[Qemu-devel] [PATCH v3 2/4] serial: clean up THRE/TEMT handling

[Paolo Bonzini <pbonzini@redhat.com>]

- assert THRE cleared and FIFO not empty (if enabled) before
sending a character.  Also assert TEMT cleared, since it is
the combination of THRE && transmitter shift register empty.

- raise THRI immediately after setting THRE

- check THRE to see if another character has to be sent,
which makes the assertions more obvious and also means TEMT
has to be set as soon as the loop ends

- clear TEMT together with THRE even in the non-FIFO case

There are certainly a couple bugfixes in here, but nothing that
squashes known bugs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/char/serial.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/hw/char/serial.c b/hw/char/serial.c
index 8c42d03..4bce268 100644
--- a/hw/char/serial.c
+++ b/hw/char/serial.c
@@ -224,21 +224,23 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
     SerialState *s = opaque;
 
     do {
+        assert(!(s->lsr & UART_LSR_TEMT));
+        assert(!(s->lsr & UART_LSR_THRE));
+
         if (s->tsr_retry <= 0) {
             if (s->fcr & UART_FCR_FE) {
-                if (fifo8_is_empty(&s->xmit_fifo)) {
-                    return FALSE;
-                }
+                assert(!fifo8_is_empty(&s->xmit_fifo));
                 s->tsr = fifo8_pop(&s->xmit_fifo);
                 if (!s->xmit_fifo.num) {
                     s->lsr |= UART_LSR_THRE;
                 }
-            } else if ((s->lsr & UART_LSR_THRE)) {
-                return FALSE;
             } else {
                 s->tsr = s->thr;
                 s->lsr |= UART_LSR_THRE;
-                s->lsr &= ~UART_LSR_TEMT;
+            }
+            if ((s->lsr & UART_LSR_THRE) && !s->thr_ipending) {
+                s->thr_ipending = 1;
+                serial_update_irq(s);
             }
         }
 
@@ -256,17 +258,13 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
         } else {
             s->tsr_retry = 0;
         }
+
         /* Transmit another byte if it is already available. It is only
            possible when FIFO is enabled and not empty. */
-    } while ((s->fcr & UART_FCR_FE) && !fifo8_is_empty(&s->xmit_fifo));
+    } while (!(s->lsr & UART_LSR_THRE));
 
     s->last_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-
-    if (s->lsr & UART_LSR_THRE) {
-        s->lsr |= UART_LSR_TEMT;
-        s->thr_ipending = 1;
-        serial_update_irq(s);
-    }
+    s->lsr |= UART_LSR_TEMT;
 
     return FALSE;
 }
@@ -323,10 +321,10 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
                     fifo8_pop(&s->xmit_fifo);
                 }
                 fifo8_push(&s->xmit_fifo, s->thr);
-                s->lsr &= ~UART_LSR_TEMT;
             }
             s->thr_ipending = 0;
             s->lsr &= ~UART_LSR_THRE;
+            s->lsr &= ~UART_LSR_TEMT;
             serial_update_irq(s);
             if (s->tsr_retry <= 0) {
                 serial_xmit(NULL, G_IO_OUT, s);
-- 
1.8.3.1