qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Max Reitz <mreitz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v4 06/26] qcow2: Use 64 bits for refcount values
Date: Wed,  3 Dec 2014 14:37:26 +0100	[thread overview]
Message-ID: <1417613866-25890-7-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1417613866-25890-1-git-send-email-mreitz@redhat.com>

Refcounts may have a width of up to 64 bits, so qemu should use the same
width to represent refcount values internally.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/qcow2-cluster.c  |  2 +-
 block/qcow2-refcount.c | 42 ++++++++++++++++++++----------------------
 block/qcow2.h          |  4 ++--
 3 files changed, 23 insertions(+), 25 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index da37535..5a678f3 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1640,7 +1640,7 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
     for (i = 0; i < l1_size; i++) {
         uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK;
         bool l2_dirty = false;
-        uint16_t l2_refcount;
+        uint64_t l2_refcount;
 
         if (!l2_offset) {
             /* unallocated */
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index b3aed9c..095ff9b 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -29,7 +29,7 @@
 
 static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size);
 static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
-                            int64_t offset, int64_t length, uint16_t addend,
+                            int64_t offset, int64_t length, uint64_t addend,
                             bool decrease, enum qcow2_discard_type type);
 
 
@@ -91,7 +91,7 @@ static int load_refcount_block(BlockDriverState *bs,
  * *refcount. Returns 0 on success and -errno on failure.
  */
 int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index,
-                       uint16_t *refcount)
+                       uint64_t *refcount)
 {
     BDRVQcowState *s = bs->opaque;
     uint64_t refcount_table_index, block_index;
@@ -537,7 +537,7 @@ found:
 static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
                                                    int64_t offset,
                                                    int64_t length,
-                                                   uint16_t addend,
+                                                   uint64_t addend,
                                                    bool decrease,
                                                    enum qcow2_discard_type type)
 {
@@ -549,8 +549,8 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
 
 #ifdef DEBUG_ALLOC2
     fprintf(stderr, "update_refcount: offset=%" PRId64 " size=%" PRId64
-            " addend=%" PRId16 " decrease=%d\n", offset, length,
-            (int16_t)addend, decrease);
+            " addend=%" PRId64 " decrease=%d\n", offset, length,
+            (int64_t)addend, decrease);
 #endif
     if (length < 0) {
         return -EINVAL;
@@ -569,7 +569,7 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
         cluster_offset += s->cluster_size)
     {
         int block_index;
-        uint16_t refcount;
+        uint64_t refcount;
         int64_t cluster_index = cluster_offset >> s->cluster_bits;
         int64_t table_index = cluster_index >> s->refcount_block_bits;
 
@@ -596,9 +596,9 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
         block_index = cluster_index & (s->refcount_block_size - 1);
 
         refcount = be16_to_cpu(refcount_block[block_index]);
-        if ((uint16_t)(refcount + addend) > s->refcount_max ||
-            (!decrease && (uint16_t)(refcount + addend) < refcount) ||
-            ( decrease && (uint16_t)(refcount + addend) > refcount))
+        if (refcount + addend > s->refcount_max ||
+            (!decrease && refcount + addend < refcount) ||
+            ( decrease && refcount + addend > refcount))
         {
             ret = -EINVAL;
             goto fail;
@@ -656,7 +656,7 @@ fail:
  */
 int qcow2_update_cluster_refcount(BlockDriverState *bs,
                                   int64_t cluster_index,
-                                  uint16_t addend, bool decrease,
+                                  uint64_t addend, bool decrease,
                                   enum qcow2_discard_type type)
 {
     BDRVQcowState *s = bs->opaque;
@@ -682,8 +682,7 @@ int qcow2_update_cluster_refcount(BlockDriverState *bs,
 static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size)
 {
     BDRVQcowState *s = bs->opaque;
-    uint64_t i, nb_clusters;
-    uint16_t refcount;
+    uint64_t i, nb_clusters, refcount;
     int ret;
 
     nb_clusters = size_to_clusters(s, size);
@@ -741,9 +740,8 @@ int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
     int nb_clusters)
 {
     BDRVQcowState *s = bs->opaque;
-    uint64_t cluster_index;
+    uint64_t cluster_index, refcount;
     uint64_t i;
-    uint16_t refcount;
     int ret;
 
     assert(nb_clusters >= 0);
@@ -897,11 +895,10 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
     int64_t l1_table_offset, int l1_size, int addend)
 {
     BDRVQcowState *s = bs->opaque;
-    uint64_t *l1_table, *l2_table, l2_offset, offset, l1_size2;
+    uint64_t *l1_table, *l2_table, l2_offset, offset, l1_size2, refcount;
     bool l1_allocated = false;
     int64_t old_offset, old_l2_offset;
     int i, j, l1_modified = 0, nb_csectors;
-    uint16_t refcount;
     int ret;
 
     l2_table = NULL;
@@ -1368,7 +1365,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
     BDRVQcowState *s = bs->opaque;
     uint64_t *l2_table = qemu_blockalign(bs, s->cluster_size);
     int ret;
-    uint16_t refcount;
+    uint64_t refcount;
     int i, j;
 
     for (i = 0; i < s->l1_size; i++) {
@@ -1388,7 +1385,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
         }
         if ((refcount == 1) != ((l1_entry & QCOW_OFLAG_COPIED) != 0)) {
             fprintf(stderr, "%s OFLAG_COPIED L2 cluster: l1_index=%d "
-                    "l1_entry=%" PRIx64 " refcount=%d\n",
+                    "l1_entry=%" PRIx64 " refcount=%" PRIu64 "\n",
                     fix & BDRV_FIX_ERRORS ? "Repairing" :
                                             "ERROR",
                     i, l1_entry, refcount);
@@ -1432,7 +1429,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
                 }
                 if ((refcount == 1) != ((l2_entry & QCOW_OFLAG_COPIED) != 0)) {
                     fprintf(stderr, "%s OFLAG_COPIED data cluster: "
-                            "l2_entry=%" PRIx64 " refcount=%d\n",
+                            "l2_entry=%" PRIx64 " refcount=%" PRIu64 "\n",
                             fix & BDRV_FIX_ERRORS ? "Repairing" :
                                                     "ERROR",
                             l2_entry, refcount);
@@ -1658,7 +1655,7 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
 {
     BDRVQcowState *s = bs->opaque;
     int64_t i;
-    uint16_t refcount1, refcount2;
+    uint64_t refcount1, refcount2;
     int ret;
 
     for (i = 0, *highest_cluster = 0; i < nb_clusters; i++) {
@@ -1687,7 +1684,8 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
                 num_fixed = &res->corruptions_fixed;
             }
 
-            fprintf(stderr, "%s cluster %" PRId64 " refcount=%d reference=%d\n",
+            fprintf(stderr, "%s cluster %" PRId64 " refcount=%" PRIu64
+                    " reference=%" PRIu64 "\n",
                    num_fixed != NULL     ? "Repairing" :
                    refcount1 < refcount2 ? "ERROR" :
                                            "Leaked",
@@ -1698,7 +1696,7 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
                                       refcount2 - refcount1,
                                       refcount1 > refcount2,
                                       QCOW2_DISCARD_ALWAYS);
-                if (ret >= 0) {
+                if (ret == 0) {
                     (*num_fixed)++;
                     continue;
                 }
diff --git a/block/qcow2.h b/block/qcow2.h
index 0240ee8..adf515c 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -490,10 +490,10 @@ int qcow2_refcount_init(BlockDriverState *bs);
 void qcow2_refcount_close(BlockDriverState *bs);
 
 int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index,
-                       uint16_t *refcount);
+                       uint64_t *refcount);
 
 int qcow2_update_cluster_refcount(BlockDriverState *bs, int64_t cluster_index,
-                                  uint16_t addend, bool decrease,
+                                  uint64_t addend, bool decrease,
                                   enum qcow2_discard_type type);
 
 int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size);
-- 
1.9.3

  parent reply	other threads:[~2014-12-03 13:38 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-03 13:37 [Qemu-devel] [PATCH v4 00/26] qcow2: Support refcount orders != 4 Max Reitz
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 01/26] qcow2: Add two new fields to BDRVQcowState Max Reitz
2014-12-03 14:51   ` Eric Blake
2014-12-10 15:08   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 02/26] qcow2: Add refcount_bits to format-specific info Max Reitz
2014-12-03 15:09   ` Eric Blake
2014-12-10 15:14   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 03/26] qcow2: Do not return new value after refcount update Max Reitz
2014-12-03 15:13   ` Eric Blake
2014-12-10 15:15   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 04/26] qcow2: Only return status from qcow2_get_refcount Max Reitz
2014-12-03 15:37   ` Eric Blake
2014-12-10 15:32   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 05/26] qcow2: Use unsigned addend for update_refcount() Max Reitz
2014-12-03 15:55   ` Eric Blake
2014-12-11 10:58   ` Stefan Hajnoczi
2014-12-11 11:03     ` Max Reitz
2014-12-12 11:07       ` Stefan Hajnoczi
2014-12-03 13:37 ` Max Reitz [this message]
2014-12-03 16:11   ` [Qemu-devel] [PATCH v4 06/26] qcow2: Use 64 bits for refcount values Eric Blake
2014-12-03 16:18     ` Max Reitz
2014-12-11 11:04   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 07/26] qcow2: Respect error in qcow2_alloc_bytes() Max Reitz
2014-12-03 17:12   ` Eric Blake
2014-12-11 11:10   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 08/26] qcow2: Refcount overflow and qcow2_alloc_bytes() Max Reitz
2014-12-03 17:41   ` Eric Blake
2014-12-11 11:12   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 09/26] qcow2: Helper for refcount array reallocation Max Reitz
2014-12-03 18:00   ` Eric Blake
2014-12-11 11:26   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 10/26] qcow2: Helper function for refcount modification Max Reitz
2014-12-03 18:48   ` Eric Blake
2014-12-11 13:36   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 11/26] qcow2: More helpers " Max Reitz
2014-12-03 19:17   ` Eric Blake
2014-12-11 13:40   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 12/26] qcow2: Open images with refcount order != 4 Max Reitz
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 13/26] qcow2: refcount_order parameter for qcow2_create2 Max Reitz
2014-12-03 19:29   ` Eric Blake
2014-12-11 13:41   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 14/26] qcow2: Use symbolic macros in qcow2_amend_options Max Reitz
2014-12-03 19:48   ` Eric Blake
2014-12-11 14:05   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 15/26] iotests: Prepare for refcount_bits option Max Reitz
2014-12-03 22:05   ` Eric Blake
2014-12-11 14:26   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 16/26] qcow2: Allow creation with refcount order != 4 Max Reitz
2014-12-03 23:02   ` Eric Blake
2014-12-11 14:41   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 17/26] progress: Allow regressing progress Max Reitz
2014-12-03 23:03   ` Eric Blake
2014-12-11 14:41   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 18/26] block: Add opaque value to the amend CB Max Reitz
2014-12-11 14:42   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 19/26] qcow2: Use error_report() in qcow2_amend_options() Max Reitz
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 20/26] qcow2: Use abort() instead of assert(false) Max Reitz
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 21/26] qcow2: Split upgrade/downgrade paths for amend Max Reitz
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 22/26] qcow2: Use intermediate helper CB " Max Reitz
2014-12-11 14:44   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 23/26] qcow2: Add function for refcount order amendment Max Reitz
2014-12-03 23:30   ` Eric Blake
2014-12-11 17:08   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 24/26] qcow2: Invoke refcount order amendment function Max Reitz
2014-12-03 23:35   ` Eric Blake
2014-12-11 14:46   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 25/26] qcow2: Point to amend function in check Max Reitz
2014-12-11 14:46   ` Stefan Hajnoczi
2014-12-03 13:37 ` [Qemu-devel] [PATCH v4 26/26] iotests: Add test for different refcount widths Max Reitz
2014-12-04  0:03   ` Eric Blake
2014-12-04  9:51     ` Max Reitz
2014-12-04 19:10       ` Eric Blake
2014-12-05  9:02         ` Max Reitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417613866-25890-7-git-send-email-mreitz@redhat.com \
    --to=mreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).