[Qemu-devel] [PATCH v6 00/11] fw_cfg, bootorder, and UEFI+'-kernel' on arm/virt

[Paolo Bonzini <pbonzini@redhat.com>]

The only change from v5 to v6 is that sysbus_mmio_map is moved to
fw_cfg_init_mem.  (And fw_cfg_init1 returns void because it's now
simpler that way).

This causes changes in patches 1, 5 and 6.

I did not have the ARM firmware built, so I tested on PPC to check
for compatibility, and played with "info mtree" and qtest on ARM
(see also commit message for patch 7).

Paolo

Laszlo Ersek (10):
  fw_cfg: hard separation between the MMIO and I/O port mappings
  fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()
  fw_cfg_mem: max access size and region size are the same for data
    register
  fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN
  fw_cfg_mem: introduce the "data_width" property
  fw_cfg_mem: expose the "data_width" property with
    fw_cfg_init_mem_wide()
  arm: add fw_cfg to "virt" board
  hw/loader: split out load_image_gzipped_buffer()
  hw/arm: pass pristine kernel image to guest firmware over fw_cfg
  hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI
    firmware

Paolo Bonzini (1):
  exec: allows 8-byte accesses in subpage_ops

 exec.c                    |  13 ++-
 hw/arm/boot.c             |  88 +++++++++++++++-
 hw/arm/virt.c             |  22 ++++
 hw/core/loader.c          |  30 ++++--
 hw/i386/pc.c              |   4 +-
 hw/nvram/fw_cfg.c         | 250 +++++++++++++++++++++++++++++++++++-----------
 hw/ppc/mac_newworld.c     |   2 +-
 hw/ppc/mac_oldworld.c     |   2 +-
 hw/sparc/sun4m.c          |   2 +-
 hw/sparc64/sun4u.c        |   2 +-
 include/hw/arm/arm.h      |   5 +
 include/hw/loader.h       |   9 ++
 include/hw/nvram/fw_cfg.h |   6 +-
 include/qemu/typedefs.h   |   2 +
 14 files changed, 352 insertions(+), 85 deletions(-)

-- 
2.1.0