[Qemu-devel] [PATCH v4 0/8] fw_cfg, bootorder, and UEFI+'-kernel' on arm/virt

[Laszlo Ersek <lersek@redhat.com>]

Addressing Peter's review comments for v3.

Patch #2 is new; I thought recognizing & rejecting the overlapping I/O
ports in case the data port was wider than 1 byte merited a separate
patch.

Other changes are noted per-patch.

Rebased the series and ran checkpatch on all patches.

Thanks
Laszlo

Laszlo Ersek (8):
  fw_cfg: max access size and region size are the same for MMIO data reg
  fw_cfg: generalize overlap check for combining control and data I/O
    ports
  fw_cfg: introduce the "data_memwidth" property
  fw_cfg: expose the "data_memwidth" prop with
    fw_cfg_init_data_memwidth()
  arm: add fw_cfg to "virt" board
  hw/loader: split out load_image_gzipped_buffer()
  hw/arm: pass pristine kernel image to guest firmware over fw_cfg
  hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI
    firmware

 include/hw/arm/arm.h      |  5 +++
 include/hw/loader.h       |  9 +++++
 include/hw/nvram/fw_cfg.h |  3 ++
 hw/arm/boot.c             | 91 ++++++++++++++++++++++++++++++++++++++++++++---
 hw/arm/virt.c             | 22 ++++++++++++
 hw/core/loader.c          | 30 +++++++++++-----
 hw/nvram/fw_cfg.c         | 49 ++++++++++++++++++++-----
 7 files changed, 187 insertions(+), 22 deletions(-)

-- 
1.8.3.1