From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, serge.fdrv@gmail.com,
edgar.iglesias@gmail.com, aggelerf@ethz.ch,
peter.maydell@linaro.org
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v9 18/26] target-arm: make DACR banked
Date: Wed, 5 Nov 2014 17:23:05 -0600 [thread overview]
Message-ID: <1415229793-3278-19-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1415229793-3278-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DACR has a secure and a non-secure instance. Adds definition for DACR32_EL2.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
v8 -> v9
- Added definition for DACR32_EL2
- Changed dacr cp15 fields to uint64_t
---
hw/arm/pxa2xx.c | 2 +-
target-arm/cpu.h | 13 +++++++++++--
target-arm/helper.c | 28 ++++++++++++++++++----------
3 files changed, 30 insertions(+), 13 deletions(-)
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 2b00b59..8967cc4 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -276,7 +276,7 @@ static void pxa2xx_pwrmode_write(CPUARMState *env, const ARMCPRegInfo *ri,
s->cpu->env.cp15.sctlr_ns = 0;
s->cpu->env.cp15.c1_coproc = 0;
s->cpu->env.cp15.ttbr0_el[1] = 0;
- s->cpu->env.cp15.c3 = 0;
+ s->cpu->env.cp15.dacr_ns = 0;
s->pm_regs[PSSR >> 2] |= 0x8; /* Set STS */
s->pm_regs[RCSR >> 2] |= 0x8; /* Set GPR */
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index cd68d62..621edf5 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -227,8 +227,17 @@ typedef struct CPUARMState {
TCR tcr_el[4];
uint32_t c2_data; /* MPU data cachable bits. */
uint32_t c2_insn; /* MPU instruction cachable bits. */
- uint32_t c3; /* MMU domain access control register
- MPU write buffer control. */
+ union { /* MMU domain access control register
+ * MPU write buffer control.
+ */
+ struct {
+ uint64_t dacr_ns;
+ uint64_t dacr_s;
+ };
+ struct {
+ uint64_t dacr32_el2;
+ };
+ };
uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
uint64_t hcr_el2; /* Hypervisor configuration register */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 1a49c98..405953b 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -440,10 +440,12 @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = {
* definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]).
*/
/* MMU Domain access control / MPU write buffer control */
- { .name = "DACR", .cp = 15,
- .crn = 3, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c3),
- .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, },
+ { .name = "DACR",
+ .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .resetvalue = 0,
+ .writefn = dacr_write, .raw_writefn = raw_write,
+ .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
+ offsetoflow32(CPUARMState, cp15.dacr_ns) } },
/* ??? This covers not just the impdef TLB lockdown registers but also
* some v7VMSA registers relating to TEX remap, so it is overly broad.
*/
@@ -2257,10 +2259,11 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
{ .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
.type = ARM_CP_NOP, .access = PL1_W },
/* MMU Domain access control / MPU write buffer control */
- { .name = "DACR", .cp = 15,
- .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c3),
- .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, },
+ { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0,
+ .writefn = dacr_write, .raw_writefn = raw_write,
+ .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
+ offsetoflow32(CPUARMState, cp15.dacr_ns) } },
{ .name = "ELR_EL1", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 1,
@@ -2330,6 +2333,11 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
.writefn = hcr_write },
+ { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0,
+ .access = PL2_RW, .resetvalue = 0,
+ .writefn = dacr_write, .raw_writefn = raw_write,
+ .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) },
{ .name = "ELR_EL2", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4518,7 +4526,7 @@ static int get_phys_addr_v5(CPUARMState *env, uint32_t address, int access_type,
desc = ldl_phys(cs->as, table);
type = (desc & 3);
domain = (desc >> 5) & 0x0f;
- domain_prot = (env->cp15.c3 >> (domain * 2)) & 3;
+ domain_prot = (A32_BANKED_CURRENT_REG_GET(env, dacr) >> (domain * 2)) & 3;
if (type == 0) {
/* Section translation fault. */
code = 5;
@@ -4630,7 +4638,7 @@ static int get_phys_addr_v6(CPUARMState *env, uint32_t address, int access_type,
/* Page or Section. */
domain = (desc >> 5) & 0x0f;
}
- domain_prot = (env->cp15.c3 >> (domain * 2)) & 3;
+ domain_prot = (A32_BANKED_CURRENT_REG_GET(env, dacr) >> (domain * 2)) & 3;
if (domain_prot == 0 || domain_prot == 2) {
if (type != 1) {
code = 9; /* Section domain fault. */
--
1.8.3.2
next prev parent reply other threads:[~2014-11-05 23:24 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-05 23:22 [Qemu-devel] [PATCH v9 00/26] target-arm: add Security Extensions for CPUs Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 01/26] target-arm: extend async excp masking Greg Bellows
2014-11-05 23:37 ` Peter Maydell
2014-11-06 1:29 ` Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 02/26] target-arm: add async excp target_el function Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 03/26] target-arm: add banked register accessors Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 04/26] target-arm: add non-secure Translation Block flag Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 05/26] target-arm: add CPREG secure state support Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 06/26] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 07/26] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 08/26] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 09/26] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 10/26] target-arm: add NSACR register Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 11/26] target-arm: add SDER definition Greg Bellows
2014-11-05 23:22 ` [Qemu-devel] [PATCH v9 12/26] target-arm: add MVBAR support Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 13/26] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 14/26] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 15/26] target-arm: make CSSELR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 16/26] target-arm: make TTBR0/1 banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 17/26] target-arm: make TTBCR banked Greg Bellows
2014-11-05 23:23 ` Greg Bellows [this message]
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 19/26] target-arm: make IFSR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 20/26] target-arm: make DFSR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 21/26] target-arm: make IFAR/DFAR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 22/26] target-arm: make PAR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 23/26] target-arm: make VBAR banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 24/26] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 25/26] target-arm: make MAIR0/1 banked Greg Bellows
2014-11-05 23:23 ` [Qemu-devel] [PATCH v9 26/26] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415229793-3278-19-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).