From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 22/33] target-arm: make DFSR banked
Date: Thu, 11 Dec 2014 12:19:44 +0000 [thread overview]
Message-ID: <1418300395-4348-23-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1418300395-4348-1-git-send-email-peter.maydell@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
DFSR has a secure and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-21-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/cpu.h | 10 +++++++++-
target-arm/helper.c | 7 ++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index e8bb057..29870bd 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -251,7 +251,15 @@ typedef struct CPUARMState {
uint64_t ifsr32_el2;
};
};
- uint64_t esr_el[4];
+ union {
+ struct {
+ uint64_t _unused_dfsr;
+ uint64_t dfsr_ns;
+ uint64_t hsr;
+ uint64_t dfsr_s;
+ };
+ uint64_t esr_el[4];
+ };
uint32_t c6_region[8]; /* MPU base/size registers. */
uint64_t far_el[4]; /* Fault address registers. */
uint64_t par_el1; /* Translation result. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index cfb267f..ebb6694 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1651,7 +1651,8 @@ static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
static const ARMCPRegInfo vmsa_cp_reginfo[] = {
{ .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]),
+ .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s),
+ offsetoflow32(CPUARMState, cp15.dfsr_ns) },
.resetfn = arm_cp_reset_ignore, },
{ .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
.access = PL1_RW, .resetvalue = 0,
@@ -4339,11 +4340,11 @@ void arm_cpu_do_interrupt(CPUState *cs)
offset = 4;
break;
case EXCP_DATA_ABORT:
- env->cp15.esr_el[1] = env->exception.fsr;
+ A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr);
env->cp15.far_el[1] = deposit64(env->cp15.far_el[1], 0, 32,
env->exception.vaddress);
qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n",
- (uint32_t)env->cp15.esr_el[1],
+ env->exception.fsr,
(uint32_t)env->exception.vaddress);
new_mode = ARM_CPU_MODE_ABT;
addr = 0x10;
--
1.9.1
next prev parent reply other threads:[~2014-12-11 12:20 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-11 12:19 [Qemu-devel] [PULL 00/33] target-arm queue Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 01/33] Pass semihosting exit code back to system Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 02/33] Add the "-semihosting-config" option Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 03/33] target-arm: extend async excp masking Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 04/33] target-arm: add async excp target_el function Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 05/33] target-arm: add banked register accessors Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 06/33] target-arm: add non-secure Translation Block flag Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 07/33] target-arm: add CPREG secure state support Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 08/33] target-arm: add secure state bit to CPREG hash Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 09/33] target-arm: insert AArch32 cpregs twice into hashtable Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 10/33] target-arm: move AArch32 SCR into security reglist Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 11/33] target-arm: implement IRQ/FIQ routing to Monitor mode Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 12/33] target-arm: add NSACR register Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 13/33] target-arm: add SDER definition Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 14/33] target-arm: add MVBAR support Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 15/33] target-arm: add SCTLR_EL3 and make SCTLR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 16/33] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 17/33] target-arm: make CSSELR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 18/33] target-arm: make TTBR0/1 banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 19/33] target-arm: make TTBCR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 20/33] target-arm: make DACR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 21/33] target-arm: make IFSR banked Peter Maydell
2014-12-11 12:19 ` Peter Maydell [this message]
2014-12-11 12:19 ` [Qemu-devel] [PULL 23/33] target-arm: make IFAR/DFAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 24/33] target-arm: make PAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 25/33] target-arm: make VBAR banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 26/33] target-arm: make c13 cp regs banked (FCSEIDR, ...) Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 27/33] target-arm: make MAIR0/1 banked Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 28/33] hw/arm/realview.c: Fix memory leak in realview_init() Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 29/33] hw/arm/boot: fix uninitialized scalar variable warning reported by coverity Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 30/33] arm_gic_kvm: Tell kernel about number of IRQs Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 31/33] target-arm/kvm: make reg sync code common between kvm32/64 Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 32/33] target-arm: Support save/load for 64 bit CPUs Peter Maydell
2014-12-11 12:19 ` [Qemu-devel] [PULL 33/33] target-arm: Check error conditions on kvm_arm_reset_vcpu Peter Maydell
2014-12-11 18:26 ` [Qemu-devel] [PULL 00/33] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418300395-4348-23-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).