qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PULL 18/53] raw-posix: Fix raw_co_get_block_status() after EOF
Date: Mon,  3 Nov 2014 11:50:21 +0000	[thread overview]
Message-ID: <1415015456-25086-19-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1415015456-25086-1-git-send-email-stefanha@redhat.com>

From: Max Reitz <mreitz@redhat.com>

As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.

An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.

Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).

Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/raw-posix.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/block/raw-posix.c b/block/raw-posix.c
index 475cf74..a86b784 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1535,10 +1535,6 @@ static int64_t try_seek_hole(BlockDriverState *bs, off_t start, off_t *data,
 
     *hole = lseek(s->fd, start, SEEK_HOLE);
     if (*hole == -1) {
-        /* -ENXIO indicates that sector_num was past the end of the file.
-         * There is a virtual hole there.  */
-        assert(errno != -ENXIO);
-
         return -errno;
     }
 
@@ -1578,6 +1574,7 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
                                                     int nb_sectors, int *pnum)
 {
     off_t start, data = 0, hole = 0;
+    int64_t total_size;
     int64_t ret;
 
     ret = fd_open(bs);
@@ -1586,6 +1583,15 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
     }
 
     start = sector_num * BDRV_SECTOR_SIZE;
+    total_size = bdrv_getlength(bs);
+    if (total_size < 0) {
+        return total_size;
+    } else if (start >= total_size) {
+        *pnum = 0;
+        return 0;
+    } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
+        nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+    }
 
     ret = try_seek_hole(bs, start, &data, &hole, pnum);
     if (ret < 0) {
-- 
1.9.3

  parent reply	other threads:[~2014-11-03 11:51 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-03 11:50 [Qemu-devel] [PULL 00/53] Block patches Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 01/53] util: introduce MIN_NON_ZERO Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 02/53] BlockLimits: introduce max_transfer_length Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 03/53] block/iscsi: set max_transfer_length Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 04/53] block: avoid creating oversized writes in multiwrite_merge Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 05/53] block/iscsi: use sector_limits_lun2qemu throughout iscsi_refresh_limits Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 06/53] block/iscsi: check for oversized requests Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 07/53] ahci: Correct PIO/D2H FIS responses Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 08/53] ahci: Update byte count after DMA completion Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 09/53] ahci: Fix SDB FIS Construction Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 10/53] snapshot: Reset err to NULL to avoid double free Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 11/53] iotests: replace fake parallels image with authentic one Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 12/53] iotests: add v2 parallels sample image and simple test for it Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 13/53] block/parallels: fix access to not initialized memory in catalog_bitmap Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 14/53] rbd: Add support for bdrv_invalidate_cache Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 15/53] block.c: Fix type of IoOperationType variable in send_qmp_error_event() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 16/53] snapshot: add bdrv_drain_all() to bdrv_snapshot_delete() to avoid concurrency problem Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 17/53] block/curl: Improve type safety of s->timeout Stefan Hajnoczi
2014-11-03 11:50 ` Stefan Hajnoczi [this message]
2014-11-03 11:50 ` [Qemu-devel] [PULL 19/53] raw-posix: raw_co_get_block_status() return value Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 20/53] iotests: Add test for external image truncation Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 21/53] qcow2: Allow "full" discard Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 22/53] qcow2: Implement bdrv_make_empty() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 23/53] qcow2: Optimize bdrv_make_empty() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 24/53] blockjob: Introduce block_job_complete_sync() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 25/53] blockjob: Add "ready" field Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 26/53] iotests: Omit length/offset test in 040 and 041 Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 27/53] block/mirror: Improve progress report Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 28/53] qemu-img: Implement commit like QMP Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 29/53] qemu-img: Empty image after commit Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 30/53] qemu-img: Enable progress output for commit Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 31/53] qemu-img: Specify backing file " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 32/53] iotests: Add _filter_qemu_img_map Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 33/53] iotests: Add test for backing-chain commits Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 34/53] iotests: Add test for qcow2's bdrv_make_empty Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 35/53] block: qemu-iotest 107 supports NFS Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 36/53] block: Add status callback to bdrv_amend_options() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 37/53] qemu-img: Add progress output for amend Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 38/53] qemu-img: Fix insignificant memleak Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 39/53] block/qcow2: Implement status CB for amend Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 40/53] block/qcow2: Make get_refcount() global Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 41/53] block/qcow2: Simplify shared L2 handling in amend Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 42/53] iotests: Expand test 061 Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 43/53] block: acquire AioContext in generic blockjob QMP commands Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 44/53] blockdev: acquire AioContext in do_qmp_query_block_jobs_one() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 45/53] blockdev: acquire AioContext in blockdev_mark_auto_del() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 46/53] blockdev: add note that block_job_cb() must be thread-safe Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 47/53] blockjob: add block_job_defer_to_main_loop() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 48/53] block: add bdrv_drain() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 49/53] block: let backup blockjob run in BDS AioContext Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 50/53] block: let stream " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 51/53] block: let mirror " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 52/53] block: let commit " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 53/53] block: declare blockjobs and dataplane friends! Stefan Hajnoczi
2014-11-03 20:22 ` [Qemu-devel] [PULL 00/53] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415015456-25086-19-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).