From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Mike Day <ncmike@ncultra.org>,
borntraeger@de.ibm.com, famz@redhat.com, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH 13/15] cosmetic changes preparing for the following patches
Date: Thu, 22 Jan 2015 15:47:31 +0100 [thread overview]
Message-ID: <1421938053-10318-14-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1421938053-10318-1-git-send-email-pbonzini@redhat.com>
From: Mike Day <ncmike@ncultra.org>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch_init.c | 5 +----
exec.c | 68 +++++++++++++++++++++++++++++++++++++++----------------------
2 files changed, 45 insertions(+), 28 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 89c8fa4..b13f74b 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -688,9 +688,9 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage)
}
}
}
+
last_seen_block = block;
last_offset = offset;
-
return bytes_sent;
}
@@ -1117,7 +1117,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
ret = -EINVAL;
break;
}
-
ch = qemu_get_byte(f);
ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
break;
@@ -1128,7 +1127,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
ret = -EINVAL;
break;
}
-
qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
break;
case RAM_SAVE_FLAG_XBZRLE:
@@ -1138,7 +1136,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
ret = -EINVAL;
break;
}
-
if (load_xbzrle(f, addr, host) < 0) {
error_report("Failed to decompress XBZRLE page at "
RAM_ADDR_FMT, addr);
diff --git a/exec.c b/exec.c
index 2a142fe..e01458d 100644
--- a/exec.c
+++ b/exec.c
@@ -1631,7 +1631,6 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
memory_try_enable_merging(vaddr, length);
qemu_ram_setup_dump(vaddr, length);
}
- return;
}
}
}
@@ -1639,49 +1638,60 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
int qemu_get_ram_fd(ram_addr_t addr)
{
- RAMBlock *block = qemu_get_ram_block(addr);
+ RAMBlock *block;
+ int fd;
- return block->fd;
+ block = qemu_get_ram_block(addr);
+ fd = atomic_rcu_read(&block->fd);
+ return fd;
}
void *qemu_get_ram_block_host_ptr(ram_addr_t addr)
{
- RAMBlock *block = qemu_get_ram_block(addr);
+ RAMBlock *block;
+ void *ptr;
- return ramblock_ptr(block, 0);
+ block = qemu_get_ram_block(addr);
+ ptr = ramblock_ptr(block, 0);
+ return ptr;
}
/* Return a host pointer to ram allocated with qemu_ram_alloc.
- With the exception of the softmmu code in this file, this should
- only be used for local memory (e.g. video ram) that the device owns,
- and knows it isn't going to access beyond the end of the block.
-
- It should not be used for general purpose DMA.
- Use cpu_physical_memory_map/cpu_physical_memory_rw instead.
+ * This should not be used for general purpose DMA. Use address_space_map
+ * or address_space_rw instead. For local memory (e.g. video ram) that the
+ * device owns, use memory_region_get_ram_ptr.
*/
void *qemu_get_ram_ptr(ram_addr_t addr)
{
- RAMBlock *block = qemu_get_ram_block(addr);
+ RAMBlock *block;
+ void *ptr;
- if (xen_enabled()) {
+ block = qemu_get_ram_block(addr);
+
+ if (xen_enabled() && block->host == NULL) {
/* We need to check if the requested address is in the RAM
* because we don't want to map the entire memory in QEMU.
* In that case just map until the end of the page.
*/
if (block->offset == 0) {
- return xen_map_cache(addr, 0, 0);
- } else if (block->host == NULL) {
- block->host =
- xen_map_cache(block->offset, block->max_length, 1);
+ ptr = xen_map_cache(addr, 0, 0);
+ goto done;
}
+
+ block->host = xen_map_cache(block->offset, block->max_length, 1);
}
- return ramblock_ptr(block, addr - block->offset);
+ ptr = ramblock_ptr(block, addr - block->offset);
+
+done:
+ return ptr;
}
/* Return a host pointer to guest's ram. Similar to qemu_get_ram_ptr
- * but takes a size argument */
+ * but takes a size argument.
+ */
static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
{
+ void *ptr;
if (*size == 0) {
return NULL;
}
@@ -1689,12 +1699,12 @@ static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
return xen_map_cache(addr, *size, 1);
} else {
RAMBlock *block;
-
QTAILQ_FOREACH(block, &ram_list.blocks, next) {
if (addr - block->offset < block->max_length) {
if (addr - block->offset + *size > block->max_length)
*size = block->max_length - addr + block->offset;
- return ramblock_ptr(block, addr - block->offset);
+ ptr = ramblock_ptr(block, addr - block->offset);
+ return ptr;
}
}
@@ -1704,15 +1714,24 @@ static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
}
/* Some of the softmmu routines need to translate from a host pointer
- (typically a TLB entry) back to a ram offset. */
+ * (typically a TLB entry) back to a ram offset.
+ *
+ * By the time this function returns, the returned pointer is not protected
+ * by RCU anymore. If the caller is not within an RCU critical section and
+ * does not hold the iothread lock, it must have other means of protecting the
+ * pointer, such as a reference to the region that includes the incoming
+ * ram_addr_t.
+ */
MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
{
RAMBlock *block;
uint8_t *host = ptr;
+ MemoryRegion *mr;
if (xen_enabled()) {
*ram_addr = xen_ram_addr_from_mapcache(ptr);
- return qemu_get_ram_block(*ram_addr)->mr;
+ mr = qemu_get_ram_block(*ram_addr)->mr;
+ return mr;
}
block = ram_list.mru_block;
@@ -1734,7 +1753,8 @@ MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
found:
*ram_addr = block->offset + (host - block->host);
- return block->mr;
+ mr = block->mr;
+ return mr;
}
static void notdirty_mem_write(void *opaque, hwaddr ram_addr,
--
1.8.3.1
next prev parent reply other threads:[~2015-01-22 14:48 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-22 14:47 [Qemu-devel] [PATCH v2 00/15] RCUification of the memory API, parts 1 and 2 Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 01/15] rcu: add rcu library Paolo Bonzini
2015-01-26 3:13 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 02/15] rcu: add rcutorture Paolo Bonzini
2015-01-26 3:31 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 03/15] rcu: allow nesting of rcu_read_lock/rcu_read_unlock Paolo Bonzini
2015-01-26 3:32 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 04/15] rcu: add call_rcu Paolo Bonzini
2015-01-26 6:04 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 05/15] memory: remove assertion on memory_region_destroy Paolo Bonzini
2015-01-26 6:04 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 06/15] memory: protect current_map by RCU Paolo Bonzini
2015-01-26 6:16 ` Fam Zheng
2015-01-22 14:47 ` [Qemu-devel] [PATCH 07/15] memory: avoid ref/unref in memory_region_find Paolo Bonzini
2015-01-26 6:24 ` Fam Zheng
2015-01-26 9:19 ` Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 08/15] exec: introduce cpu_reload_memory_map Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 09/15] exec: make iotlb RCU-friendly Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 10/15] exec: RCUify AddressSpaceDispatch Paolo Bonzini
2015-01-28 5:45 ` Fam Zheng
2015-01-28 9:44 ` Paolo Bonzini
2015-02-03 10:07 ` Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 11/15] rcu: introduce RCU-enabled QLIST Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 12/15] exec: protect mru_block with RCU Paolo Bonzini
2015-01-22 14:47 ` Paolo Bonzini [this message]
2015-01-22 14:47 ` [Qemu-devel] [PATCH 14/15] exec: convert ram_list to QLIST Paolo Bonzini
2015-01-22 14:47 ` [Qemu-devel] [PATCH 15/15] Convert ram_list to RCU Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421938053-10318-14-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=famz@redhat.com \
--cc=ncmike@ncultra.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).