From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Peter Wu <peter@lekensteyn.nl>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 09/16] block/dmg: fix sector data offset calculation
Date: Fri, 16 Jan 2015 15:37:06 +0000 [thread overview]
Message-ID: <1421422633-25536-10-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1421422633-25536-1-git-send-email-stefanha@redhat.com>
From: Peter Wu <peter@lekensteyn.nl>
This patch addresses two issues:
- The data fork offset was not taken into account, resulting in failure
to read an InstallESD.dmg file (5164763151 bytes) which had a
non-zero DataForkOffset field.
- The offset of the previous block ("partition") was unconditionally
added to the current block because older files would start the input
offset of a new block at zero. Newer files (including vlc-2.1.5.dmg,
tuxpaint-0.9.15-macosx.dmg and OS X Yosemite [MAS].dmg) failed in
reads because these files have chunk offsets, relative to the begin
of a data fork.
Now the data offset of the mish is taken into account. While we could
check that the data_offset is within the data fork, let's not do that
here as it would only result in parse failures on invalid files (rather
than gracefully handling such bad files). dmg_read will error out if
the offset is incorrect.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-9-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/dmg.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/block/dmg.c b/block/dmg.c
index 3f8f1cc..65fc7fe 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -186,7 +186,7 @@ static int64_t dmg_find_koly_offset(BlockDriverState *file_bs, Error **errp)
typedef struct DmgHeaderState {
/* used internally by dmg_read_mish_block to remember offsets of blocks
* across calls */
- uint64_t last_in_offset;
+ uint64_t data_fork_offset;
uint64_t last_out_offset;
/* exported for dmg_open */
uint32_t max_compressed_size;
@@ -201,6 +201,8 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
size_t new_size;
uint32_t chunk_count;
int64_t offset = 0;
+ uint64_t data_offset;
+ uint64_t in_offset = ds->data_fork_offset;
type = buff_read_uint32(buffer, offset);
/* skip data that is not a valid MISH block (invalid magic or too small) */
@@ -209,8 +211,12 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
return 0;
}
- offset += 4;
- offset += 200;
+ /* location in data fork for (compressed) blob (in bytes) */
+ data_offset = buff_read_uint64(buffer, offset + 0x18);
+ in_offset += data_offset;
+
+ /* move to begin of chunk entries */
+ offset += 204;
chunk_count = (count - 204) / 40;
new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
@@ -226,7 +232,6 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
if (s->types[i] != 0x80000005 && s->types[i] != 1 &&
s->types[i] != 2) {
if (s->types[i] == 0xffffffff && i > 0) {
- ds->last_in_offset = s->offsets[i - 1] + s->lengths[i - 1];
ds->last_out_offset = s->sectors[i - 1] +
s->sectorcounts[i - 1];
}
@@ -253,7 +258,7 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
}
s->offsets[i] = buff_read_uint64(buffer, offset);
- s->offsets[i] += ds->last_in_offset;
+ s->offsets[i] += in_offset;
offset += 8;
s->lengths[i] = buff_read_uint64(buffer, offset);
@@ -411,7 +416,7 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
/* used by dmg_read_mish_block to keep track of the current I/O position */
- ds.last_in_offset = 0;
+ ds.data_fork_offset = 0;
ds.last_out_offset = 0;
ds.max_compressed_size = 1;
ds.max_sectors_per_chunk = 1;
@@ -423,6 +428,15 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
+ /* offset of data fork (DataForkOffset) */
+ ret = read_uint64(bs, offset + 0x18, &ds.data_fork_offset);
+ if (ret < 0) {
+ goto fail;
+ } else if (ds.data_fork_offset > offset) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
/* offset of resource fork (RsrcForkOffset) */
ret = read_uint64(bs, offset + 0x28, &rsrc_fork_offset);
if (ret < 0) {
--
2.1.0
next prev parent reply other threads:[~2015-01-16 15:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-16 15:36 [Qemu-devel] [PULL 00/16] Block patches Stefan Hajnoczi
2015-01-16 15:36 ` [Qemu-devel] [PULL 01/16] block: add event when disk usage exceeds threshold Stefan Hajnoczi
2015-01-16 15:36 ` [Qemu-devel] [PULL 02/16] block/dmg: properly detect the UDIF trailer Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 03/16] block/dmg: extract mish block decoding functionality Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 04/16] block/dmg: extract processing of resource forks Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 05/16] block/dmg: process a buffer instead of reading ints Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 06/16] block/dmg: validate chunk size to avoid overflow Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 07/16] block/dmg: process XML plists Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 08/16] block/dmg: set virtual size to a non-zero value Stefan Hajnoczi
2015-01-16 15:37 ` Stefan Hajnoczi [this message]
2015-01-16 15:37 ` [Qemu-devel] [PULL 10/16] block/dmg: use SectorNumber from BLKX header Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 11/16] block/dmg: factor out block type check Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 12/16] block/dmg: support bzip2 block entry types Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 13/16] block/dmg: improve zeroes handling Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 14/16] qed: check for header size overflow Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 15/16] qemu-iotests: add 116 invalid QED input file tests Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 16/16] qemu-iotests: Fix supported_oses check Stefan Hajnoczi
2015-01-16 16:46 ` [Qemu-devel] [PULL 00/16] Block patches Peter Maydell
2015-01-17 10:41 ` Peter Wu
2015-01-20 10:26 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421422633-25536-10-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peter@lekensteyn.nl \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).