From: "Denis V. Lunev" <den@openvz.org>
Cc: Kevin Wolf <kwolf@redhat.com>, Fam Zheng <famz@redhat.com>,
Peter Lieven <pl@kamp.de>,
qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>,
"Denis V. Lunev" <den@openvz.org>
Subject: [Qemu-devel] [PATCH 3/7] block/raw-posix: refactor handle_aiocb_write_zeroes a bit
Date: Tue, 27 Jan 2015 16:51:35 +0300 [thread overview]
Message-ID: <1422366699-17473-4-git-send-email-den@openvz.org> (raw)
In-Reply-To: <1422366699-17473-1-git-send-email-den@openvz.org>
move code dealing with a block device to a separate function. This will
allow to implement additional processing for ordinary files.
Pls note, that xfs_code has been moved before checking for
s->has_write_zeroes as xfs_write_zeroes does not touch this flag inside.
This makes code a bit more consistent.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
---
block/raw-posix.c | 48 +++++++++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 19 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 2aa268a..24e1fab 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -914,41 +914,51 @@ static int do_fallocate(int fd, int mode, off_t offset, off_t len)
}
#endif
-static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
+static ssize_t handle_aiocb_write_zeroes_block(RawPosixAIOData *aiocb)
{
- int ret = -EOPNOTSUPP;
+ int ret = -ENOTSUP;
BDRVRawState *s = aiocb->bs->opaque;
- if (s->has_write_zeroes == 0) {
+ if (!s->has_write_zeroes) {
return -ENOTSUP;
}
- if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
#ifdef BLKZEROOUT
- do {
- uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
- if (ioctl(aiocb->aio_fildes, BLKZEROOUT, range) == 0) {
- return 0;
- }
- } while (errno == EINTR);
-
- ret = -errno;
-#endif
- } else {
-#ifdef CONFIG_XFS
- if (s->is_xfs) {
- return xfs_write_zeroes(s, aiocb->aio_offset, aiocb->aio_nbytes);
+ do {
+ uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
+ if (ioctl(aiocb->aio_fildes, BLKZEROOUT, range) == 0) {
+ return 0;
}
+ } while (errno == EINTR);
+
+ ret = translate_err(-errno);
#endif
- }
- ret = translate_err(ret);
if (ret == -ENOTSUP) {
s->has_write_zeroes = false;
}
return ret;
}
+static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
+{
+ int ret = -ENOTSUP;
+ BDRVRawState *s = aiocb->bs->opaque;
+
+ if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
+ return handle_aiocb_write_zeroes_block(aiocb);
+ }
+
+#ifdef CONFIG_XFS
+ if (s->is_xfs) {
+ return xfs_write_zeroes(s, aiocb->aio_offset, aiocb->aio_nbytes);
+ }
+#endif
+
+ s->has_write_zeroes = false;
+ return ret;
+}
+
static ssize_t handle_aiocb_discard(RawPosixAIOData *aiocb)
{
int ret = -EOPNOTSUPP;
--
1.9.1
next prev parent reply other threads:[~2015-01-27 13:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-27 13:51 [Qemu-devel] [PATCH v4 0/7] eliminate data write in bdrv_write_zeroes on Linux in raw-posix.c Denis V. Lunev
2015-01-27 13:51 ` [Qemu-devel] [PATCH 1/7] block/raw-posix: create translate_err helper to merge errno values Denis V. Lunev
2015-01-27 16:50 ` Max Reitz
2015-01-27 13:51 ` [Qemu-devel] [PATCH 2/7] block/raw-posix: create do_fallocate helper Denis V. Lunev
2015-01-27 16:57 ` Max Reitz
2015-01-27 13:51 ` Denis V. Lunev [this message]
2015-01-27 17:13 ` [Qemu-devel] [PATCH 3/7] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Max Reitz
2015-01-27 13:51 ` [Qemu-devel] [PATCH 4/7] block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroes Denis V. Lunev
2015-01-27 17:30 ` Max Reitz
2015-01-27 13:51 ` [Qemu-devel] [PATCH 5/7] block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroes Denis V. Lunev
2015-01-27 17:48 ` Max Reitz
2015-01-27 13:51 ` [Qemu-devel] [PATCH 6/7] block/raw-posix: call plain fallocate in handle_aiocb_write_zeroes Denis V. Lunev
2015-01-27 17:57 ` Max Reitz
2015-01-27 18:19 ` Denis V. Lunev
2015-01-27 18:24 ` Max Reitz
2015-01-27 18:33 ` Denis V. Lunev
2015-01-27 13:51 ` [Qemu-devel] [PATCH 7/7] block/raw-posix: set max_write_zeroes to INT_MAX for regular files Denis V. Lunev
2015-01-27 18:05 ` Max Reitz
2015-01-27 18:11 ` Denis V. Lunev
2015-01-28 6:39 ` Denis V. Lunev
-- strict thread matches above, loose matches on Subject: below --
2015-01-28 18:38 [Qemu-devel] [PATCH v5 0/7] eliminate data write in bdrv_write_zeroes on Linux in raw-posix.c Denis V. Lunev
2015-01-28 18:38 ` [Qemu-devel] [PATCH 3/7] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Denis V. Lunev
2015-01-30 8:42 [Qemu-devel] [PATCH v6 0/7] eliminate data write in bdrv_write_zeroes on Linux in raw-posix.c Denis V. Lunev
2015-01-30 8:42 ` [Qemu-devel] [PATCH 3/7] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Denis V. Lunev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422366699-17473-4-git-send-email-den@openvz.org \
--to=den@openvz.org \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=pl@kamp.de \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).