[Qemu-devel] [PATCH v2 1/5] qga: introduce three guest memory block commmands with stubs

[zhanghailiang <zhang.zhanghailiang@huawei.com>]

Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.

With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
---
 qga/commands-posix.c |  38 +++++++++++++++++
 qga/commands-win32.c |  19 +++++++++
 qga/qapi-schema.json | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 171 insertions(+)

diff --git a/qga/commands-posix.c b/qga/commands-posix.c
index f6f3e3c..76dc07b 100644
--- a/qga/commands-posix.c
+++ b/qga/commands-posix.c
@@ -1875,6 +1875,25 @@ int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
     return processed;
 }
 
+GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+GuestMemoryBlockResponseList *
+qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+int64_t qmp_guest_get_memory_block_size(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return -1;
+}
+
 #else /* defined(__linux__) */
 
 void qmp_guest_suspend_disk(Error **errp)
@@ -1910,6 +1929,25 @@ int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
     return -1;
 }
 
+GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+GuestMemoryBlockResponseList *
+qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+int64_t qmp_guest_get_memory_block_size(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return -1;
+}
+
 #endif
 
 #if !defined(CONFIG_FSFREEZE)
diff --git a/qga/commands-win32.c b/qga/commands-win32.c
index 3bcbeae..c596c0c 100644
--- a/qga/commands-win32.c
+++ b/qga/commands-win32.c
@@ -446,6 +446,25 @@ int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
     return -1;
 }
 
+GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+GuestMemoryBlockResponseList *
+qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return NULL;
+}
+
+int64_t qmp_guest_get_memory_block_size(Error **errp)
+{
+    error_set(errp, QERR_UNSUPPORTED);
+    return -1;
+}
+
 /* add unsupported commands to the blacklist */
 GList *ga_command_blacklist_init(GList *blacklist)
 {
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 376e79f..20ba2ad 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -738,3 +738,117 @@
 ##
 { 'command': 'guest-get-fsinfo',
   'returns': ['GuestFilesystemInfo'] }
+
+##
+# @GuestMemoryBlock:
+#
+# @phys-index: Arbitrary guest-specific unique identifier of the MEMORY BLOCK.
+#
+# @online: Whether the MEMORY BLOCK is enabled in guest.
+#
+# @can-offline: #optional Whether offlining the MEMORY BLOCK is possible.
+#               This member is always filled in by the guest agent when the
+#               structure is returned, and always ignored on input (hence it
+#               can be omitted then).
+#
+# Since: 2.3
+##
+{ 'type': 'GuestMemoryBlock',
+  'data': {'phys-index': 'uint64',
+           'online': 'bool',
+           '*can-offline': 'bool'} }
+
+##
+# @guest-get-memory-blocks:
+#
+# Retrieve the list of the guest's memory blocks.
+#
+# This is a read-only operation.
+#
+# Returns: The list of all memory blocks the guest knows about.
+# Each memory block is put on the list exactly once, but their order
+# is unspecified.
+#
+# Since: 2.3
+##
+{ 'command': 'guest-get-memory-blocks',
+  'returns': ['GuestMemoryBlock'] }
+
+##
+# @GuestMemoryBlockResponseType
+#
+# An enumeration of memory block operation result.
+#
+# @sucess: the operation of online/offline memory block is successful.
+# @not-found: can't find the corresponding memoryXXX directory in sysfs.
+# @operation-not-supported: for some old kernels, it does not support
+#                           online or offline memory block.
+# @operation-failed: the operation of online/offline memory block fails,
+#                    because of some errors happen.
+#
+# Since: 2.3
+##
+{ 'enum': 'GuestMemoryBlockResponseType',
+  'data': ['success', 'not-found', 'operation-not-supported',
+           'operation-failed'] }
+
+##
+# @GuestMemoryBlockResponse:
+#
+# @phys-index: same with the 'phys-index' member of @GuestMemoryBlock.
+#
+# @response: the result of memory block operation.
+#
+# @error-code: #optional the error number.
+#               When memory block operation fails, we assign the value of
+#               'errno' to this member, it indicates what goes wrong.
+#               When the operation succeeds, it will be omitted.
+#
+# Since: 2.3
+##
+{ 'type': 'GuestMemoryBlockResponse',
+  'data': { 'phys-index': 'uint64',
+            'response': 'GuestMemoryBlockResponseType',
+            '*error-code': 'int' }}
+
+##
+# @guest-set-memory-blocks:
+#
+# Attempt to reconfigure (currently: enable/disable) state of memory blocks
+# inside the guest.
+#
+# The input list is processed node by node in order. In each node @phys-index
+# is used to look up the guest MEMORY BLOCK, for which @online specifies the
+# requested state. The set of distinct @phys-index's is only required to be a
+# subset of the guest-supported identifiers. There's no restriction on list
+# length or on repeating the same @phys-index (with possibly different @online
+# field).
+# Preferably the input list should describe a modified subset of
+# @guest-get-memory-blocks' return value.
+#
+# Returns: The operation results, it is a list of @GuestMemoryBlockResponse,
+#          which is corresponding to the input list.
+#
+#          Note: it will return NULL if the @mem-blks list was empty on input,
+#          or there is an error, and in this case, guest state will not be
+#          changed.
+#
+# Since: 2.3
+##
+{ 'command': 'guest-set-memory-blocks',
+  'data':    {'mem-blks': ['GuestMemoryBlock'] },
+  'returns': ['GuestMemoryBlockResponse'] }
+
+##
+# @guest-get-memory-block-size:
+#
+# Get the the size (in bytes) of a memory block in guest.
+# It is the unit of memory block online/offline operation (also called Logical
+# Memory Hotplug).
+#
+# Returns: memory block size in bytes.
+#
+# Since 2.3
+##
+{ 'command': 'guest-get-memory-block-size',
+  'returns': 'int' }
-- 
1.7.12.4