From: Chengyu Song <csong84@gatech.edu>
To: qemu-devel@nongnu.org
Cc: Chengyu Song <csong84@gatech.edu>
Subject: [Qemu-devel] [PATCH] ARM64: support access to more performance registers in AA64 mode
Date: Wed, 3 Dec 2014 02:12:18 -0500 [thread overview]
Message-ID: <1417590738-29072-1-git-send-email-csong84@gatech.edu> (raw)
In AA64 mode, certain system registers are access through MSR/MRS
instructions instead of MCR/MRC. This patch added more such registers:
/* ARMv8 manual, D8.4.10 */
PMINTENCLR_EL1
/* ARMv8 manual, D8.4.11 */
PMINTENSET_EL1
/* ARMv8 manual, D8.4.12 */
PMOVSCLR_EL0
/* ARMv8 manual, D8.4.14 */
PMSELR_EL0
/* ARMv8 manual, D8.4.15 */
PMSWINC_EL0
/* ARMv8 manual, D8.4.16 */
PMUSERENR_EL0
/* ARMv8 manual, D8.4.17 */
PMXEVCNTR_EL0
/* ARMv8 manual, D8.4.18 */
PMXEVTYPER_EL0
Signed-off-by: Chengyu Song <csong84@gatech.edu>
---
target-arm/helper.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index b74d348..43b5b06 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -843,15 +843,28 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.accessfn = pmreg_access,
.writefn = pmovsr_write,
.raw_writefn = raw_write },
+ { .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 12, .opc1 = 3, .opc2 = 3,
+ .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
+ .accessfn = pmreg_access,
+ .writefn = pmovsr_write,
+ .raw_writefn = raw_write },
/* Unimplemented so WI. */
{ .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
.access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
+ { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 12, .opc1 = 3, .opc2 = 4,
+ .access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
/* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
* We choose to RAZ/WI.
*/
{ .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
.access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
.accessfn = pmreg_access },
+ { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 12, .opc1 = 3, .opc2 = 5,
+ .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
+ .accessfn = pmreg_access },
#ifndef CONFIG_USER_ONLY
{ .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
.access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO,
@@ -875,24 +888,51 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
.accessfn = pmreg_access, .writefn = pmxevtyper_write,
.raw_writefn = raw_write },
+ { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 13, .opc1 = 3, .opc2 = 1,
+ .access = PL0_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
+ .accessfn = pmreg_access, .writefn = pmxevtyper_write,
+ .raw_writefn = raw_write },
/* Unimplemented, RAZ/WI. */
{ .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
.access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
.accessfn = pmreg_access },
+ { .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 13, .opc1 = 3, .opc2 = 2,
+ .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
+ .accessfn = pmreg_access },
{ .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
.access = PL0_R | PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
.resetvalue = 0,
.writefn = pmuserenr_write, .raw_writefn = raw_write },
+ { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 14, .opc1 = 3, .opc2 = 0,
+ .access = PL0_R | PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
+ .resetvalue = 0,
+ .writefn = pmuserenr_write, .raw_writefn = raw_write },
{ .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
.access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
.resetvalue = 0,
.writefn = pmintenset_write, .raw_writefn = raw_write },
+ { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+ .resetvalue = 0,
+ .writefn = pmintenset_write, .raw_writefn = raw_write },
{ .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
.resetvalue = 0, .writefn = pmintenclr_write, },
+ { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+ .resetvalue = 0, .writefn = pmintenclr_write, },
{ .name = "VBAR", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .writefn = vbar_write,
--
2.1.0
next reply other threads:[~2014-12-03 7:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-03 7:12 Chengyu Song [this message]
2014-12-03 20:25 ` [Qemu-devel] [PATCH] ARM64: support access to more performance registers in AA64 mode Christopher Covington
2014-12-03 20:45 ` Peter Maydell
2014-12-03 20:53 ` Chengyu Song
2014-12-03 21:12 ` Peter Maydell
2014-12-06 21:07 ` Chengyu Song
2014-12-06 21:11 ` Chengyu Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417590738-29072-1-git-send-email-csong84@gatech.edu \
--to=csong84@gatech.edu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).