qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 18/33] target-arm: make TTBR0/1 banked
Date: Thu, 11 Dec 2014 12:19:40 +0000	[thread overview]
Message-ID: <1418300395-4348-19-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1418300395-4348-1-git-send-email-peter.maydell@linaro.org>

From: Fabian Aggeler <aggelerf@ethz.ch>

Adds secure and non-secure bank register suport for TTBR0 and TTBR1.
Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as
well as a CP register definition for TTBR0_EL3.  Added a union containing
both EL based array fields and secure and non-secure fields mapped to them.
Updated accesses to use A32_BANKED_CURRENT_REG_GET macro.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-17-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/pxa2xx.c     |  2 +-
 target-arm/cpu.h    | 20 ++++++++++++++++++--
 target-arm/helper.c | 37 +++++++++++++++++++++++++------------
 3 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 11d51af..2b00b59 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -275,7 +275,7 @@ static void pxa2xx_pwrmode_write(CPUARMState *env, const ARMCPRegInfo *ri,
         s->cpu->env.daif = PSTATE_A | PSTATE_F | PSTATE_I;
         s->cpu->env.cp15.sctlr_ns = 0;
         s->cpu->env.cp15.c1_coproc = 0;
-        s->cpu->env.cp15.ttbr0_el1 = 0;
+        s->cpu->env.cp15.ttbr0_el[1] = 0;
         s->cpu->env.cp15.c3 = 0;
         s->pm_regs[PSSR >> 2] |= 0x8; /* Set STS */
         s->pm_regs[RCSR >> 2] |= 0x8; /* Set GPR */
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index f06d209..efe7010 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -199,8 +199,24 @@ typedef struct CPUARMState {
         uint32_t c1_xscaleauxcr; /* XScale auxiliary control register.  */
         uint64_t sder; /* Secure debug enable register. */
         uint32_t nsacr; /* Non-secure access control register. */
-        uint64_t ttbr0_el1; /* MMU translation table base 0. */
-        uint64_t ttbr1_el1; /* MMU translation table base 1. */
+        union { /* MMU translation table base 0. */
+            struct {
+                uint64_t _unused_ttbr0_0;
+                uint64_t ttbr0_ns;
+                uint64_t _unused_ttbr0_1;
+                uint64_t ttbr0_s;
+            };
+            uint64_t ttbr0_el[4];
+        };
+        union { /* MMU translation table base 1. */
+            struct {
+                uint64_t _unused_ttbr1_0;
+                uint64_t ttbr1_ns;
+                uint64_t _unused_ttbr1_1;
+                uint64_t ttbr1_s;
+            };
+            uint64_t ttbr1_el[4];
+        };
         uint64_t c2_control; /* MMU translation table base control.  */
         uint32_t c2_mask; /* MMU translation table base selection mask.  */
         uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 961dd37..171b841 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1646,13 +1646,15 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .access = PL1_RW,
       .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
     { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
-      .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+      .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
+      .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+                             offsetof(CPUARMState, cp15.ttbr0_ns) } },
     { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
-      .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+      .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
+      .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+                             offsetof(CPUARMState, cp15.ttbr1_ns) } },
     { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
       .access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1883,11 +1885,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
     { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
-      .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+                             offsetof(CPUARMState, cp15.ttbr0_ns) },
       .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
     { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
-      .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+                             offsetof(CPUARMState, cp15.ttbr1_ns) },
       .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
     REGINFO_SENTINEL
 };
@@ -2341,6 +2345,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0,
       .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
       .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]) },
+    { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 0,
+      .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) },
     { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_NO_MIGRATE,
       .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4442,18 +4450,23 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot,
 static bool get_level1_table_address(CPUARMState *env, uint32_t *table,
                                          uint32_t address)
 {
+    /* We only get here if EL1 is running in AArch32. If EL3 is running in
+     * AArch32 there is a secure and non-secure instance of the translation
+     * table registers.
+     */
     if (address & env->cp15.c2_mask) {
         if ((env->cp15.c2_control & TTBCR_PD1)) {
             /* Translation table walk disabled for TTBR1 */
             return false;
         }
-        *table = env->cp15.ttbr1_el1 & 0xffffc000;
+        *table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
     } else {
         if ((env->cp15.c2_control & TTBCR_PD0)) {
             /* Translation table walk disabled for TTBR0 */
             return false;
         }
-        *table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+        *table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) &
+                 env->cp15.c2_base_mask;
     }
     *table |= (address >> 18) & 0x3ffc;
     return true;
@@ -4758,7 +4771,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
      * we will always flush the TLB any time the ASID is changed).
      */
     if (ttbr_select == 0) {
-        ttbr = env->cp15.ttbr0_el1;
+        ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
         epd = extract32(env->cp15.c2_control, 7, 1);
         tsz = t0sz;
 
@@ -4770,7 +4783,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
             granule_sz = 11;
         }
     } else {
-        ttbr = env->cp15.ttbr1_el1;
+        ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
         epd = extract32(env->cp15.c2_control, 23, 1);
         tsz = t1sz;
 
-- 
1.9.1

  parent reply	other threads:[~2014-12-11 12:20 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-11 12:19 [Qemu-devel] [PULL 00/33] target-arm queue Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 01/33] Pass semihosting exit code back to system Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 02/33] Add the "-semihosting-config" option Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 03/33] target-arm: extend async excp masking Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 04/33] target-arm: add async excp target_el function Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 05/33] target-arm: add banked register accessors Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 06/33] target-arm: add non-secure Translation Block flag Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 07/33] target-arm: add CPREG secure state support Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 08/33] target-arm: add secure state bit to CPREG hash Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 09/33] target-arm: insert AArch32 cpregs twice into hashtable Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 10/33] target-arm: move AArch32 SCR into security reglist Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 11/33] target-arm: implement IRQ/FIQ routing to Monitor mode Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 12/33] target-arm: add NSACR register Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 13/33] target-arm: add SDER definition Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 14/33] target-arm: add MVBAR support Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 15/33] target-arm: add SCTLR_EL3 and make SCTLR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 16/33] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 17/33] target-arm: make CSSELR banked Peter Maydell
2014-12-11 12:19 ` Peter Maydell [this message]
2014-12-11 12:19 ` [Qemu-devel] [PULL 19/33] target-arm: make TTBCR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 20/33] target-arm: make DACR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 21/33] target-arm: make IFSR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 22/33] target-arm: make DFSR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 23/33] target-arm: make IFAR/DFAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 24/33] target-arm: make PAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 25/33] target-arm: make VBAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 26/33] target-arm: make c13 cp regs banked (FCSEIDR, ...) Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 27/33] target-arm: make MAIR0/1 banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 28/33] hw/arm/realview.c: Fix memory leak in realview_init() Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 29/33] hw/arm/boot: fix uninitialized scalar variable warning reported by coverity Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 30/33] arm_gic_kvm: Tell kernel about number of IRQs Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 31/33] target-arm/kvm: make reg sync code common between kvm32/64 Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 32/33] target-arm: Support save/load for 64 bit CPUs Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 33/33] target-arm: Check error conditions on kvm_arm_reset_vcpu Peter Maydell
2014-12-11 18:26 ` [Qemu-devel] [PULL 00/33] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1418300395-4348-19-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).