qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: minyard@acm.org
To: qemu-devel@nongnu.org
Cc: Corey Minyard <cminyard@mvista.com>
Subject: [Qemu-devel] [PATCH 11/16] smbios: Add a function to directly add an entry
Date: Fri, 12 Dec 2014 13:15:46 -0600	[thread overview]
Message-ID: <1418411751-3614-12-git-send-email-minyard@acm.org> (raw)
In-Reply-To: <1418411751-3614-1-git-send-email-minyard@acm.org>

From: Corey Minyard <cminyard@mvista.com>

There was no way to directly add a table entry to the SMBIOS table,
even though the BIOS supports this.  So add a function to do this.
This is in preparation for the IPMI handler adding it's SMBIOS table
entry.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
 hw/i386/smbios.c         | 149 ++++++++++++++++++++++++++++++-----------------
 include/hw/i386/smbios.h |  13 +++++
 2 files changed, 110 insertions(+), 52 deletions(-)

diff --git a/hw/i386/smbios.c b/hw/i386/smbios.c
index 024e594..1081d3c 100644
--- a/hw/i386/smbios.c
+++ b/hw/i386/smbios.c
@@ -825,6 +825,25 @@ static void smbios_entry_point_setup(void)
     ep.structure_table_address = cpu_to_le32(0);
 }
 
+struct smbios_device_handler {
+    void (*handle_device_table)(void *opaque);
+    void *opaque;
+    struct smbios_device_handler *prev;
+};
+static struct smbios_device_handler *device_handlers;
+
+void smbios_register_device_table_handler(void (*handle_device_table)
+                                                (void *opaque),
+                                          void *opaque)
+{
+    struct smbios_device_handler *handler = g_malloc(sizeof(*handler));
+
+    handler->handle_device_table = handle_device_table;
+    handler->opaque = opaque;
+    handler->prev = device_handlers;
+    device_handlers = handler;
+}
+
 void smbios_get_tables(uint8_t **tables, size_t *tables_len,
                        uint8_t **anchor, size_t *anchor_len)
 {
@@ -868,6 +887,14 @@ void smbios_get_tables(uint8_t **tables, size_t *tables_len,
         }
 
         smbios_build_type_32_table();
+
+        while (device_handlers) {
+            struct smbios_device_handler *handler = device_handlers;
+            device_handlers = handler->prev;
+            handler->handle_device_table(handler->opaque);
+            g_free(handler);
+        }
+
         smbios_build_type_127_table();
 
         smbios_validate_table();
@@ -891,6 +918,71 @@ static void save_opt(const char **dest, QemuOpts *opts, const char *name)
     }
 }
 
+int smbios_table_entry_add(void *data, int size, bool append_zeros)
+{
+    struct smbios_structure_header *header;
+    struct smbios_table *table; /* legacy mode only */
+
+    /*
+     * NOTE: standard double '\0' terminator expected, per smbios spec.
+     * (except in legacy mode, where the second '\0' is implicit and
+     *  will be inserted by the BIOS).
+     */
+    if (append_zeros) {
+        size += 2;
+    }
+    smbios_tables = g_realloc(smbios_tables, smbios_tables_len + size);
+    header = (struct smbios_structure_header *)(smbios_tables +
+                                                smbios_tables_len);
+
+    memcpy(header, data, size);
+
+    if (test_bit(header->type, have_fields_bitmap)) {
+        error_report("can't load type %d struct, fields already specified!",
+                     header->type);
+        exit(1);
+    }
+    set_bit(header->type, have_binfile_bitmap);
+
+    if (header->type == 4) {
+        smbios_type4_count++;
+    }
+
+    smbios_tables_len += size;
+    if (size > smbios_table_max) {
+        smbios_table_max = size;
+    }
+    smbios_table_cnt++;
+
+    /* add a copy of the newly loaded blob to legacy smbios_entries */
+    /* NOTE: This code runs before smbios_set_defaults(), so we don't
+     *       yet know which mode (legacy vs. aggregate-table) will be
+     *       required. We therefore add the binary blob to both legacy
+     *       (smbios_entries) and aggregate (smbios_tables) tables, and
+     *       delete the one we don't need from smbios_set_defaults(),
+     *       once we know which machine version has been requested.
+     */
+    if (!smbios_entries) {
+        smbios_entries_len = sizeof(uint16_t);
+        smbios_entries = g_malloc0(smbios_entries_len);
+    }
+    if (append_zeros) {
+        size -= 1; /* The BIOS adds the second zero in legacy mode. */
+    }
+    smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
+                               size + sizeof(*table));
+    table = (struct smbios_table *)(smbios_entries + smbios_entries_len);
+    table->header.type = SMBIOS_TABLE_ENTRY;
+    table->header.length = cpu_to_le16(sizeof(*table) + size);
+    memcpy(table->data, header, size);
+    smbios_entries_len += sizeof(*table) + size;
+    (*(uint16_t *)smbios_entries) =
+                cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
+    /* end: add a copy of the newly loaded blob to legacy smbios_entries */
+
+    return 0;
+}
+
 void smbios_entry_add(QemuOpts *opts)
 {
     Error *local_err = NULL;
@@ -900,9 +992,8 @@ void smbios_entry_add(QemuOpts *opts)
 
     val = qemu_opt_get(opts, "file");
     if (val) {
-        struct smbios_structure_header *header;
         int size;
-        struct smbios_table *table; /* legacy mode only */
+        uint8_t *data;
 
         qemu_opts_validate(opts, qemu_smbios_file_opts, &local_err);
         if (local_err) {
@@ -916,60 +1007,14 @@ void smbios_entry_add(QemuOpts *opts)
             exit(1);
         }
 
-        /*
-         * NOTE: standard double '\0' terminator expected, per smbios spec.
-         * (except in legacy mode, where the second '\0' is implicit and
-         *  will be inserted by the BIOS).
-         */
-        smbios_tables = g_realloc(smbios_tables, smbios_tables_len + size);
-        header = (struct smbios_structure_header *)(smbios_tables +
-                                                    smbios_tables_len);
-
-        if (load_image(val, (uint8_t *)header) != size) {
+        data = g_malloc(size);
+        if (load_image(val, data) != size) {
             error_report("Failed to load SMBIOS file %s", val);
             exit(1);
         }
 
-        if (test_bit(header->type, have_fields_bitmap)) {
-            error_report("can't load type %d struct, fields already specified!",
-                         header->type);
-            exit(1);
-        }
-        set_bit(header->type, have_binfile_bitmap);
-
-        if (header->type == 4) {
-            smbios_type4_count++;
-        }
-
-        smbios_tables_len += size;
-        if (size > smbios_table_max) {
-            smbios_table_max = size;
-        }
-        smbios_table_cnt++;
-
-        /* add a copy of the newly loaded blob to legacy smbios_entries */
-        /* NOTE: This code runs before smbios_set_defaults(), so we don't
-         *       yet know which mode (legacy vs. aggregate-table) will be
-         *       required. We therefore add the binary blob to both legacy
-         *       (smbios_entries) and aggregate (smbios_tables) tables, and
-         *       delete the one we don't need from smbios_set_defaults(),
-         *       once we know which machine version has been requested.
-         */
-        if (!smbios_entries) {
-            smbios_entries_len = sizeof(uint16_t);
-            smbios_entries = g_malloc0(smbios_entries_len);
-        }
-        smbios_entries = g_realloc(smbios_entries, smbios_entries_len +
-                                                   size + sizeof(*table));
-        table = (struct smbios_table *)(smbios_entries + smbios_entries_len);
-        table->header.type = SMBIOS_TABLE_ENTRY;
-        table->header.length = cpu_to_le16(sizeof(*table) + size);
-        memcpy(table->data, header, size);
-        smbios_entries_len += sizeof(*table) + size;
-        (*(uint16_t *)smbios_entries) =
-                cpu_to_le16(le16_to_cpu(*(uint16_t *)smbios_entries) + 1);
-        /* end: add a copy of the newly loaded blob to legacy smbios_entries */
-
+        smbios_table_entry_add(data, size, false);
+        g_free(data);
         return;
     }
 
diff --git a/include/hw/i386/smbios.h b/include/hw/i386/smbios.h
index d2850be..656327d 100644
--- a/include/hw/i386/smbios.h
+++ b/include/hw/i386/smbios.h
@@ -27,6 +27,19 @@ void smbios_get_tables(uint8_t **tables, size_t *tables_len,
                        uint8_t **anchor, size_t *anchor_len);
 
 /*
+ * Add an external entry to the SMBIOS table.  Can only be called
+ * from a registered device table handler.
+ */
+int smbios_table_entry_add(void *data, int size, bool append_zeros);
+
+/*
+ * When constructing SMBIOS tables, call a function at the end of the
+ * add process to allow devices to add their own SMBIOS table entries.
+ */
+void smbios_register_device_table_handler(void (*handle_device_table)
+                                                (void *opaque),
+                                          void *opaque);
+/*
  * SMBIOS spec defined tables
  */
 
-- 
1.8.3.1

  parent reply	other threads:[~2014-12-12 19:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-12 19:15 [Qemu-devel] [PATCH 00/16] Add an IPMI device to qemu minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 01/16] Add a base IPMI interface minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 02/16] ipmi: Add a PC ISA type structure minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 03/16] ipmi: Add a KCS low-level interface minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 04/16] ipmi: Add a BT " minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 05/16] ipmi: Add a local BMC simulation minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 06/16] ipmi: Add an external connection simulation interface minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 07/16] ipmi: Add tests minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 08/16] ipmi: Add documentation minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 09/16] ipmi: Add migration capability to the IPMI device minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 10/16] pc: Postpone adding ACPI and SMBIOS to fw_cfg minyard
2014-12-12 19:15 ` minyard [this message]
2014-12-12 19:15 ` [Qemu-devel] [PATCH 12/16] ipmi: Add SMBIOS table entry minyard
2015-02-19  2:53   ` Benjamin Herrenschmidt
2014-12-12 19:15 ` [Qemu-devel] [PATCH 13/16] acpi: Add a way to extend tables minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 14/16] acpi: Add table construction tools minyard
2014-12-12 19:15 ` [Qemu-devel] [PATCH 15/16] ipmi: Add ACPI table entries for BMCs minyard
2015-02-19  2:54   ` Benjamin Herrenschmidt
2015-02-20  3:16     ` Corey Minyard
2015-02-22 20:48       ` Benjamin Herrenschmidt
2014-12-12 19:15 ` [Qemu-devel] [PATCH 16/16] ipmi: Add a thread to better simulate a BMC minyard
2014-12-15 21:11   ` Paolo Bonzini
2014-12-15 21:33     ` Corey Minyard
2014-12-15 21:21 ` [Qemu-devel] [PATCH 00/16] Add an IPMI device to qemu Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1418411751-3614-12-git-send-email-minyard@acm.org \
    --to=minyard@acm.org \
    --cc=cminyard@mvista.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).