From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, John Snow <jsnow@redhat.com>,
armbru@redhat.com, mreitz@redhat.com, vsementsov@parallels.com,
stefanha@redhat.com
Subject: [Qemu-devel] [PATCH v11 10/13] qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}
Date: Mon, 12 Jan 2015 11:31:02 -0500 [thread overview]
Message-ID: <1421080265-2228-11-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1421080265-2228-1-git-send-email-jsnow@redhat.com>
From: Fam Zheng <famz@redhat.com>
This adds three qmp commands to transactions.
Users can stop a dirty bitmap, start backup of it, and start another
dirty bitmap atomically, so that the dirty bitmap is tracked
incrementally and we don't miss any write.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
blockdev.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
qapi-schema.json | 5 ++-
2 files changed, 109 insertions(+), 1 deletion(-)
diff --git a/blockdev.c b/blockdev.c
index 114a94c..e283581 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1602,6 +1602,94 @@ static void drive_backup_clean(BlkTransactionState *common)
}
}
+static void block_dirty_bitmap_add_prepare(BlkTransactionState *common,
+ Error **errp)
+{
+ BlockDirtyBitmapAdd *action;
+
+ action = common->action->block_dirty_bitmap_add;
+ qmp_block_dirty_bitmap_add(action->node_ref, action->name,
+ action->has_granularity, action->granularity,
+ errp);
+}
+
+static void block_dirty_bitmap_add_abort(BlkTransactionState *common)
+{
+ BlockDirtyBitmapAdd *action;
+
+ action = common->action->block_dirty_bitmap_add;
+ /* Should not fail meaningfully: IF the bitmap was added via .prepare(),
+ * then the node reference and bitmap name must have been valid.
+ * THUS: any failure here could only indicate the lack of a bitmap at all.
+ */
+ qmp_block_dirty_bitmap_remove(action->node_ref, action->name, NULL);
+}
+
+typedef struct BlockDirtyBitmapState {
+ BlkTransactionState common;
+ BdrvDirtyBitmap *bitmap;
+ AioContext *aio_context;
+} BlockDirtyBitmapState;
+
+/**
+ * Enable and Disable re-use the same preparation.
+ */
+static void block_dirty_bitmap_toggle_prepare(BlkTransactionState *common,
+ Error **errp)
+{
+ BlockDirtyBitmapState *state = DO_UPCAST(BlockDirtyBitmapState,
+ common, common);
+ BlockDirtyBitmap *action;
+ BlockDriverState *bs;
+
+ /* We may be used by either enable or disable;
+ * We use the "enable" member of the union here,
+ * but "disable" should be functionally equivalent: */
+ action = common->action->block_dirty_bitmap_enable;
+ assert(action == common->action->block_dirty_bitmap_disable);
+
+ state->bitmap = block_dirty_bitmap_lookup(action->node_ref,
+ action->name,
+ &bs,
+ errp);
+ if (!state->bitmap) {
+ return;
+ }
+
+ if (bdrv_dirty_bitmap_frozen(state->bitmap)) {
+ error_setg(errp, "Cannot enable/disable a bitmap that is frozen.\n");
+ return;
+ }
+
+ /* AioContext is released in .clean() */
+ state->aio_context = bdrv_get_aio_context(bs);
+ aio_context_acquire(state->aio_context);
+}
+
+static void block_dirty_bitmap_enable_commit(BlkTransactionState *common)
+{
+ BlockDirtyBitmapState *state = DO_UPCAST(BlockDirtyBitmapState,
+ common, common);
+ bdrv_enable_dirty_bitmap(state->bitmap);
+}
+
+static void block_dirty_bitmap_disable_commit(BlkTransactionState *common)
+{
+ BlockDirtyBitmapState *state = DO_UPCAST(BlockDirtyBitmapState,
+ common, common);
+ bdrv_disable_dirty_bitmap(state->bitmap);
+}
+
+static void block_dirty_bitmap_toggle_clean(BlkTransactionState *common)
+{
+ BlockDirtyBitmapState *state = DO_UPCAST(BlockDirtyBitmapState,
+ common, common);
+
+ if (state->aio_context) {
+ aio_context_release(state->aio_context);
+ }
+}
+
static void abort_prepare(BlkTransactionState *common, Error **errp)
{
error_setg(errp, "Transaction aborted using Abort action");
@@ -1636,6 +1724,23 @@ static const BdrvActionOps actions[] = {
.abort = internal_snapshot_abort,
.clean = internal_snapshot_clean,
},
+ [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_ADD] = {
+ .instance_size = sizeof(BlkTransactionState),
+ .prepare = block_dirty_bitmap_add_prepare,
+ .abort = block_dirty_bitmap_add_abort,
+ },
+ [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_ENABLE] = {
+ .instance_size = sizeof(BlockDirtyBitmapState),
+ .prepare = block_dirty_bitmap_toggle_prepare,
+ .commit = block_dirty_bitmap_enable_commit,
+ .clean = block_dirty_bitmap_toggle_clean,
+ },
+ [TRANSACTION_ACTION_KIND_BLOCK_DIRTY_BITMAP_DISABLE] = {
+ .instance_size = sizeof(BlockDirtyBitmapState),
+ .prepare = block_dirty_bitmap_toggle_prepare,
+ .commit = block_dirty_bitmap_disable_commit,
+ .clean = block_dirty_bitmap_toggle_clean,
+ },
};
/*
diff --git a/qapi-schema.json b/qapi-schema.json
index 563b4ad..85f55d9 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1260,7 +1260,10 @@
'blockdev-snapshot-sync': 'BlockdevSnapshot',
'drive-backup': 'DriveBackup',
'abort': 'Abort',
- 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal'
+ 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal',
+ 'block-dirty-bitmap-add': 'BlockDirtyBitmapAdd',
+ 'block-dirty-bitmap-enable': 'BlockDirtyBitmap',
+ 'block-dirty-bitmap-disable': 'BlockDirtyBitmap'
} }
##
--
1.9.3
next prev parent reply other threads:[~2015-01-12 16:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 16:30 [Qemu-devel] [PATCH v11 00/13] block: Incremental backup series John Snow
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 01/13] block: fix spoiling all dirty bitmaps by mirror and migration John Snow
2015-01-13 15:54 ` Vladimir Sementsov-Ogievskiy
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 02/13] qapi: Add optional field "name" to block dirty bitmap John Snow
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 03/13] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove John Snow
2015-01-16 15:36 ` Max Reitz
2015-01-16 16:48 ` John Snow
2015-01-16 16:51 ` Max Reitz
2015-01-16 16:54 ` John Snow
2015-01-19 10:08 ` Markus Armbruster
2015-01-19 21:05 ` John Snow
2015-01-20 8:26 ` Markus Armbruster
2015-01-20 16:48 ` John Snow
2015-01-21 9:34 ` Markus Armbruster
2015-01-21 15:51 ` Eric Blake
2015-01-30 14:32 ` Kevin Wolf
2015-01-30 17:04 ` John Snow
2015-01-30 18:52 ` Kevin Wolf
2015-02-02 10:10 ` Markus Armbruster
2015-02-02 21:40 ` John Snow
2015-01-29 13:55 ` Vladimir Sementsov-Ogievskiy
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 04/13] block: Introduce bdrv_dirty_bitmap_granularity() John Snow
2015-01-16 15:40 ` Max Reitz
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 05/13] block: Add bdrv_clear_dirty_bitmap John Snow
2015-01-16 15:56 ` Max Reitz
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 06/13] hbitmap: add hbitmap_merge John Snow
2015-01-16 16:12 ` Max Reitz
2015-01-12 16:30 ` [Qemu-devel] [PATCH v11 07/13] qmp: Add block-dirty-bitmap-enable and block-dirty-bitmap-disable John Snow
2015-01-16 16:28 ` Max Reitz
2015-01-16 17:09 ` John Snow
2015-01-12 16:31 ` [Qemu-devel] [PATCH v11 08/13] block: Add bitmap successors John Snow
2015-01-13 9:24 ` Fam Zheng
2015-01-13 17:26 ` John Snow
2015-01-16 18:22 ` John Snow
2015-01-19 1:00 ` Fam Zheng
2015-01-12 16:31 ` [Qemu-devel] [PATCH v11 09/13] qmp: Add support of "dirty-bitmap" sync mode for drive-backup John Snow
2015-01-13 9:37 ` Fam Zheng
2015-01-13 17:50 ` John Snow
2015-01-14 6:29 ` Fam Zheng
2015-01-16 17:52 ` Max Reitz
2015-01-16 17:59 ` John Snow
2015-01-12 16:31 ` John Snow [this message]
2015-01-12 16:31 ` [Qemu-devel] [PATCH v11 11/13] qmp: Add dirty bitmap status fields in query-block John Snow
2015-01-12 16:31 ` [Qemu-devel] [PATCH v11 12/13] qemu-iotests: Add tests for drive-backup sync=dirty-bitmap John Snow
2015-02-06 14:23 ` Vladimir Sementsov-Ogievskiy
2015-02-06 17:14 ` John Snow
2015-01-12 16:31 ` [Qemu-devel] [PATCH v11 13/13] block: BdrvDirtyBitmap miscellaneous fixup John Snow
2015-01-13 16:50 ` Vladimir Sementsov-Ogievskiy
2015-01-13 18:27 ` John Snow
2015-01-13 1:21 ` [Qemu-devel] [PATCH v11 00/13] block: Incremental backup series Fam Zheng
2015-01-13 19:52 ` John Snow
2015-01-29 22:38 ` John Snow
2015-01-30 10:24 ` Vladimir Sementsov-Ogievskiy
2015-01-30 18:46 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421080265-2228-11-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=armbru@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).