From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Peter Wu <peter@lekensteyn.nl>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 03/16] block/dmg: extract mish block decoding functionality
Date: Fri, 16 Jan 2015 15:37:00 +0000 [thread overview]
Message-ID: <1421422633-25536-4-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1421422633-25536-1-git-send-email-stefanha@redhat.com>
From: Peter Wu <peter@lekensteyn.nl>
Extract the mish block decoder such that this can be used for other
formats in the future. A new DmgHeaderState struct is introduced to
share state while decoding.
The code is kept unchanged as much as possible, a "fail" label is added
for example where a simple return would probably do. In dmg_open, the
variable "tmp" is renamed to "rsrc_data_offset" for clarity and comments
have been added explaining various data.
Note that this patch has one subtle difference with the previous
version which should not affect functionality. In the previous code,
the end of a resource was inferred from the mish block (the offsets
would be increased by the fields). In this patch, the resource length
is used instead to avoid the need to rely on the previous offsets.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1420566495-13284-3-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/dmg.c | 228 +++++++++++++++++++++++++++++++++++-------------------------
1 file changed, 133 insertions(+), 95 deletions(-)
diff --git a/block/dmg.c b/block/dmg.c
index cdad28f..c571ac9 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -171,19 +171,138 @@ static int64_t dmg_find_koly_offset(BlockDriverState *file_bs, Error **errp)
return -EINVAL;
}
+/* used when building the sector table */
+typedef struct DmgHeaderState {
+ /* used internally by dmg_read_mish_block to remember offsets of blocks
+ * across calls */
+ uint64_t last_in_offset;
+ uint64_t last_out_offset;
+ /* exported for dmg_open */
+ uint32_t max_compressed_size;
+ uint32_t max_sectors_per_chunk;
+} DmgHeaderState;
+
+static int dmg_read_mish_block(BlockDriverState *bs, DmgHeaderState *ds,
+ int64_t offset, uint32_t count)
+{
+ BDRVDMGState *s = bs->opaque;
+ uint32_t type, i;
+ int ret;
+ size_t new_size;
+ uint32_t chunk_count;
+
+ ret = read_uint32(bs, offset, &type);
+ if (ret < 0) {
+ goto fail;
+ }
+
+ /* skip data that is not a valid MISH block (invalid magic or too small) */
+ if (type != 0x6d697368 || count < 244) {
+ /* assume success for now */
+ return 0;
+ }
+
+ offset += 4;
+ offset += 200;
+
+ chunk_count = (count - 204) / 40;
+ new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
+ s->types = g_realloc(s->types, new_size / 2);
+ s->offsets = g_realloc(s->offsets, new_size);
+ s->lengths = g_realloc(s->lengths, new_size);
+ s->sectors = g_realloc(s->sectors, new_size);
+ s->sectorcounts = g_realloc(s->sectorcounts, new_size);
+
+ for (i = s->n_chunks; i < s->n_chunks + chunk_count; i++) {
+ ret = read_uint32(bs, offset, &s->types[i]);
+ if (ret < 0) {
+ goto fail;
+ }
+ offset += 4;
+ if (s->types[i] != 0x80000005 && s->types[i] != 1 &&
+ s->types[i] != 2) {
+ if (s->types[i] == 0xffffffff && i > 0) {
+ ds->last_in_offset = s->offsets[i - 1] + s->lengths[i - 1];
+ ds->last_out_offset = s->sectors[i - 1] +
+ s->sectorcounts[i - 1];
+ }
+ chunk_count--;
+ i--;
+ offset += 36;
+ continue;
+ }
+ offset += 4;
+
+ ret = read_uint64(bs, offset, &s->sectors[i]);
+ if (ret < 0) {
+ goto fail;
+ }
+ s->sectors[i] += ds->last_out_offset;
+ offset += 8;
+
+ ret = read_uint64(bs, offset, &s->sectorcounts[i]);
+ if (ret < 0) {
+ goto fail;
+ }
+ offset += 8;
+
+ if (s->sectorcounts[i] > DMG_SECTORCOUNTS_MAX) {
+ error_report("sector count %" PRIu64 " for chunk %" PRIu32
+ " is larger than max (%u)",
+ s->sectorcounts[i], i, DMG_SECTORCOUNTS_MAX);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ ret = read_uint64(bs, offset, &s->offsets[i]);
+ if (ret < 0) {
+ goto fail;
+ }
+ s->offsets[i] += ds->last_in_offset;
+ offset += 8;
+
+ ret = read_uint64(bs, offset, &s->lengths[i]);
+ if (ret < 0) {
+ goto fail;
+ }
+ offset += 8;
+
+ if (s->lengths[i] > DMG_LENGTHS_MAX) {
+ error_report("length %" PRIu64 " for chunk %" PRIu32
+ " is larger than max (%u)",
+ s->lengths[i], i, DMG_LENGTHS_MAX);
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ update_max_chunk_size(s, i, &ds->max_compressed_size,
+ &ds->max_sectors_per_chunk);
+ }
+ s->n_chunks += chunk_count;
+ return 0;
+
+fail:
+ return ret;
+}
+
static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVDMGState *s = bs->opaque;
- uint64_t info_begin, info_end, last_in_offset, last_out_offset;
- uint32_t count, tmp;
- uint32_t max_compressed_size = 1, max_sectors_per_chunk = 1, i;
+ DmgHeaderState ds;
+ uint64_t info_begin, info_end;
+ uint32_t count, rsrc_data_offset;
int64_t offset;
int ret;
bs->read_only = 1;
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
+ /* used by dmg_read_mish_block to keep track of the current I/O position */
+ ds.last_in_offset = 0;
+ ds.last_out_offset = 0;
+ ds.max_compressed_size = 1;
+ ds.max_sectors_per_chunk = 1;
/* locate the UDIF trailer */
offset = dmg_find_koly_offset(bs->file, errp);
@@ -200,10 +319,10 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
- ret = read_uint32(bs, info_begin, &tmp);
+ ret = read_uint32(bs, info_begin, &rsrc_data_offset);
if (ret < 0) {
goto fail;
- } else if (tmp != 0x100) {
+ } else if (rsrc_data_offset != 0x100) {
ret = -EINVAL;
goto fail;
}
@@ -215,15 +334,15 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
ret = -EINVAL;
goto fail;
}
+ /* end of resource data, ignoring the following resource map */
info_end = info_begin + count;
+ /* begin of resource data (consisting of one or more resources) */
offset = info_begin + 0x100;
- /* read offsets */
- last_in_offset = last_out_offset = 0;
+ /* read offsets (mish blocks) from one or more resources in resource data */
while (offset < info_end) {
- uint32_t type;
-
+ /* size of following resource */
ret = read_uint32(bs, offset, &count);
if (ret < 0) {
goto fail;
@@ -233,100 +352,19 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
}
offset += 4;
- ret = read_uint32(bs, offset, &type);
+ ret = dmg_read_mish_block(bs, &ds, offset, count);
if (ret < 0) {
goto fail;
}
-
- if (type == 0x6d697368 && count >= 244) {
- size_t new_size;
- uint32_t chunk_count;
-
- offset += 4;
- offset += 200;
-
- chunk_count = (count - 204) / 40;
- new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
- s->types = g_realloc(s->types, new_size / 2);
- s->offsets = g_realloc(s->offsets, new_size);
- s->lengths = g_realloc(s->lengths, new_size);
- s->sectors = g_realloc(s->sectors, new_size);
- s->sectorcounts = g_realloc(s->sectorcounts, new_size);
-
- for (i = s->n_chunks; i < s->n_chunks + chunk_count; i++) {
- ret = read_uint32(bs, offset, &s->types[i]);
- if (ret < 0) {
- goto fail;
- }
- offset += 4;
- if (s->types[i] != 0x80000005 && s->types[i] != 1 &&
- s->types[i] != 2) {
- if (s->types[i] == 0xffffffff && i > 0) {
- last_in_offset = s->offsets[i - 1] + s->lengths[i - 1];
- last_out_offset = s->sectors[i - 1] +
- s->sectorcounts[i - 1];
- }
- chunk_count--;
- i--;
- offset += 36;
- continue;
- }
- offset += 4;
-
- ret = read_uint64(bs, offset, &s->sectors[i]);
- if (ret < 0) {
- goto fail;
- }
- s->sectors[i] += last_out_offset;
- offset += 8;
-
- ret = read_uint64(bs, offset, &s->sectorcounts[i]);
- if (ret < 0) {
- goto fail;
- }
- offset += 8;
-
- if (s->sectorcounts[i] > DMG_SECTORCOUNTS_MAX) {
- error_report("sector count %" PRIu64 " for chunk %" PRIu32
- " is larger than max (%u)",
- s->sectorcounts[i], i, DMG_SECTORCOUNTS_MAX);
- ret = -EINVAL;
- goto fail;
- }
-
- ret = read_uint64(bs, offset, &s->offsets[i]);
- if (ret < 0) {
- goto fail;
- }
- s->offsets[i] += last_in_offset;
- offset += 8;
-
- ret = read_uint64(bs, offset, &s->lengths[i]);
- if (ret < 0) {
- goto fail;
- }
- offset += 8;
-
- if (s->lengths[i] > DMG_LENGTHS_MAX) {
- error_report("length %" PRIu64 " for chunk %" PRIu32
- " is larger than max (%u)",
- s->lengths[i], i, DMG_LENGTHS_MAX);
- ret = -EINVAL;
- goto fail;
- }
-
- update_max_chunk_size(s, i, &max_compressed_size,
- &max_sectors_per_chunk);
- }
- s->n_chunks += chunk_count;
- }
+ /* advance offset by size of resource */
+ offset += count;
}
/* initialize zlib engine */
s->compressed_chunk = qemu_try_blockalign(bs->file,
- max_compressed_size + 1);
+ ds.max_compressed_size + 1);
s->uncompressed_chunk = qemu_try_blockalign(bs->file,
- 512 * max_sectors_per_chunk);
+ 512 * ds.max_sectors_per_chunk);
if (s->compressed_chunk == NULL || s->uncompressed_chunk == NULL) {
ret = -ENOMEM;
goto fail;
--
2.1.0
next prev parent reply other threads:[~2015-01-16 15:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-16 15:36 [Qemu-devel] [PULL 00/16] Block patches Stefan Hajnoczi
2015-01-16 15:36 ` [Qemu-devel] [PULL 01/16] block: add event when disk usage exceeds threshold Stefan Hajnoczi
2015-01-16 15:36 ` [Qemu-devel] [PULL 02/16] block/dmg: properly detect the UDIF trailer Stefan Hajnoczi
2015-01-16 15:37 ` Stefan Hajnoczi [this message]
2015-01-16 15:37 ` [Qemu-devel] [PULL 04/16] block/dmg: extract processing of resource forks Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 05/16] block/dmg: process a buffer instead of reading ints Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 06/16] block/dmg: validate chunk size to avoid overflow Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 07/16] block/dmg: process XML plists Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 08/16] block/dmg: set virtual size to a non-zero value Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 09/16] block/dmg: fix sector data offset calculation Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 10/16] block/dmg: use SectorNumber from BLKX header Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 11/16] block/dmg: factor out block type check Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 12/16] block/dmg: support bzip2 block entry types Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 13/16] block/dmg: improve zeroes handling Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 14/16] qed: check for header size overflow Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 15/16] qemu-iotests: add 116 invalid QED input file tests Stefan Hajnoczi
2015-01-16 15:37 ` [Qemu-devel] [PULL 16/16] qemu-iotests: Fix supported_oses check Stefan Hajnoczi
2015-01-16 16:46 ` [Qemu-devel] [PULL 00/16] Block patches Peter Maydell
2015-01-17 10:41 ` Peter Wu
2015-01-20 10:26 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421422633-25536-4-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peter@lekensteyn.nl \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).