[Qemu-devel] [PATCH 05/19] libqos/ahci: Add ahci_port_check_error helper

[John Snow <jsnow@redhat.com>]

ahci_port_check_error checks a given port's error registers and asserts
that everything from the port-level view is still OK.

Signed-off-by: John Snow <jsnow@redhat.com>
---
 tests/ahci-test.c   |  8 +-------
 tests/libqos/ahci.c | 22 ++++++++++++++++++++++
 tests/libqos/ahci.h |  1 +
 3 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 17aee37..63ecf73 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -747,6 +747,7 @@ static void ahci_test_identify(AHCIQState *ahci)
     while (BITSET(ahci_px_rreg(ahci, i, AHCI_PX_TFD), AHCI_PX_TFD_STS_BSY)) {
         usleep(50);
     }
+    ahci_port_check_error(ahci, i);
 
     /* Check for expected interrupts */
     reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
@@ -760,13 +761,6 @@ static void ahci_test_identify(AHCIQState *ahci)
                  AHCI_PX_IS_DHRS | AHCI_PX_IS_PSS | AHCI_PX_IS_DPS);
     g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
 
-    /* Check for errors. */
-    reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
-    g_assert_cmphex(reg, ==, 0);
-    reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
-    ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
-    ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
-
     /* Investigate the CMD, assert that we read 512 bytes */
     ahci_get_command_header(ahci, i, cx, &cmd);
     g_assert_cmphex(512, ==, cmd.prdbc);
diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c
index f5e8864..35de9af 100644
--- a/tests/libqos/ahci.c
+++ b/tests/libqos/ahci.c
@@ -311,6 +311,28 @@ void ahci_port_clear(AHCIQState *ahci, uint8_t px)
     qmemset(ahci->port[px].fb, 0x00, 0x100);
 }
 
+/**
+ * Check a port for errors.
+ */
+void ahci_port_check_error(AHCIQState *ahci, uint8_t px)
+{
+    uint32_t reg;
+
+    /* The upper 9 bits of the IS register all indicate errors. */
+    reg = ahci_px_rreg(ahci, px, AHCI_PX_IS);
+    reg >>= 23;
+    g_assert_cmphex(reg, ==, 0);
+
+    /* The Sata Error Register should be empty. */
+    reg = ahci_px_rreg(ahci, px, AHCI_PX_SERR);
+    g_assert_cmphex(reg, ==, 0);
+
+    /* The TFD also has two error sections. */
+    reg = ahci_px_rreg(ahci, px, AHCI_PX_TFD);
+    ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
+    ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
+}
+
 /* Get the #cx'th command of port #px. */
 void ahci_get_command_header(AHCIQState *ahci, uint8_t px,
                              uint8_t cx, AHCICommandHeader *cmd)
diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h
index d27e75f..b384cbc 100644
--- a/tests/libqos/ahci.h
+++ b/tests/libqos/ahci.h
@@ -433,6 +433,7 @@ void start_ahci_device(AHCIQState *ahci);
 void ahci_hba_enable(AHCIQState *ahci);
 unsigned ahci_port_select(AHCIQState *ahci);
 void ahci_port_clear(AHCIQState *ahci, uint8_t px);
+void ahci_port_check_error(AHCIQState *ahci, uint8_t px);
 void ahci_get_command_header(AHCIQState *ahci, uint8_t px,
                              uint8_t cx, AHCICommandHeader *cmd);
 void ahci_set_command_header(AHCIQState *ahci, uint8_t px,
-- 
1.9.3