From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 27/31] fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide()
Date: Tue, 23 Dec 2014 13:54:23 +0000 [thread overview]
Message-ID: <1419342867-15527-28-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1419342867-15527-1-git-send-email-peter.maydell@linaro.org>
From: Laszlo Ersek <lersek@redhat.com>
We rebase fw_cfg_init_mem() to the new function for compatibility with
current callers.
The behavior of the (big endian) multi-byte data reads is best shown
with a qtest session. Here, we are reading the first six bytes of
the UUID
$ arm-softmmu/qemu-system-arm -M virt -machine accel=qtest \
-qtest stdio -uuid 4600cb32-38ec-4b2f-8acb-81c6ea54f2d8
>>> writew 0x9020008 0x0200
<<< OK
>>> readl 0x9020000
<<< OK 0x000000004600cb32
Remember this is big endian. On big endian machines, it is stored
directly as 0x46 0x00 0xcb 0x32.
On a little endian machine, we have to first swap it, so that it becomes
0x32cb0046. When written to memory, it becomes 0x46 0x00 0xcb 0x32
again.
Reading byte-by-byte works too, of course:
>>> readb 0x9020000
<<< OK 0x0000000000000038
>>> readb 0x9020000
<<< OK 0x00000000000000ec
Here only a single byte is read at a time, so they are read in order
similar to the 1-byte data port that is already in PPC and SPARC
machines.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-8-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/nvram/fw_cfg.c | 12 +++++++++---
include/hw/nvram/fw_cfg.h | 2 ++
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 2950d68..fcdf821 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -663,14 +663,14 @@ FWCfgState *fw_cfg_init_io(uint32_t iobase)
return FW_CFG(dev);
}
-FWCfgState *fw_cfg_init_mem(hwaddr ctl_addr, hwaddr data_addr)
+FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr, hwaddr data_addr,
+ uint32_t data_width)
{
DeviceState *dev;
SysBusDevice *sbd;
dev = qdev_create(NULL, TYPE_FW_CFG_MEM);
- qdev_prop_set_uint32(dev, "data_width",
- fw_cfg_data_mem_ops.valid.max_access_size);
+ qdev_prop_set_uint32(dev, "data_width", data_width);
fw_cfg_init1(dev);
@@ -681,6 +681,12 @@ FWCfgState *fw_cfg_init_mem(hwaddr ctl_addr, hwaddr data_addr)
return FW_CFG(dev);
}
+FWCfgState *fw_cfg_init_mem(hwaddr ctl_addr, hwaddr data_addr)
+{
+ return fw_cfg_init_mem_wide(ctl_addr, data_addr,
+ fw_cfg_data_mem_ops.valid.max_access_size);
+}
+
FWCfgState *fw_cfg_find(void)
{
diff --git a/include/hw/nvram/fw_cfg.h b/include/hw/nvram/fw_cfg.h
index a99586e..6d8a8ac 100644
--- a/include/hw/nvram/fw_cfg.h
+++ b/include/hw/nvram/fw_cfg.h
@@ -80,6 +80,8 @@ void *fw_cfg_modify_file(FWCfgState *s, const char *filename, void *data,
size_t len);
FWCfgState *fw_cfg_init_io(uint32_t iobase);
FWCfgState *fw_cfg_init_mem(hwaddr ctl_addr, hwaddr data_addr);
+FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr, hwaddr data_addr,
+ uint32_t data_width);
FWCfgState *fw_cfg_find(void);
--
1.9.1
next prev parent reply other threads:[~2014-12-23 13:54 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 13:53 [Qemu-devel] [PULL 00/31] target-arm queue Peter Maydell
2014-12-23 13:53 ` [Qemu-devel] [PULL 01/31] audio: Don't free hw resources until after hw backend is stopped Peter Maydell
2014-12-23 13:53 ` [Qemu-devel] [PULL 02/31] target-arm: Merge EL3 CP15 register lists Peter Maydell
2014-12-23 13:53 ` [Qemu-devel] [PULL 03/31] machine: remove qemu_machine_opts global list Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 04/31] vl.c: simplified machine_set_property Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 05/31] vl.c: add HMP help to machine Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 06/31] target-arm: Add vexpress class and machine types Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 07/31] target-arm: Add vexpress a9 & a15 machine objects Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 08/31] target-arm: Switch to common vexpress machine init Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 09/31] target-arm: Add vexpress machine secure property Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 10/31] target-arm: Change vexpress daughterboard init arg Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 11/31] target-arm: Add virt class and machine types Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 12/31] target-arm: Add virt machine secure property Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 13/31] target-arm: Add feature unset function Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 14/31] target-arm: Add ARMCPU secure property Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 15/31] target-arm: Add arm_boot_info secure_boot control Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 16/31] target-arm: Enable CPU has_el3 prop during VE init Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 17/31] target-arm: Set CPU has_el3 prop during virt init Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 18/31] target-arm: Breakout integratorcp and versatilepb cpu init Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 19/31] target-arm: Disable EL3 on unsupported machines Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 20/31] target-arm: add cpu feature EL3 to CPUs with Security Extensions Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 21/31] fw_cfg: hard separation between the MMIO and I/O port mappings Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 22/31] fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem() Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 23/31] fw_cfg_mem: max access size and region size are the same for data register Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 24/31] fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 25/31] exec: allows 8-byte accesses in subpage_ops Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 26/31] fw_cfg_mem: introduce the "data_width" property Peter Maydell
2014-12-23 13:54 ` Peter Maydell [this message]
2014-12-23 13:54 ` [Qemu-devel] [PULL 28/31] arm: add fw_cfg to "virt" board Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 29/31] hw/loader: split out load_image_gzipped_buffer() Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 30/31] hw/arm: pass pristine kernel image to guest firmware over fw_cfg Peter Maydell
2014-12-23 13:54 ` [Qemu-devel] [PULL 31/31] hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware Peter Maydell
2014-12-23 17:46 ` [Qemu-devel] [PULL 00/31] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419342867-15527-28-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).