From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Riku Voipio <riku.voipio@iki.fi>,
Richard Henderson <rth@twiddle.net>,
patches@linaro.org
Subject: [Qemu-devel] [PATCH 06/15] linux-user/vm86.c: Use cpu_ldl_data &c rather than plain ldl &c
Date: Thu, 15 Jan 2015 15:01:49 +0000 [thread overview]
Message-ID: <1421334118-3287-7-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1421334118-3287-1-git-send-email-peter.maydell@linaro.org>
Use the cpu_ld*_data and cpu_st*_data family of functions to access
guest memory in vm86.c rather than the very short-named ldl/stl functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
linux-user/vm86.c | 57 ++++++++++++++++++++++++++++++-------------------------
1 file changed, 31 insertions(+), 26 deletions(-)
diff --git a/linux-user/vm86.c b/linux-user/vm86.c
index 45ef559..22a4eb9 100644
--- a/linux-user/vm86.c
+++ b/linux-user/vm86.c
@@ -45,29 +45,34 @@ static inline int is_revectored(int nr, struct target_revectored_struct *bitmap)
return (((uint8_t *)bitmap)[nr >> 3] >> (nr & 7)) & 1;
}
-static inline void vm_putw(uint32_t segptr, unsigned int reg16, unsigned int val)
+static inline void vm_putw(CPUX86State *env, uint32_t segptr,
+ unsigned int reg16, unsigned int val)
{
- stw(segptr + (reg16 & 0xffff), val);
+ cpu_stw_data(env, segptr + (reg16 & 0xffff), val);
}
-static inline void vm_putl(uint32_t segptr, unsigned int reg16, unsigned int val)
+static inline void vm_putl(CPUX86State *env, uint32_t segptr,
+ unsigned int reg16, unsigned int val)
{
- stl(segptr + (reg16 & 0xffff), val);
+ cpu_stl_data(env, segptr + (reg16 & 0xffff), val);
}
-static inline unsigned int vm_getb(uint32_t segptr, unsigned int reg16)
+static inline unsigned int vm_getb(CPUX86State *env,
+ uint32_t segptr, unsigned int reg16)
{
- return ldub(segptr + (reg16 & 0xffff));
+ return cpu_ldub_data(env, segptr + (reg16 & 0xffff));
}
-static inline unsigned int vm_getw(uint32_t segptr, unsigned int reg16)
+static inline unsigned int vm_getw(CPUX86State *env,
+ uint32_t segptr, unsigned int reg16)
{
- return lduw(segptr + (reg16 & 0xffff));
+ return cpu_lduw_data(env, segptr + (reg16 & 0xffff));
}
-static inline unsigned int vm_getl(uint32_t segptr, unsigned int reg16)
+static inline unsigned int vm_getl(CPUX86State *env,
+ uint32_t segptr, unsigned int reg16)
{
- return ldl(segptr + (reg16 & 0xffff));
+ return cpu_ldl_data(env, segptr + (reg16 & 0xffff));
}
void save_v86_state(CPUX86State *env)
@@ -221,7 +226,7 @@ static void do_int(CPUX86State *env, int intno)
&ts->vm86plus.int21_revectored))
goto cannot_handle;
int_addr = (intno << 2);
- segoffs = ldl(int_addr);
+ segoffs = cpu_ldl_data(env, int_addr);
if ((segoffs >> 16) == TARGET_BIOSSEG)
goto cannot_handle;
LOG_VM86("VM86: emulating int 0x%x. CS:IP=%04x:%04x\n",
@@ -229,9 +234,9 @@ static void do_int(CPUX86State *env, int intno)
/* save old state */
ssp = env->segs[R_SS].selector << 4;
sp = env->regs[R_ESP] & 0xffff;
- vm_putw(ssp, sp - 2, get_vflags(env));
- vm_putw(ssp, sp - 4, env->segs[R_CS].selector);
- vm_putw(ssp, sp - 6, env->eip);
+ vm_putw(env, ssp, sp - 2, get_vflags(env));
+ vm_putw(env, ssp, sp - 4, env->segs[R_CS].selector);
+ vm_putw(env, ssp, sp - 6, env->eip);
ADD16(env->regs[R_ESP], -6);
/* goto interrupt handler */
env->eip = segoffs & 0xffff;
@@ -285,7 +290,7 @@ void handle_vm86_fault(CPUX86State *env)
data32 = 0;
pref_done = 0;
do {
- opcode = vm_getb(csp, ip);
+ opcode = vm_getb(env, csp, ip);
ADD16(ip, 1);
switch (opcode) {
case 0x66: /* 32-bit data */ data32=1; break;
@@ -306,10 +311,10 @@ void handle_vm86_fault(CPUX86State *env)
switch(opcode) {
case 0x9c: /* pushf */
if (data32) {
- vm_putl(ssp, sp - 4, get_vflags(env));
+ vm_putl(env, ssp, sp - 4, get_vflags(env));
ADD16(env->regs[R_ESP], -4);
} else {
- vm_putw(ssp, sp - 2, get_vflags(env));
+ vm_putw(env, ssp, sp - 2, get_vflags(env));
ADD16(env->regs[R_ESP], -2);
}
env->eip = ip;
@@ -317,10 +322,10 @@ void handle_vm86_fault(CPUX86State *env)
case 0x9d: /* popf */
if (data32) {
- newflags = vm_getl(ssp, sp);
+ newflags = vm_getl(env, ssp, sp);
ADD16(env->regs[R_ESP], 4);
} else {
- newflags = vm_getw(ssp, sp);
+ newflags = vm_getw(env, ssp, sp);
ADD16(env->regs[R_ESP], 2);
}
env->eip = ip;
@@ -335,7 +340,7 @@ void handle_vm86_fault(CPUX86State *env)
VM86_FAULT_RETURN;
case 0xcd: /* int */
- intno = vm_getb(csp, ip);
+ intno = vm_getb(env, csp, ip);
ADD16(ip, 1);
env->eip = ip;
if (ts->vm86plus.vm86plus.flags & TARGET_vm86dbg_active) {
@@ -350,14 +355,14 @@ void handle_vm86_fault(CPUX86State *env)
case 0xcf: /* iret */
if (data32) {
- newip = vm_getl(ssp, sp) & 0xffff;
- newcs = vm_getl(ssp, sp + 4) & 0xffff;
- newflags = vm_getl(ssp, sp + 8);
+ newip = vm_getl(env, ssp, sp) & 0xffff;
+ newcs = vm_getl(env, ssp, sp + 4) & 0xffff;
+ newflags = vm_getl(env, ssp, sp + 8);
ADD16(env->regs[R_ESP], 12);
} else {
- newip = vm_getw(ssp, sp);
- newcs = vm_getw(ssp, sp + 2);
- newflags = vm_getw(ssp, sp + 4);
+ newip = vm_getw(env, ssp, sp);
+ newcs = vm_getw(env, ssp, sp + 2);
+ newflags = vm_getw(env, ssp, sp + 4);
ADD16(env->regs[R_ESP], 6);
}
env->eip = newip;
--
1.9.1
next prev parent reply other threads:[~2015-01-15 15:15 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 15:01 [Qemu-devel] [PATCH 00/15] Clean up cpu-ldst ld/st memory accessors Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 01/15] cpu_ldst.h: Remove unused ldul_ macros Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 02/15] monitor.c: Use ld*_p() instead of ld*_raw() Peter Maydell
2015-01-15 15:54 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 03/15] target-sparc: Don't use {ld, st}*_raw functions Peter Maydell
2015-01-15 15:55 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 04/15] linux-user/elfload.c: Don't use _raw accessor functions Peter Maydell
2015-01-15 15:56 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 05/15] bsd-user/elfload.c: Don't use ldl() or ldq_raw() Peter Maydell
2015-01-15 15:57 ` Alex Bennée
2015-01-15 15:01 ` Peter Maydell [this message]
2015-01-15 15:58 ` [Qemu-devel] [PATCH 06/15] linux-user/vm86.c: Use cpu_ldl_data &c rather than plain ldl &c Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 07/15] linux-user/main.c (m68k): Use get_user_u16 rather than lduw in cpu_loop Peter Maydell
2015-01-15 16:03 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 08/15] target-mips: Don't use _raw load/store accessors Peter Maydell
2015-01-19 9:05 ` Alex Bennée
2015-01-19 10:29 ` Peter Maydell
2015-01-19 15:09 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 09/15] cpu_ldst.h: Drop unused ld/st*_kernel defines Peter Maydell
2015-01-19 9:09 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 10/15] cpu_ldst.h: Remove unused very short ld*/st* defines Peter Maydell
2015-01-19 9:09 ` Alex Bennée
2015-01-15 15:01 ` [Qemu-devel] [PATCH 11/15] cpu_ldst.h: Use inline functions for usermode cpu_ld/st accessors Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 12/15] cpu_ldst_template.h: Use ld*_p directly rather than via ld*_raw macros Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 13/15] cpu_ldst.h: Drop unused _raw macros, saddr() and laddr() Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 14/15] cpu_ldst_template.h: Drop unused cpu_ldfq/stfq/ldfl/stfl accessors Peter Maydell
2015-01-15 15:01 ` [Qemu-devel] [PATCH 15/15] cpu_ldst.h, cpu-all.h, bswap.h: Update documentation on ld/st accessors Peter Maydell
2015-01-15 15:32 ` [Qemu-devel] [PATCH 00/15] Clean up cpu-ldst ld/st memory accessors Lluís Vilanova
2015-01-15 18:24 ` Peter Maydell
2015-01-15 19:10 ` Lluís Vilanova
2015-01-15 20:01 ` Paolo Bonzini
2015-01-16 18:50 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421334118-3287-7-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=riku.voipio@iki.fi \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).