From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Cam Macdonell" <cam@cs.ualberta.ca>,
qemu-stable@nongnu.org, "Stefan Hajnoczi" <stefanha@redhat.com>,
"Andreas Färber" <afaerber@suse.de>
Subject: [Qemu-devel] [PULL 30/35] ivshmem: Check ivshmem_read() size argument
Date: Fri, 31 Oct 2014 18:26:08 +0100 [thread overview]
Message-ID: <1414776373-9704-31-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1414776373-9704-1-git-send-email-pbonzini@redhat.com>
From: Stefan Hajnoczi <stefanha@redhat.com>
The third argument to the fd_read() callback implemented by
ivshmem_read() is the number of bytes, not a flags field. Fix this and
check we received enough bytes before accessing the buffer pointer.
Cc: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Handle partial reads via FIFO]
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/misc/ivshmem.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/hw/misc/ivshmem.c b/hw/misc/ivshmem.c
index bd9d718..caeee1e 100644
--- a/hw/misc/ivshmem.c
+++ b/hw/misc/ivshmem.c
@@ -24,6 +24,7 @@
#include "migration/migration.h"
#include "qapi/qmp/qerror.h"
#include "qemu/event_notifier.h"
+#include "qemu/fifo8.h"
#include "sysemu/char.h"
#include <sys/mman.h>
@@ -73,6 +74,7 @@ typedef struct IVShmemState {
CharDriverState **eventfd_chr;
CharDriverState *server_chr;
+ Fifo8 incoming_fifo;
MemoryRegion ivshmem_mmio;
/* We might need to register the BAR before we actually have the memory.
@@ -424,14 +426,35 @@ static void increase_dynamic_storage(IVShmemState *s, int new_min_size) {
}
}
-static void ivshmem_read(void *opaque, const uint8_t * buf, int flags)
+static void ivshmem_read(void *opaque, const uint8_t *buf, int size)
{
IVShmemState *s = opaque;
int incoming_fd, tmp_fd;
int guest_max_eventfd;
long incoming_posn;
- memcpy(&incoming_posn, buf, sizeof(long));
+ if (fifo8_is_empty(&s->incoming_fifo) && size == sizeof(incoming_posn)) {
+ memcpy(&incoming_posn, buf, size);
+ } else {
+ const uint8_t *p;
+ uint32_t num;
+
+ IVSHMEM_DPRINTF("short read of %d bytes\n", size);
+ num = MAX(size, sizeof(long) - fifo8_num_used(&s->incoming_fifo));
+ fifo8_push_all(&s->incoming_fifo, buf, num);
+ if (fifo8_num_used(&s->incoming_fifo) < sizeof(incoming_posn)) {
+ return;
+ }
+ size -= num;
+ buf += num;
+ p = fifo8_pop_buf(&s->incoming_fifo, sizeof(incoming_posn), &num);
+ g_assert(num == sizeof(incoming_posn));
+ memcpy(&incoming_posn, p, sizeof(incoming_posn));
+ if (size > 0) {
+ fifo8_push_all(&s->incoming_fifo, buf, size);
+ }
+ }
+
/* pick off s->server_chr->msgfd and store it, posn should accompany msg */
tmp_fd = qemu_chr_fe_get_msgfd(s->server_chr);
IVSHMEM_DPRINTF("posn is %ld, fd is %d\n", incoming_posn, tmp_fd);
@@ -663,6 +686,8 @@ static int pci_ivshmem_init(PCIDevice *dev)
s->ivshmem_size = ivshmem_get_size(s);
}
+ fifo8_create(&s->incoming_fifo, sizeof(long));
+
register_savevm(DEVICE(dev), "ivshmem", 0, 0, ivshmem_save, ivshmem_load,
dev);
@@ -796,6 +821,7 @@ static void pci_ivshmem_uninit(PCIDevice *dev)
memory_region_del_subregion(&s->bar, &s->ivshmem);
vmstate_unregister_ram(&s->ivshmem, DEVICE(dev));
unregister_savevm(DEVICE(dev), "ivshmem", s);
+ fifo8_destroy(&s->incoming_fifo);
}
static Property ivshmem_properties[] = {
--
1.8.3.1
next prev parent reply other threads:[~2014-10-31 17:27 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 17:25 [Qemu-devel] [PULL 00/35] Last batch of SCSI, KVM, ivshmem patches before soft freeze Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 01/35] rules.mak: Allow .mo-objs and .mo-cflags in -y variables Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 02/35] ui: Use the new ".mo-cflags" rule syntax for SDL_CFLAGS Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 03/35] scsi: Rename scsi_*_length() to scsi_*_xfer(), add scsi_cdb_length() Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 04/35] megasas: fixup MFI_DCMD_LD_LIST_QUERY Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 05/35] megasas: simplify trace event messages Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 06/35] megasas: fixup device mapping Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 07/35] megasas: add MegaRAID SAS 2108 emulation Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 08/35] megasas: Fix typo in megasas_dcmd_ld_get_list() Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 09/35] megasas: Decode register names Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 10/35] megasas: Clear unit attention on initial reset Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 11/35] megasas: Ignore duplicate init_firmware commands Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 12/35] megasas: Implement DCMD_CLUSTER_RESET_LD Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 13/35] megasas: Update queue logging Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 14/35] megasas: Rework frame queueing algorithm Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 15/35] megasas: Fixup MSI-X handling Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 16/35] -machine vmport=off: Allow disabling of VMWare ioport emulation Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 17/35] Add skip_dump flag to ignore memory region during dump Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 18/35] vl.c: Fix Coverity complaining for vmstate_dump_file Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 19/35] kvmvapic: patch_instruction fix Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 20/35] iscsi: Refuse to open as writable if the LUN is write protected Paolo Bonzini
2014-10-31 17:25 ` [Qemu-devel] [PULL 21/35] virtio-scsi: Fix memory leak when realize failed Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 22/35] scsi: devirtualize unrealize of SCSI devices Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 23/35] virtio-scsi: Fix num_queue input validation Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 24/35] kvm_stat: Only consider online cpus Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 25/35] kvm_stat: Fix the non-x86 exit reasons Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 26/35] kvm_stat: Rework platform detection Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 27/35] kvm_stat: Abstract ioctl numbers Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 28/35] kvm_stat: Add powerpc support Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 29/35] i386: fix breakpoints handling in icount mode Paolo Bonzini
2014-10-31 17:26 ` Paolo Bonzini [this message]
2014-10-31 17:26 ` [Qemu-devel] [PULL 31/35] ivshmem: validate incoming_posn value from server Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 32/35] ivshmem: Fix potential OOB r/w access Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 33/35] ivshmem: Fix fd leak on error Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 34/35] ivshmem: use error_report Paolo Bonzini
2014-10-31 17:26 ` [Qemu-devel] [PULL 35/35] virtio-scsi: fix dataplane Paolo Bonzini
2014-11-03 14:54 ` [Qemu-devel] [PULL 00/35] Last batch of SCSI, KVM, ivshmem patches before soft freeze Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414776373-9704-31-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=afaerber@suse.de \
--cc=cam@cs.ualberta.ca \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).