[Qemu-devel] [PATCH v3 8/9] rocker: add tests

qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed

From: sfeldma@gmail.com
To: qemu-devel@nongnu.org, jiri@resnulli.us,
	roopa@cumulusnetworks.com, john.fastabend@gmail.com,
	eblake@redhat.com, pbonzini@redhat.com, stefanha@gmail.com
Subject: [Qemu-devel] [PATCH v3 8/9] rocker: add tests
Date: Sat, 10 Jan 2015 19:57:51 -0800	[thread overview]
Message-ID: <1420948672-50103-9-git-send-email-sfeldma@gmail.com> (raw)
In-Reply-To: <1420948672-50103-1-git-send-email-sfeldma@gmail.com>

From: Scott Feldman <sfeldma@gmail.com>

Add some basic test for rocker to test L2/L3/L4 functionality.  Requires an
external test environment, simp, located here:

https://github.com/scottfeldman/simp

To run tests, simp environment must be installed and a suitable VM image built
and installed with a Linux 3.18 (or greater) kernel with rocker driver support
enabled.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
---
 hw/net/rocker/test/README          |    5 +++
 hw/net/rocker/test/all             |   19 +++++++++++
 hw/net/rocker/test/bridge          |   43 ++++++++++++++++++++++++
 hw/net/rocker/test/bridge-stp      |   52 +++++++++++++++++++++++++++++
 hw/net/rocker/test/bridge-vlan     |   52 +++++++++++++++++++++++++++++
 hw/net/rocker/test/bridge-vlan-stp |   64 ++++++++++++++++++++++++++++++++++++
 hw/net/rocker/test/port            |   22 +++++++++++++
 hw/net/rocker/test/tut.dot         |    8 +++++
 8 files changed, 265 insertions(+)
 create mode 100644 hw/net/rocker/test/README
 create mode 100755 hw/net/rocker/test/all
 create mode 100755 hw/net/rocker/test/bridge
 create mode 100755 hw/net/rocker/test/bridge-stp
 create mode 100755 hw/net/rocker/test/bridge-vlan
 create mode 100755 hw/net/rocker/test/bridge-vlan-stp
 create mode 100755 hw/net/rocker/test/port
 create mode 100644 hw/net/rocker/test/tut.dot

diff --git a/hw/net/rocker/test/README b/hw/net/rocker/test/README
new file mode 100644
index 0000000..531e673
--- /dev/null
+++ b/hw/net/rocker/test/README
@@ -0,0 +1,5 @@
+Tests require simp (simple network simulator) found here:
+
+https://github.com/scottfeldman/simp
+
+Run 'all' to run all tests.
diff --git a/hw/net/rocker/test/all b/hw/net/rocker/test/all
new file mode 100755
index 0000000..d5ae963
--- /dev/null
+++ b/hw/net/rocker/test/all
@@ -0,0 +1,19 @@
+echo -n "Running port test...              "
+./port
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge test...            "
+./bridge
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge STP test...        "
+./bridge-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN test...       "
+./bridge-vlan
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
+
+echo -n "Running bridge VLAN STP test...   "
+./bridge-vlan-stp
+if [ $? -eq 0 ]; then echo "pass"; else echo "FAILED"; exit 1; fi
diff --git a/hw/net/rocker/test/bridge b/hw/net/rocker/test/bridge
new file mode 100755
index 0000000..f1f555a
--- /dev/null
+++ b/hw/net/rocker/test/bridge
@@ -0,0 +1,43 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+simp ssh tut sw1 --cmd "sudo ifconfig br0 11.0.0.3/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+if [ $? -ne 0 ]; then exit 1; fi
+simp ssh tut h1 --cmd "ping -c10 11.0.0.3 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-stp b/hw/net/rocker/test/bridge-stp
new file mode 100755
index 0000000..60f4483
--- /dev/null
+++ b/hw/net/rocker/test/bridge-stp
@@ -0,0 +1,52 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-vlan b/hw/net/rocker/test/bridge-vlan
new file mode 100755
index 0000000..faef827
--- /dev/null
+++ b/hw/net/rocker/test/bridge-vlan
@@ -0,0 +1,52 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/bridge-vlan-stp b/hw/net/rocker/test/bridge-vlan-stp
new file mode 100755
index 0000000..2e4e334
--- /dev/null
+++ b/hw/net/rocker/test/bridge-vlan-stp
@@ -0,0 +1,64 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+sleep 10
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# configure a 2-port bridge
+
+simp ssh tut sw1 --cmd "sudo /sbin/ip link add name br0 type bridge"
+simp ssh tut sw1 --cmd "sudo brctl stp br0 on"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp1 master br0"
+simp ssh tut sw1 --cmd "sudo /sbin/ip link set dev swp2 master br0"
+
+# turn off vlan default_pvid on br0
+# turn on vlan filtering on br0
+
+simp ssh tut sw1 --cmd "echo 0 | sudo dd of=/sys/class/net/br0/bridge/default_pvid 2> /dev/null"
+simp ssh tut sw1 --cmd "echo 1 | sudo dd of=/sys/class/net/br0/bridge/vlan_filtering 2> /dev/null"
+
+# add both ports to VLAN 57
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp1 master"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge vlan add vid 57 dev swp2 master"
+
+# turn off learning and flooding in SW
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 learning off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 learning off"
+
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp1 flood off"
+simp ssh tut sw1 --cmd "sudo /sbin/bridge link set dev swp2 flood off"
+
+# config IP on host VLANs
+
+simp ssh tut h1 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h1 --cmd "sudo ifconfig swp1.57 11.0.0.1/24"
+
+simp ssh tut h2 --cmd "sudo vconfig add swp1 57 >/dev/null 2>&1"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 up"
+simp ssh tut h2 --cmd "sudo ifconfig swp1.57 11.0.0.2/24"
+
+# bring up bridge and ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig br0 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 up"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 up"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -w 1 -c1 11.0.0.2 >/dev/null"
+if [ $? -eq 0 ]; then exit 1; fi
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
+sleep 10
+simp ssh tut h1 --cmd "ping -c10 11.0.0.2 >/dev/null"
diff --git a/hw/net/rocker/test/port b/hw/net/rocker/test/port
new file mode 100755
index 0000000..3437f7d
--- /dev/null
+++ b/hw/net/rocker/test/port
@@ -0,0 +1,22 @@
+simp destroy ".*"
+simp create -o sw1:rocker:sw1 tut tut.dot
+simp start tut
+while ! simp ssh tut sw1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h1 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+while ! simp ssh tut h2 --cmd "ping -c 1 localhost >/dev/null"; do sleep 1; done
+
+# bring up DUT ports
+
+simp ssh tut sw1 --cmd "sudo ifconfig swp1 11.0.0.1/24"
+simp ssh tut sw1 --cmd "sudo ifconfig swp2 12.0.0.1/24"
+
+# config IP on hosts
+
+simp ssh tut h1 --cmd "sudo ifconfig swp1 11.0.0.2/24"
+simp ssh tut h2 --cmd "sudo ifconfig swp1 12.0.0.2/24"
+
+# test...
+
+simp ssh tut h1 --cmd "ping -c10 11.0.0.1 >/dev/null"
+if [ $? -eq 1 ]; then exit 1; fi
+simp ssh tut h2 --cmd "ping -c10 12.0.0.1 >/dev/null"
diff --git a/hw/net/rocker/test/tut.dot b/hw/net/rocker/test/tut.dot
new file mode 100644
index 0000000..87f7266
--- /dev/null
+++ b/hw/net/rocker/test/tut.dot
@@ -0,0 +1,8 @@
+graph G {
+	graph [hostidtype="hostname", version="1:0", date="04/12/2013"];
+	edge [dir=none, notify="log"];
+	sw1:swp1 -- h1:swp1;
+	sw1:swp2 -- h2:swp1;
+	sw1:swp3 -- h3:swp1;
+	sw1:swp4 -- h4:swp1;
+}
-- 
1.7.10.4

next prev parent reply	other threads:[~2015-01-11  3:57 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-11  3:57 [Qemu-devel] [PATCH v3 0/9] rocker: add new rocker ethernet switch device sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 1/9] net: add MAC address string printer sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 2/9] virtio-net: use qemu_mac_strdup_printf sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 3/9] rocker: add register programming guide sfeldma
2015-01-12 11:40   ` Paolo Bonzini
2015-01-16  8:14     ` Scott Feldman
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 4/9] pci: add rocker device ID sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 5/9] pci: add network device class 'other' for network switches sfeldma
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 6/9] rocker: add new rocker switch device sfeldma
2015-01-12 12:57   ` Paolo Bonzini
2015-01-14 23:20     ` Scott Feldman
2015-01-15  9:08       ` Paolo Bonzini
2015-01-16  9:15   ` Jason Wang
2015-01-16  9:48     ` Scott Feldman
2015-01-21  3:36       ` Jason Wang
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 7/9] qmp: add rocker device support sfeldma
2015-01-16  9:26   ` Jason Wang
2015-01-16  9:59     ` Scott Feldman
2015-01-11  3:57 ` sfeldma [this message]
2015-01-11  3:57 ` [Qemu-devel] [PATCH v3 9/9] MAINTAINERS: add rocker sfeldma

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:531e673 dfblob:d5ae963 dfblob:f1f555a dfblob:60f4483
dfblob:faef827 dfblob:2e4e334 dfblob:3437f7d dfblob:87f7266 )
 OR (
bs:"[Qemu-devel] [PATCH v3 8/9] rocker: add tests" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420948672-50103-9-git-send-email-sfeldma@gmail.com \
    --to=sfeldma@gmail.com \
    --cc=eblake@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=john.fastabend@gmail.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=roopa@cumulusnetworks.com \
    --cc=stefanha@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).