From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Marc Marí" <marc.mari.barcelo@gmail.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Stefan Hajnoczi" <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL v2 23/44] libqos: Remove PCI assumptions in constants of virtio driver
Date: Mon, 12 Jan 2015 16:40:13 +0000 [thread overview]
Message-ID: <1421080834-14724-24-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1421080834-14724-1-git-send-email-stefanha@redhat.com>
From: Marc Marí <marc.mari.barcelo@gmail.com>
Convert PCI-specific constants names of libqos virtio driver.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
tests/libqos/virtio-pci.c | 30 +++++++++++++++---------------
tests/libqos/virtio-pci.h | 24 ++++++++++++------------
tests/virtio-blk-test.c | 11 ++++++-----
3 files changed, 33 insertions(+), 32 deletions(-)
diff --git a/tests/libqos/virtio-pci.c b/tests/libqos/virtio-pci.c
index 92bcac1..046a316 100644
--- a/tests/libqos/virtio-pci.c
+++ b/tests/libqos/virtio-pci.c
@@ -102,31 +102,31 @@ static uint64_t qvirtio_pci_config_readq(QVirtioDevice *d, uint64_t addr)
static uint32_t qvirtio_pci_get_features(QVirtioDevice *d)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- return qpci_io_readl(dev->pdev, dev->addr + QVIRTIO_DEVICE_FEATURES);
+ return qpci_io_readl(dev->pdev, dev->addr + QVIRTIO_PCI_DEVICE_FEATURES);
}
static void qvirtio_pci_set_features(QVirtioDevice *d, uint32_t features)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- qpci_io_writel(dev->pdev, dev->addr + QVIRTIO_GUEST_FEATURES, features);
+ qpci_io_writel(dev->pdev, dev->addr + QVIRTIO_PCI_GUEST_FEATURES, features);
}
static uint32_t qvirtio_pci_get_guest_features(QVirtioDevice *d)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- return qpci_io_readl(dev->pdev, dev->addr + QVIRTIO_GUEST_FEATURES);
+ return qpci_io_readl(dev->pdev, dev->addr + QVIRTIO_PCI_GUEST_FEATURES);
}
static uint8_t qvirtio_pci_get_status(QVirtioDevice *d)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_DEVICE_STATUS);
+ return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_PCI_DEVICE_STATUS);
}
static void qvirtio_pci_set_status(QVirtioDevice *d, uint8_t status)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- qpci_io_writeb(dev->pdev, dev->addr + QVIRTIO_DEVICE_STATUS, status);
+ qpci_io_writeb(dev->pdev, dev->addr + QVIRTIO_PCI_DEVICE_STATUS, status);
}
static bool qvirtio_pci_get_queue_isr_status(QVirtioDevice *d, QVirtQueue *vq)
@@ -146,7 +146,7 @@ static bool qvirtio_pci_get_queue_isr_status(QVirtioDevice *d, QVirtQueue *vq)
return data == vqpci->msix_data;
}
} else {
- return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_ISR_STATUS) & 1;
+ return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_PCI_ISR_STATUS) & 1;
}
}
@@ -166,26 +166,26 @@ static bool qvirtio_pci_get_config_isr_status(QVirtioDevice *d)
return data == dev->config_msix_data;
}
} else {
- return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_ISR_STATUS) & 2;
+ return qpci_io_readb(dev->pdev, dev->addr + QVIRTIO_PCI_ISR_STATUS) & 2;
}
}
static void qvirtio_pci_queue_select(QVirtioDevice *d, uint16_t index)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- qpci_io_writeb(dev->pdev, dev->addr + QVIRTIO_QUEUE_SELECT, index);
+ qpci_io_writeb(dev->pdev, dev->addr + QVIRTIO_PCI_QUEUE_SELECT, index);
}
static uint16_t qvirtio_pci_get_queue_size(QVirtioDevice *d)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- return qpci_io_readw(dev->pdev, dev->addr + QVIRTIO_QUEUE_SIZE);
+ return qpci_io_readw(dev->pdev, dev->addr + QVIRTIO_PCI_QUEUE_SIZE);
}
static void qvirtio_pci_set_queue_address(QVirtioDevice *d, uint32_t pfn)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- qpci_io_writel(dev->pdev, dev->addr + QVIRTIO_QUEUE_ADDRESS, pfn);
+ qpci_io_writel(dev->pdev, dev->addr + QVIRTIO_PCI_QUEUE_ADDRESS, pfn);
}
static QVirtQueue *qvirtio_pci_virtqueue_setup(QVirtioDevice *d,
@@ -227,7 +227,7 @@ static QVirtQueue *qvirtio_pci_virtqueue_setup(QVirtioDevice *d,
static void qvirtio_pci_virtqueue_kick(QVirtioDevice *d, QVirtQueue *vq)
{
QVirtioPCIDevice *dev = (QVirtioPCIDevice *)d;
- qpci_io_writew(dev->pdev, dev->addr + QVIRTIO_QUEUE_NOTIFY, vq->index);
+ qpci_io_writew(dev->pdev, dev->addr + QVIRTIO_PCI_QUEUE_NOTIFY, vq->index);
}
const QVirtioBus qvirtio_pci = {
@@ -307,8 +307,8 @@ void qvirtqueue_pci_msix_setup(QVirtioPCIDevice *d, QVirtQueuePCI *vqpci,
control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT);
qvirtio_pci_queue_select(&d->vdev, vqpci->vq.index);
- qpci_io_writew(d->pdev, d->addr + QVIRTIO_MSIX_QUEUE_VECTOR, entry);
- vector = qpci_io_readw(d->pdev, d->addr + QVIRTIO_MSIX_QUEUE_VECTOR);
+ qpci_io_writew(d->pdev, d->addr + QVIRTIO_PCI_MSIX_QUEUE_VECTOR, entry);
+ vector = qpci_io_readw(d->pdev, d->addr + QVIRTIO_PCI_MSIX_QUEUE_VECTOR);
g_assert_cmphex(vector, !=, QVIRTIO_MSI_NO_VECTOR);
}
@@ -339,7 +339,7 @@ void qvirtio_pci_set_msix_configuration_vector(QVirtioPCIDevice *d,
qpci_io_writel(d->pdev, addr + PCI_MSIX_ENTRY_VECTOR_CTRL,
control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT);
- qpci_io_writew(d->pdev, d->addr + QVIRTIO_MSIX_CONF_VECTOR, entry);
- vector = qpci_io_readw(d->pdev, d->addr + QVIRTIO_MSIX_CONF_VECTOR);
+ qpci_io_writew(d->pdev, d->addr + QVIRTIO_PCI_MSIX_CONF_VECTOR, entry);
+ vector = qpci_io_readw(d->pdev, d->addr + QVIRTIO_PCI_MSIX_CONF_VECTOR);
g_assert_cmphex(vector, !=, QVIRTIO_MSI_NO_VECTOR);
}
diff --git a/tests/libqos/virtio-pci.h b/tests/libqos/virtio-pci.h
index 883f7ff..8f0e52a 100644
--- a/tests/libqos/virtio-pci.h
+++ b/tests/libqos/virtio-pci.h
@@ -13,18 +13,18 @@
#include "libqos/virtio.h"
#include "libqos/pci.h"
-#define QVIRTIO_DEVICE_FEATURES 0x00
-#define QVIRTIO_GUEST_FEATURES 0x04
-#define QVIRTIO_QUEUE_ADDRESS 0x08
-#define QVIRTIO_QUEUE_SIZE 0x0C
-#define QVIRTIO_QUEUE_SELECT 0x0E
-#define QVIRTIO_QUEUE_NOTIFY 0x10
-#define QVIRTIO_DEVICE_STATUS 0x12
-#define QVIRTIO_ISR_STATUS 0x13
-#define QVIRTIO_MSIX_CONF_VECTOR 0x14
-#define QVIRTIO_MSIX_QUEUE_VECTOR 0x16
-#define QVIRTIO_DEVICE_SPECIFIC_MSIX 0x18
-#define QVIRTIO_DEVICE_SPECIFIC_NO_MSIX 0x14
+#define QVIRTIO_PCI_DEVICE_FEATURES 0x00
+#define QVIRTIO_PCI_GUEST_FEATURES 0x04
+#define QVIRTIO_PCI_QUEUE_ADDRESS 0x08
+#define QVIRTIO_PCI_QUEUE_SIZE 0x0C
+#define QVIRTIO_PCI_QUEUE_SELECT 0x0E
+#define QVIRTIO_PCI_QUEUE_NOTIFY 0x10
+#define QVIRTIO_PCI_DEVICE_STATUS 0x12
+#define QVIRTIO_PCI_ISR_STATUS 0x13
+#define QVIRTIO_PCI_MSIX_CONF_VECTOR 0x14
+#define QVIRTIO_PCI_MSIX_QUEUE_VECTOR 0x16
+#define QVIRTIO_PCI_DEVICE_SPECIFIC_MSIX 0x18
+#define QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX 0x14
#define QVIRTIO_PCI_ALIGN 4096
diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index c48c058..fd54f58 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -157,6 +157,7 @@ static void test_basic(const QVirtioBus *bus, QVirtioDevice *dev,
char *data;
capacity = qvirtio_config_readq(bus, dev, device_specific);
+
g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
features = qvirtio_get_features(bus, dev);
@@ -283,7 +284,7 @@ static void pci_basic(void)
alloc, 0);
/* MSI-X is not enabled */
- addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
+ addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX;
test_basic(&qvirtio_pci, &dev->vdev, alloc, &vqpci->vq,
(uint64_t)(uintptr_t)addr);
@@ -318,7 +319,7 @@ static void pci_indirect(void)
dev = virtio_blk_pci_init(bus, PCI_SLOT);
/* MSI-X is not enabled */
- addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
+ addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX;
capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev,
(uint64_t)(uintptr_t)addr);
@@ -412,7 +413,7 @@ static void pci_config(void)
dev = virtio_blk_pci_init(bus, PCI_SLOT);
/* MSI-X is not enabled */
- addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
+ addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_NO_MSIX;
capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev,
(uint64_t)(uintptr_t)addr);
@@ -459,7 +460,7 @@ static void pci_msix(void)
qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
/* MSI-X is enabled */
- addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_MSIX;
+ addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_MSIX;
capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev,
(uint64_t)(uintptr_t)addr);
@@ -572,7 +573,7 @@ static void pci_idx(void)
qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
/* MSI-X is enabled */
- addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_MSIX;
+ addr = dev->addr + QVIRTIO_PCI_DEVICE_SPECIFIC_MSIX;
capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev,
(uint64_t)(uintptr_t)addr);
--
2.1.0
next prev parent reply other threads:[~2015-01-12 16:43 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 16:39 [Qemu-devel] [PULL v2 00/44] Block patches Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 01/44] qemu-iotests: Remove 091 from quick group Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 02/44] qemu-iotests: Speed up make check-block Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 03/44] block: mark AioContext as recursive Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 04/44] block: do not allocate an iovec per read of a growable/zero_after_eof BDS Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 05/44] block: replace g_new0 with g_new for bottom half allocation Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 06/44] checkpatch: Brace handling on multi-line condition Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 07/44] block: Get full backing filename from string Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 08/44] block: JSON filenames and relative backing files Stefan Hajnoczi
2015-01-12 16:39 ` [Qemu-devel] [PULL v2 09/44] block: Relative backing file for image creation Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 10/44] block/vmdk: Relative backing file for creation Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 11/44] iotests: Add test for relative backing file names Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 12/44] qapi: Fix document for BlockStats.node-name Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 13/44] block: fix spoiling all dirty bitmaps by mirror and migration Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 14/44] qapi: Comment version info in TransactionAction Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 15/44] qmp: Add command 'blockdev-backup' Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 16/44] block: Add blockdev-backup to transaction Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 17/44] qemu-iotests: Test blockdev-backup in 055 Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 18/44] iotests: Filter out "I/O thread spun..." warning Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 19/44] migration/block: fix pending() return value Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 20/44] libqos: Convert malloc-pc allocator to a generic allocator Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 21/44] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 22/44] tests: Prepare virtio-blk-test for multi-arch implementation Stefan Hajnoczi
2015-01-12 16:40 ` Stefan Hajnoczi [this message]
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 24/44] libqos: Add malloc generic Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 25/44] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 26/44] block/raw-posix.c: Fixes raw_getlength() on Mac OS X so that it reports the correct length of a real CD Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 27/44] .gitignore: Ignore generated "common.env" Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 28/44] qemu-iotests: Replace "/bin/true" with "true" Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 29/44] qemu-iotests: Add "_supported_os Linux" to 058 Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 30/44] qemu-iotests: Add supported os parameter for python tests Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 31/44] coroutine-ucontext: use __thread Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 32/44] qemu-thread: add per-thread atexit functions Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 33/44] test-coroutine: avoid overflow on 32-bit systems Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 34/44] QSLIST: add lock-free operations Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 35/44] coroutine: rewrite pool to avoid mutex Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 36/44] coroutine: drop qemu_coroutine_adjust_pool_size Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 37/44] coroutine: try harder not to delete coroutines Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 38/44] block: limited request size in write zeroes unsupported path Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 39/44] block: Split BLOCK_OP_TYPE_COMMIT to BLOCK_OP_TYPE_COMMIT_{SOURCE, TARGET} Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 40/44] ide: Implement VPD response for ATAPI Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 41/44] nvme: Fix get/set number of queues feature Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 42/44] MAINTAINERS: Update email addresses for Chrysostomos Nanakos Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 43/44] MAINTAINERS: Add migration/block* to block subsystem Stefan Hajnoczi
2015-01-12 16:40 ` [Qemu-devel] [PULL v2 44/44] NVMe: Set correct VS Value for 1.1 Compliant Controllers Stefan Hajnoczi
2015-01-12 21:43 ` [Qemu-devel] [PULL v2 00/44] Block patches Peter Maydell
2015-01-13 13:19 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421080834-14724-24-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=marc.mari.barcelo@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).