From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Stefan Hajnoczi <stefanha@redhat.com>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PULL 40/53] block/qcow2: Make get_refcount() global
Date: Mon, 3 Nov 2014 11:50:43 +0000 [thread overview]
Message-ID: <1415015456-25086-41-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1415015456-25086-1-git-send-email-stefanha@redhat.com>
From: Max Reitz <mreitz@redhat.com>
Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/qcow2-refcount.c | 26 +++++++++++++-------------
block/qcow2.h | 2 ++
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 1477031..9afdb40 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -91,7 +91,7 @@ static int load_refcount_block(BlockDriverState *bs,
* return value is the refcount of the cluster, negative values are -errno
* and indicate an error.
*/
-static int get_refcount(BlockDriverState *bs, int64_t cluster_index)
+int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index)
{
BDRVQcowState *s = bs->opaque;
uint64_t refcount_table_index, block_index;
@@ -629,8 +629,7 @@ fail:
}
/*
- * Increases or decreases the refcount of a given cluster by one.
- * addend must be 1 or -1.
+ * Increases or decreases the refcount of a given cluster.
*
* If the return value is non-negative, it is the new refcount of the cluster.
* If it is negative, it is -errno and indicates an error.
@@ -649,7 +648,7 @@ int qcow2_update_cluster_refcount(BlockDriverState *bs,
return ret;
}
- return get_refcount(bs, cluster_index);
+ return qcow2_get_refcount(bs, cluster_index);
}
@@ -670,7 +669,7 @@ static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size)
retry:
for(i = 0; i < nb_clusters; i++) {
uint64_t next_cluster_index = s->free_cluster_index++;
- refcount = get_refcount(bs, next_cluster_index);
+ refcount = qcow2_get_refcount(bs, next_cluster_index);
if (refcount < 0) {
return refcount;
@@ -734,7 +733,7 @@ int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
/* Check how many clusters there are free */
cluster_index = offset >> s->cluster_bits;
for(i = 0; i < nb_clusters; i++) {
- refcount = get_refcount(bs, cluster_index++);
+ refcount = qcow2_get_refcount(bs, cluster_index++);
if (refcount < 0) {
return refcount;
@@ -981,7 +980,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
cluster_index, addend,
QCOW2_DISCARD_SNAPSHOT);
} else {
- refcount = get_refcount(bs, cluster_index);
+ refcount = qcow2_get_refcount(bs, cluster_index);
}
if (refcount < 0) {
@@ -1021,7 +1020,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
refcount = qcow2_update_cluster_refcount(bs, l2_offset >>
s->cluster_bits, addend, QCOW2_DISCARD_SNAPSHOT);
} else {
- refcount = get_refcount(bs, l2_offset >> s->cluster_bits);
+ refcount = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits);
}
if (refcount < 0) {
ret = refcount;
@@ -1332,8 +1331,8 @@ fail:
* Checks the OFLAG_COPIED flag for all L1 and L2 entries.
*
* This function does not print an error message nor does it increment
- * check_errors if get_refcount fails (this is because such an error will have
- * been already detected and sufficiently signaled by the calling function
+ * check_errors if qcow2_get_refcount fails (this is because such an error will
+ * have been already detected and sufficiently signaled by the calling function
* (qcow2_check_refcounts) by the time this function is called).
*/
static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
@@ -1354,7 +1353,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
continue;
}
- refcount = get_refcount(bs, l2_offset >> s->cluster_bits);
+ refcount = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits);
if (refcount < 0) {
/* don't print message nor increment check_errors */
continue;
@@ -1396,7 +1395,8 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
if ((cluster_type == QCOW2_CLUSTER_NORMAL) ||
((cluster_type == QCOW2_CLUSTER_ZERO) && (data_offset != 0))) {
- refcount = get_refcount(bs, data_offset >> s->cluster_bits);
+ refcount = qcow2_get_refcount(bs,
+ data_offset >> s->cluster_bits);
if (refcount < 0) {
/* don't print message nor increment check_errors */
continue;
@@ -1632,7 +1632,7 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
int refcount1, refcount2, ret;
for (i = 0, *highest_cluster = 0; i < nb_clusters; i++) {
- refcount1 = get_refcount(bs, i);
+ refcount1 = qcow2_get_refcount(bs, i);
if (refcount1 < 0) {
fprintf(stderr, "Can't get refcount for cluster %" PRId64 ": %s\n",
i, strerror(-refcount1));
diff --git a/block/qcow2.h b/block/qcow2.h
index 21ac8ce..6e39a1b 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -487,6 +487,8 @@ void qcow2_signal_corruption(BlockDriverState *bs, bool fatal, int64_t offset,
int qcow2_refcount_init(BlockDriverState *bs);
void qcow2_refcount_close(BlockDriverState *bs);
+int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index);
+
int qcow2_update_cluster_refcount(BlockDriverState *bs, int64_t cluster_index,
int addend, enum qcow2_discard_type type);
--
1.9.3
next prev parent reply other threads:[~2014-11-03 11:52 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-03 11:50 [Qemu-devel] [PULL 00/53] Block patches Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 01/53] util: introduce MIN_NON_ZERO Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 02/53] BlockLimits: introduce max_transfer_length Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 03/53] block/iscsi: set max_transfer_length Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 04/53] block: avoid creating oversized writes in multiwrite_merge Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 05/53] block/iscsi: use sector_limits_lun2qemu throughout iscsi_refresh_limits Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 06/53] block/iscsi: check for oversized requests Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 07/53] ahci: Correct PIO/D2H FIS responses Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 08/53] ahci: Update byte count after DMA completion Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 09/53] ahci: Fix SDB FIS Construction Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 10/53] snapshot: Reset err to NULL to avoid double free Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 11/53] iotests: replace fake parallels image with authentic one Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 12/53] iotests: add v2 parallels sample image and simple test for it Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 13/53] block/parallels: fix access to not initialized memory in catalog_bitmap Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 14/53] rbd: Add support for bdrv_invalidate_cache Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 15/53] block.c: Fix type of IoOperationType variable in send_qmp_error_event() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 16/53] snapshot: add bdrv_drain_all() to bdrv_snapshot_delete() to avoid concurrency problem Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 17/53] block/curl: Improve type safety of s->timeout Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 18/53] raw-posix: Fix raw_co_get_block_status() after EOF Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 19/53] raw-posix: raw_co_get_block_status() return value Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 20/53] iotests: Add test for external image truncation Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 21/53] qcow2: Allow "full" discard Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 22/53] qcow2: Implement bdrv_make_empty() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 23/53] qcow2: Optimize bdrv_make_empty() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 24/53] blockjob: Introduce block_job_complete_sync() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 25/53] blockjob: Add "ready" field Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 26/53] iotests: Omit length/offset test in 040 and 041 Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 27/53] block/mirror: Improve progress report Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 28/53] qemu-img: Implement commit like QMP Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 29/53] qemu-img: Empty image after commit Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 30/53] qemu-img: Enable progress output for commit Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 31/53] qemu-img: Specify backing file " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 32/53] iotests: Add _filter_qemu_img_map Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 33/53] iotests: Add test for backing-chain commits Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 34/53] iotests: Add test for qcow2's bdrv_make_empty Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 35/53] block: qemu-iotest 107 supports NFS Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 36/53] block: Add status callback to bdrv_amend_options() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 37/53] qemu-img: Add progress output for amend Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 38/53] qemu-img: Fix insignificant memleak Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 39/53] block/qcow2: Implement status CB for amend Stefan Hajnoczi
2014-11-03 11:50 ` Stefan Hajnoczi [this message]
2014-11-03 11:50 ` [Qemu-devel] [PULL 41/53] block/qcow2: Simplify shared L2 handling in amend Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 42/53] iotests: Expand test 061 Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 43/53] block: acquire AioContext in generic blockjob QMP commands Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 44/53] blockdev: acquire AioContext in do_qmp_query_block_jobs_one() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 45/53] blockdev: acquire AioContext in blockdev_mark_auto_del() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 46/53] blockdev: add note that block_job_cb() must be thread-safe Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 47/53] blockjob: add block_job_defer_to_main_loop() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 48/53] block: add bdrv_drain() Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 49/53] block: let backup blockjob run in BDS AioContext Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 50/53] block: let stream " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 51/53] block: let mirror " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 52/53] block: let commit " Stefan Hajnoczi
2014-11-03 11:50 ` [Qemu-devel] [PULL 53/53] block: declare blockjobs and dataplane friends! Stefan Hajnoczi
2014-11-03 20:22 ` [Qemu-devel] [PULL 00/53] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415015456-25086-41-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=mreitz@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).