From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alexander.zuepke@hs-rm.de, rth@twiddle.net
Subject: [Qemu-devel] [PULL 11/13] target-tricore: Add missing 1.6 insn of BOL opcode format
Date: Sun, 21 Dec 2014 18:47:47 +0000 [thread overview]
Message-ID: <1419187669-13576-12-git-send-email-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <1419187669-13576-1-git-send-email-kbastian@mail.uni-paderborn.de>
Some of the 1.6 ISA instructions were still missing. So let's add them.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
target-tricore/translate.c | 49 +++++++++++++++++++++++++++++++++++++++-
target-tricore/tricore-opcodes.h | 6 +++++
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index 1708456..ecb2399 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -3344,8 +3344,49 @@ static void decode_bol_opc(CPUTriCoreState *env, DisasContext *ctx, int32_t op1)
case OPC1_32_BOL_ST_W_LONGOFF:
gen_offset_st(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_LEUL);
break;
+ case OPC1_32_BOL_LD_B_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_SB);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
+ case OPC1_32_BOL_LD_BU_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_UB);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
+ case OPC1_32_BOL_LD_H_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_LESW);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
+ case OPC1_32_BOL_LD_HU_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_LEUW);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
+ case OPC1_32_BOL_ST_B_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_st(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_SB);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
+ case OPC1_32_BOL_ST_H_LONGOFF:
+ if (tricore_feature(env, TRICORE_FEATURE_16)) {
+ gen_offset_ld(ctx, cpu_gpr_d[r1], cpu_gpr_a[r2], address, MO_LESW);
+ } else {
+ /* raise illegal opcode trap */
+ }
+ break;
}
-
}
/* RC format */
@@ -4679,6 +4720,12 @@ static void decode_32Bit_opc(CPUTriCoreState *env, DisasContext *ctx)
case OPC1_32_BOL_LEA_LONGOFF:
case OPC1_32_BOL_ST_W_LONGOFF:
case OPC1_32_BOL_ST_A_LONGOFF:
+ case OPC1_32_BOL_LD_B_LONGOFF:
+ case OPC1_32_BOL_LD_BU_LONGOFF:
+ case OPC1_32_BOL_LD_H_LONGOFF:
+ case OPC1_32_BOL_LD_HU_LONGOFF:
+ case OPC1_32_BOL_ST_B_LONGOFF:
+ case OPC1_32_BOL_ST_H_LONGOFF:
decode_bol_opc(env, ctx, op1);
break;
/* BRC Format */
diff --git a/target-tricore/tricore-opcodes.h b/target-tricore/tricore-opcodes.h
index d66f879..afc2288 100644
--- a/target-tricore/tricore-opcodes.h
+++ b/target-tricore/tricore-opcodes.h
@@ -451,6 +451,12 @@ enum {
OPC1_32_BOL_LEA_LONGOFF = 0xd9,
OPC1_32_BOL_ST_W_LONGOFF = 0x59,
OPC1_32_BOL_ST_A_LONGOFF = 0xb5, /* 1.6 only */
+ OPC1_32_BOL_LD_B_LONGOFF = 0x79, /* 1.6 only */
+ OPC1_32_BOL_LD_BU_LONGOFF = 0x39, /* 1.6 only */
+ OPC1_32_BOL_LD_H_LONGOFF = 0xc9, /* 1.6 only */
+ OPC1_32_BOL_LD_HU_LONGOFF = 0xb9, /* 1.6 only */
+ OPC1_32_BOL_ST_B_LONGOFF = 0xe9, /* 1.6 only */
+ OPC1_32_BOL_ST_H_LONGOFF = 0xf9, /* 1.6 only */
/* BRC Format */
OPCM_32_BRC_EQ_NEQ = 0xdf,
OPCM_32_BRC_GE = 0xff,
--
2.2.1
next prev parent reply other threads:[~2014-12-21 17:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-21 18:47 [Qemu-devel] [PULL 00/13] tricore patches Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 01/13] target-tricore: fix offset masking in BOL format Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 02/13] target-tricore: typo " Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 03/13] target-tricore: add missing 64-bit MOV in RLC format Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 04/13] target-tricore: pretty-print register dump and show more status registers Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 05/13] target-tricore: Fix mask handling JNZ.T being 7 bit long Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 06/13] target-tricore: Change SSOV/SUOV makro name to SSOV32/SUOV32 Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 07/13] target-tricore: Add instructions of RR opcode format, that have 0xb as the first opcode Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 08/13] target-tricore: Add instructions of RR opcode format, that have 0xf " Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 09/13] target-tricore: Add instructions of RR opcode format, that have 0x1 " Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 10/13] target-tricore: Add instructions of RR opcode format, that have 0x4b " Bastian Koppelmann
2014-12-21 18:47 ` Bastian Koppelmann [this message]
2014-12-21 18:47 ` [Qemu-devel] [PULL 12/13] target-tricore: Fix MFCR/MTCR insn and B format offset Bastian Koppelmann
2014-12-21 18:47 ` [Qemu-devel] [PULL 13/13] target-tricore: Add instructions of RR1 opcode format, that have 0xb3 as first opcode Bastian Koppelmann
2014-12-22 14:52 ` [Qemu-devel] [PULL 00/13] tricore patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419187669-13576-12-git-send-email-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=alexander.zuepke@hs-rm.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).