From: Max Reitz <mreitz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v5 06/26] qcow2: Use 64 bits for refcount values
Date: Mon, 15 Dec 2014 13:50:37 +0100 [thread overview]
Message-ID: <1418647857-3589-7-git-send-email-mreitz@redhat.com> (raw)
In-Reply-To: <1418647857-3589-1-git-send-email-mreitz@redhat.com>
Refcounts may have a width of up to 64 bits, so qemu should use the same
width to represent refcount values internally.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block/qcow2-cluster.c | 2 +-
block/qcow2-refcount.c | 46 ++++++++++++++++++++++------------------------
block/qcow2.h | 4 ++--
3 files changed, 25 insertions(+), 27 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index b664d2f..a86bb5e 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1640,7 +1640,7 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
for (i = 0; i < l1_size; i++) {
uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK;
bool l2_dirty = false;
- uint16_t l2_refcount;
+ uint64_t l2_refcount;
if (!l2_offset) {
/* unallocated */
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 99a3cce..0308a7e 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -29,7 +29,7 @@
static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size);
static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
- int64_t offset, int64_t length, uint16_t addend,
+ int64_t offset, int64_t length, uint64_t addend,
bool decrease, enum qcow2_discard_type type);
@@ -91,7 +91,7 @@ static int load_refcount_block(BlockDriverState *bs,
* *refcount. Returns 0 on success and -errno on failure.
*/
int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index,
- uint16_t *refcount)
+ uint64_t *refcount)
{
BDRVQcowState *s = bs->opaque;
uint64_t refcount_table_index, block_index;
@@ -535,7 +535,7 @@ found:
static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
int64_t offset,
int64_t length,
- uint16_t addend,
+ uint64_t addend,
bool decrease,
enum qcow2_discard_type type)
{
@@ -547,7 +547,7 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
#ifdef DEBUG_ALLOC2
fprintf(stderr, "update_refcount: offset=%" PRId64 " size=%" PRId64
- " addend=%s%" PRIu16 "\n", offset, length, decrease ? "-" : "",
+ " addend=%s%" PRIu64 "\n", offset, length, decrease ? "-" : "",
addend);
#endif
if (length < 0) {
@@ -567,7 +567,7 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
cluster_offset += s->cluster_size)
{
int block_index;
- uint16_t refcount;
+ uint64_t refcount;
int64_t cluster_index = cluster_offset >> s->cluster_bits;
int64_t table_index = cluster_index >> s->refcount_block_bits;
@@ -594,9 +594,9 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
block_index = cluster_index & (s->refcount_block_size - 1);
refcount = be16_to_cpu(refcount_block[block_index]);
- if (decrease ? ((uint16_t)(refcount - addend) > refcount)
- : ((uint16_t)(refcount + addend) < refcount ||
- (uint16_t)(refcount + addend) > s->refcount_max))
+ if (decrease ? (refcount - addend > refcount)
+ : (refcount + addend < refcount ||
+ refcount + addend > s->refcount_max))
{
ret = -EINVAL;
goto fail;
@@ -656,7 +656,7 @@ fail:
*/
int qcow2_update_cluster_refcount(BlockDriverState *bs,
int64_t cluster_index,
- uint16_t addend, bool decrease,
+ uint64_t addend, bool decrease,
enum qcow2_discard_type type)
{
BDRVQcowState *s = bs->opaque;
@@ -682,8 +682,7 @@ int qcow2_update_cluster_refcount(BlockDriverState *bs,
static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size)
{
BDRVQcowState *s = bs->opaque;
- uint64_t i, nb_clusters;
- uint16_t refcount;
+ uint64_t i, nb_clusters, refcount;
int ret;
nb_clusters = size_to_clusters(s, size);
@@ -741,9 +740,8 @@ int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
int nb_clusters)
{
BDRVQcowState *s = bs->opaque;
- uint64_t cluster_index;
+ uint64_t cluster_index, refcount;
uint64_t i;
- uint16_t refcount;
int ret;
assert(nb_clusters >= 0);
@@ -897,11 +895,10 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
int64_t l1_table_offset, int l1_size, int addend)
{
BDRVQcowState *s = bs->opaque;
- uint64_t *l1_table, *l2_table, l2_offset, offset, l1_size2;
+ uint64_t *l1_table, *l2_table, l2_offset, offset, l1_size2, refcount;
bool l1_allocated = false;
int64_t old_offset, old_l2_offset;
int i, j, l1_modified = 0, nb_csectors;
- uint16_t refcount;
int ret;
l2_table = NULL;
@@ -968,7 +965,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
if (addend != 0) {
ret = update_refcount(bs,
(offset & s->cluster_offset_mask) & ~511,
- nb_csectors * 512, abs(addend), addend < 0,
+ nb_csectors * 512, imaxabs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -999,7 +996,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
}
if (addend != 0) {
ret = qcow2_update_cluster_refcount(bs,
- cluster_index, abs(addend), addend < 0,
+ cluster_index, imaxabs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -1042,7 +1039,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
if (addend != 0) {
ret = qcow2_update_cluster_refcount(bs, l2_offset >>
s->cluster_bits,
- abs(addend), addend < 0,
+ imaxabs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -1368,7 +1365,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
BDRVQcowState *s = bs->opaque;
uint64_t *l2_table = qemu_blockalign(bs, s->cluster_size);
int ret;
- uint16_t refcount;
+ uint64_t refcount;
int i, j;
for (i = 0; i < s->l1_size; i++) {
@@ -1388,7 +1385,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
}
if ((refcount == 1) != ((l1_entry & QCOW_OFLAG_COPIED) != 0)) {
fprintf(stderr, "%s OFLAG_COPIED L2 cluster: l1_index=%d "
- "l1_entry=%" PRIx64 " refcount=%d\n",
+ "l1_entry=%" PRIx64 " refcount=%" PRIu64 "\n",
fix & BDRV_FIX_ERRORS ? "Repairing" :
"ERROR",
i, l1_entry, refcount);
@@ -1432,7 +1429,7 @@ static int check_oflag_copied(BlockDriverState *bs, BdrvCheckResult *res,
}
if ((refcount == 1) != ((l2_entry & QCOW_OFLAG_COPIED) != 0)) {
fprintf(stderr, "%s OFLAG_COPIED data cluster: "
- "l2_entry=%" PRIx64 " refcount=%d\n",
+ "l2_entry=%" PRIx64 " refcount=%" PRIu64 "\n",
fix & BDRV_FIX_ERRORS ? "Repairing" :
"ERROR",
l2_entry, refcount);
@@ -1658,7 +1655,7 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
{
BDRVQcowState *s = bs->opaque;
int64_t i;
- uint16_t refcount1, refcount2;
+ uint64_t refcount1, refcount2;
int ret;
for (i = 0, *highest_cluster = 0; i < nb_clusters; i++) {
@@ -1687,7 +1684,8 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
num_fixed = &res->corruptions_fixed;
}
- fprintf(stderr, "%s cluster %" PRId64 " refcount=%d reference=%d\n",
+ fprintf(stderr, "%s cluster %" PRId64 " refcount=%" PRIu64
+ " reference=%" PRIu64 "\n",
num_fixed != NULL ? "Repairing" :
refcount1 < refcount2 ? "ERROR" :
"Leaked",
@@ -1695,7 +1693,7 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
if (num_fixed) {
ret = update_refcount(bs, i << s->cluster_bits, 1,
- abs(refcount2 - refcount1),
+ imaxabs(refcount2 - refcount1),
refcount1 > refcount2,
QCOW2_DISCARD_ALWAYS);
if (ret >= 0) {
diff --git a/block/qcow2.h b/block/qcow2.h
index 0240ee8..adf515c 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -490,10 +490,10 @@ int qcow2_refcount_init(BlockDriverState *bs);
void qcow2_refcount_close(BlockDriverState *bs);
int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index,
- uint16_t *refcount);
+ uint64_t *refcount);
int qcow2_update_cluster_refcount(BlockDriverState *bs, int64_t cluster_index,
- uint16_t addend, bool decrease,
+ uint64_t addend, bool decrease,
enum qcow2_discard_type type);
int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size);
--
1.9.3
next prev parent reply other threads:[~2014-12-15 12:51 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-15 12:50 [Qemu-devel] [PATCH v5 00/26] qcow2: Support refcount orders != 4 Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 01/26] qcow2: Add two new fields to BDRVQcowState Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 02/26] qcow2: Add refcount_bits to format-specific info Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 03/26] qcow2: Do not return new value after refcount update Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 04/26] qcow2: Only return status from qcow2_get_refcount Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 05/26] qcow2: Use unsigned addend for update_refcount() Max Reitz
2015-01-22 15:33 ` Eric Blake
2014-12-15 12:50 ` Max Reitz [this message]
2015-01-22 15:35 ` [Qemu-devel] [PATCH v5 06/26] qcow2: Use 64 bits for refcount values Eric Blake
2015-02-03 19:26 ` Kevin Wolf
2015-02-03 19:48 ` Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 07/26] qcow2: Respect error in qcow2_alloc_bytes() Max Reitz
2015-02-04 11:40 ` Kevin Wolf
2015-02-04 15:04 ` Max Reitz
2015-02-04 15:12 ` Kevin Wolf
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 08/26] qcow2: Refcount overflow and qcow2_alloc_bytes() Max Reitz
2015-02-04 11:55 ` Kevin Wolf
2015-02-04 15:33 ` Max Reitz
2015-02-04 16:10 ` Kevin Wolf
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 09/26] qcow2: Helper for refcount array reallocation Max Reitz
2015-02-04 13:21 ` Kevin Wolf
2015-02-04 15:57 ` Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 10/26] qcow2: Helper function for refcount modification Max Reitz
2015-02-04 16:06 ` Kevin Wolf
2015-02-04 17:12 ` Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 11/26] qcow2: More helpers " Max Reitz
2015-02-04 13:53 ` Kevin Wolf
2015-02-04 15:59 ` Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 12/26] qcow2: Open images with refcount order != 4 Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 13/26] qcow2: refcount_order parameter for qcow2_create2 Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 14/26] qcow2: Use symbolic macros in qcow2_amend_options Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 15/26] iotests: Prepare for refcount_bits option Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 16/26] qcow2: Allow creation with refcount order != 4 Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 17/26] progress: Allow regressing progress Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 18/26] block: Add opaque value to the amend CB Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 19/26] qcow2: Use error_report() in qcow2_amend_options() Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 20/26] qcow2: Use abort() instead of assert(false) Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 21/26] qcow2: Split upgrade/downgrade paths for amend Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 22/26] qcow2: Use intermediate helper CB " Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 23/26] qcow2: Add function for refcount order amendment Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 24/26] qcow2: Invoke refcount order amendment function Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 25/26] qcow2: Point to amend function in check Max Reitz
2014-12-15 12:50 ` [Qemu-devel] [PATCH v5 26/26] iotests: Add test for different refcount widths Max Reitz
2015-01-20 22:48 ` [Qemu-devel] [PATCH v5 00/26] qcow2: Support refcount orders != 4 Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418647857-3589-7-git-send-email-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).