16] hw/intc/arm_gic: Add Interrupt Group Registers
Date: Thu, 30 Oct 2014 17:12:02 -0500 [thread overview]
Message-ID: <1414707132-24588-7-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1414707132-24588-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Interrupt Group Registers (previously called Interrupt Security
Registers) as defined in GICv1 with Security Extensions or GICv2 allow
to configure interrupts as Secure (Group0) or Non-secure (Group1).
In GICv2 these registers are implemented independent of the existence of
Security Extensions.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
---
v1 -> v2
- Add clarifying comments to gic_dist_readb/writeb on interrupt group register
update
- Swap GIC_SET_GROUP0/1 macro logic. Setting the irq_state.group field for
group 0 should clear the bit not set it. Similarly, setting the field for
group 1 should set the bit not clear it.
---
hw/intc/arm_gic.c | 49 +++++++++++++++++++++++++++++++++++++---
hw/intc/arm_gic_common.c | 1 +
hw/intc/gic_internal.h | 4 ++++
include/hw/intc/arm_gic_common.h | 1 +
4 files changed, 52 insertions(+), 3 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index bee71a1..36ac188 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -312,8 +312,27 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
if (offset < 0x08)
return 0;
if (offset >= 0x80) {
- /* Interrupt Security , RAZ/WI */
- return 0;
+ /* Interrupt Group Registers
+ *
+ * For GIC with Security Extn and Non-secure access RAZ/WI
+ * For GICv1 without Security Extn RAZ/WI
+ */
+ res = 0;
+ if (!(s->security_extn && ns_access()) &&
+ ((s->revision == 1 && s->security_extn)
+ || s->revision == 2)) {
+ /* Every byte offset holds 8 group status bits */
+ irq = (offset - 0x080) * 8 + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ for (i = 0; i < 8; i++) {
+ if (!GIC_TEST_GROUP0(irq + i, cm)) {
+ res |= (1 << i);
+ }
+ }
+ }
+ return res;
}
goto bad_reg;
} else if (offset < 0x200) {
@@ -457,7 +476,31 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
} else if (offset < 4) {
/* ignored. */
} else if (offset >= 0x80) {
- /* Interrupt Security Registers, RAZ/WI */
+ /* Interrupt Group Registers
+ *
+ * For GIC with Security Extn and Non-secure access RAZ/WI
+ * For GICv1 without Security Extn RAZ/WI
+ */
+ if (!(s->security_extn && ns_access()) &&
+ ((s->revision == 1 && s->security_extn)
+ || s->revision == 2)) {
+ /* Every byte offset holds 8 group status bits */
+ irq = (offset - 0x080) * 8 + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ for (i = 0; i < 8; i++) {
+ /* Group bits are banked for private interrupts (internal)*/
+ int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
+ if (value & (1 << i)) {
+ /* Group1 (Non-secure) */
+ GIC_SET_GROUP1(irq + i, cm);
+ } else {
+ /* Group0 (Secure) */
+ GIC_SET_GROUP0(irq + i, cm);
+ }
+ }
+ }
} else {
goto bad_reg;
}
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index e35049d..28f3b2a 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -52,6 +52,7 @@ static const VMStateDescription vmstate_gic_irq_state = {
VMSTATE_UINT8(level, gic_irq_state),
VMSTATE_BOOL(model, gic_irq_state),
VMSTATE_BOOL(edge_trigger, gic_irq_state),
+ VMSTATE_UINT8(group, gic_irq_state),
VMSTATE_END_OF_LIST()
}
};
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index e87ef36..f01955a 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -50,6 +50,10 @@
s->priority1[irq][cpu] : \
s->priority2[(irq) - GIC_INTERNAL])
#define GIC_TARGET(irq) s->irq_target[irq]
+#define GIC_SET_GROUP0(irq, cm) (s->irq_state[irq].group &= ~(cm))
+#define GIC_SET_GROUP1(irq, cm) (s->irq_state[irq].group |= (cm))
+#define GIC_TEST_GROUP0(irq, cm) ((s->irq_state[irq].group & (cm)) == 0)
+
/* The special cases for the revision property: */
#define REV_11MPCORE 0
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index 7825134..b78981e 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -42,6 +42,7 @@ typedef struct gic_irq_state {
uint8_t level;
bool model; /* 0 = N:N, 1 = 1:N */
bool edge_trigger; /* true: edge-triggered, false: level-triggered */
+ uint8_t group;
} gic_irq_state;
typedef struct GICState {
--
1.8.3.2
next prev parent reply other threads:[~2014-10-31 15:27 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 22:11 [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping Greg Bellows
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 01/16] hw/intc/arm_gic: Request FIQ sources Greg Bellows
2015-04-14 18:46 ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 02/16] hw/arm/vexpress.c: Wire FIQ between CPU <> GIC Greg Bellows
2015-04-14 18:48 ` Peter Maydell
2014-10-30 22:11 ` [Qemu-devel] [PATCH v2 03/16] hw/arm/virt.c: " Greg Bellows
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 04/16] hw/intc/arm_gic: Add Security Extensions property Greg Bellows
2015-04-14 18:51 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 05/16] hw/intc/arm_gic: Add ns_access() function Greg Bellows
2015-04-14 18:53 ` Peter Maydell
2014-10-30 22:12 ` Greg Bellows [this message]
2015-04-14 19:13 ` [Qemu-devel] [PATCH v2 06/16] hw/intc/arm_gic: Add Interrupt Group Registers Peter Maydell
2015-04-17 17:33 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 07/16] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Greg Bellows
2014-11-04 14:46 ` Daniel Thompson
2014-11-04 18:35 ` Greg Bellows
2015-04-14 19:18 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 08/16] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Greg Bellows
2015-04-14 19:22 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 09/16] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Greg Bellows
2015-04-14 19:23 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 10/16] hw/intc/arm_gic: Implement Non-secure view of RPR Greg Bellows
2015-04-14 19:24 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 11/16] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Greg Bellows
2015-04-14 19:25 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 12/16] hw/intc/arm_gic: Change behavior of EOIR writes Greg Bellows
2015-04-14 19:30 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 13/16] hw/intc/arm_gic: Change behavior of IAR writes Greg Bellows
2015-04-14 19:31 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 14/16] hw/intc/arm_gic: Restrict priority view Greg Bellows
2015-04-14 19:32 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 15/16] hw/intc/arm_gic: Break out gic_update() function Greg Bellows
2015-04-14 19:36 ` Peter Maydell
2014-10-30 22:12 ` [Qemu-devel] [PATCH v2 16/16] hw/intc/arm_gic: add gic_update() for grouping Greg Bellows
2014-11-07 12:44 ` Daniel Thompson
2014-11-10 14:43 ` Greg Bellows
2014-11-10 16:13 ` Christoffer Dall
2015-04-14 19:39 ` Peter Maydell
2015-04-14 19:18 ` [Qemu-devel] [PATCH v2 00/16] target-arm: Add GICv1/SecExt and GICv2/Grouping Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414707132-24588-7-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=daniel.thompson@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).