From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>,
"Leon Alrae" <leon.alrae@imgtec.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v2 6/7] gt64xxx: remove isa_mem_base usage
Date: Sun, 1 Feb 2015 09:12:55 +0100 [thread overview]
Message-ID: <1422778376-32141-7-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1422778376-32141-1-git-send-email-hpoussin@reactos.org>
Create a custom address space for PCI memory region and use it for the PCI bus.
Dynamically handle PCI0 Mem0 and PCI0 Mem1 regions, as already done for PCI0 IO.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
hw/mips/gt64xxx_pci.c | 95 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 68 insertions(+), 27 deletions(-)
diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
index 1f2fe5f..10fcca3 100644
--- a/hw/mips/gt64xxx_pci.c
+++ b/hw/mips/gt64xxx_pci.c
@@ -239,7 +239,11 @@ typedef struct GT64120State {
uint32_t regs[GT_REGS];
PCI_MAPPING_ENTRY(PCI0IO);
+ PCI_MAPPING_ENTRY(PCI0M0);
+ PCI_MAPPING_ENTRY(PCI0M1);
PCI_MAPPING_ENTRY(ISD);
+ MemoryRegion pci0_mem;
+ AddressSpace pci0_mem_as;
} GT64120State;
/* Adjust range to avoid touching space which isn't mappable via PCI */
@@ -290,25 +294,63 @@ static void gt64120_isd_mapping(GT64120State *s)
static void gt64120_pci_mapping(GT64120State *s)
{
- /* Update IO mapping */
- if ((s->regs[GT_PCI0IOLD] & 0x7f) <= s->regs[GT_PCI0IOHD])
- {
- /* Unmap old IO address */
- if (s->PCI0IO_length)
- {
- memory_region_del_subregion(get_system_memory(), &s->PCI0IO_mem);
- object_unparent(OBJECT(&s->PCI0IO_mem));
- }
- /* Map new IO address */
- s->PCI0IO_start = s->regs[GT_PCI0IOLD] << 21;
- s->PCI0IO_length = ((s->regs[GT_PCI0IOHD] + 1) - (s->regs[GT_PCI0IOLD] & 0x7f)) << 21;
- isa_mem_base = s->PCI0IO_start;
- if (s->PCI0IO_length) {
- memory_region_init_alias(&s->PCI0IO_mem, OBJECT(s), "isa_mmio",
- get_system_io(), 0, s->PCI0IO_length);
- memory_region_add_subregion(get_system_memory(), s->PCI0IO_start,
- &s->PCI0IO_mem);
- }
+ /* Update PCI0IO mapping */
+ if ((s->regs[GT_PCI0IOLD] & 0x7f) <= s->regs[GT_PCI0IOHD]) {
+ /* Unmap old IO address */
+ if (s->PCI0IO_length) {
+ memory_region_del_subregion(get_system_memory(), &s->PCI0IO_mem);
+ object_unparent(OBJECT(&s->PCI0IO_mem));
+ }
+ /* Map new IO address */
+ s->PCI0IO_start = s->regs[GT_PCI0IOLD] << 21;
+ s->PCI0IO_length = ((s->regs[GT_PCI0IOHD] + 1) -
+ (s->regs[GT_PCI0IOLD] & 0x7f)) << 21;
+ if (s->PCI0IO_length) {
+ memory_region_init_alias(&s->PCI0IO_mem, OBJECT(s), "pci0-io",
+ get_system_io(), 0, s->PCI0IO_length);
+ memory_region_add_subregion(get_system_memory(), s->PCI0IO_start,
+ &s->PCI0IO_mem);
+ }
+ }
+
+ /* Update PCI0M0 mapping */
+ if ((s->regs[GT_PCI0M0LD] & 0x7f) <= s->regs[GT_PCI0M0HD]) {
+ /* Unmap old MEM address */
+ if (s->PCI0M0_length) {
+ memory_region_del_subregion(get_system_memory(), &s->PCI0M0_mem);
+ object_unparent(OBJECT(&s->PCI0M0_mem));
+ }
+ /* Map new mem address */
+ s->PCI0M0_start = s->regs[GT_PCI0M0LD] << 21;
+ s->PCI0M0_length = ((s->regs[GT_PCI0M0HD] + 1) -
+ (s->regs[GT_PCI0M0LD] & 0x7f)) << 21;
+ if (s->PCI0M0_length) {
+ memory_region_init_alias(&s->PCI0M0_mem, OBJECT(s), "pci0-mem0",
+ &s->pci0_mem, s->PCI0M0_start,
+ s->PCI0M0_length);
+ memory_region_add_subregion(get_system_memory(), s->PCI0M0_start,
+ &s->PCI0M0_mem);
+ }
+ }
+
+ /* Update PCI0M1 mapping */
+ if ((s->regs[GT_PCI0M1LD] & 0x7f) <= s->regs[GT_PCI0M1HD]) {
+ /* Unmap old MEM address */
+ if (s->PCI0M1_length) {
+ memory_region_del_subregion(get_system_memory(), &s->PCI0M1_mem);
+ object_unparent(OBJECT(&s->PCI0M1_mem));
+ }
+ /* Map new mem address */
+ s->PCI0M1_start = s->regs[GT_PCI0M1LD] << 21;
+ s->PCI0M1_length = ((s->regs[GT_PCI0M1HD] + 1) -
+ (s->regs[GT_PCI0M1LD] & 0x7f)) << 21;
+ if (s->PCI0M1_length) {
+ memory_region_init_alias(&s->PCI0M1_mem, OBJECT(s), "pci0-mem1",
+ &s->pci0_mem, s->PCI0M1_start,
+ s->PCI0M1_length);
+ memory_region_add_subregion(get_system_memory(), s->PCI0M1_start,
+ &s->PCI0M1_mem);
+ }
}
}
@@ -363,10 +405,12 @@ static void gt64120_writel (void *opaque, hwaddr addr,
case GT_PCI0M0LD:
s->regs[GT_PCI0M0LD] = val & 0x00007fff;
s->regs[GT_PCI0M0REMAP] = val & 0x000007ff;
+ gt64120_pci_mapping(s);
break;
case GT_PCI0M1LD:
s->regs[GT_PCI0M1LD] = val & 0x00007fff;
s->regs[GT_PCI0M1REMAP] = val & 0x000007ff;
+ gt64120_pci_mapping(s);
break;
case GT_PCI1IOLD:
s->regs[GT_PCI1IOLD] = val & 0x00007fff;
@@ -380,12 +424,12 @@ static void gt64120_writel (void *opaque, hwaddr addr,
s->regs[GT_PCI1M1LD] = val & 0x00007fff;
s->regs[GT_PCI1M1REMAP] = val & 0x000007ff;
break;
+ case GT_PCI0M0HD:
+ case GT_PCI0M1HD:
case GT_PCI0IOHD:
s->regs[saddr] = val & 0x0000007f;
gt64120_pci_mapping(s);
break;
- case GT_PCI0M0HD:
- case GT_PCI0M1HD:
case GT_PCI1IOHD:
case GT_PCI1M0HD:
case GT_PCI1M1HD:
@@ -1124,10 +1168,12 @@ PCIBus *gt64120_register(qemu_irq *pic)
qdev_init_nofail(dev);
d = GT64120_PCI_HOST_BRIDGE(dev);
phb = PCI_HOST_BRIDGE(dev);
+ memory_region_init(&d->pci0_mem, OBJECT(dev), "pci0-mem", UINT32_MAX);
+ address_space_init(&d->pci0_mem_as, &d->pci0_mem, "pci0-mem");
phb->bus = pci_register_bus(dev, "pci",
gt64120_pci_set_irq, gt64120_pci_map_irq,
pic,
- get_system_memory(),
+ &d->pci0_mem,
get_system_io(),
PCI_DEVFN(18, 0), 4, TYPE_PCI_BUS);
memory_region_init_io(&d->ISD_mem, OBJECT(dev), &isd_mem_ops, d, "isd-mem", 0x1000);
@@ -1142,11 +1188,6 @@ static int gt64120_init(SysBusDevice *dev)
s = GT64120_PCI_HOST_BRIDGE(dev);
- /* FIXME: This value is computed from registers during reset, but some
- devices (e.g. VGA card) need to know it when they are registered.
- This also mean that changing the register to change the mapping
- does not fully work. */
- isa_mem_base = 0x10000000;
qemu_register_reset(gt64120_reset, s);
return 0;
}
--
1.7.10.4
next prev parent reply other threads:[~2015-02-01 8:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-01 8:12 [Qemu-devel] [PATCH v2 0/7] isa: remove isa_mem_base variable Hervé Poussineau
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 1/7] isa: add memory space parameter to isa_bus_new Hervé Poussineau
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 2/7] jazz: do not explode QEMUMachineInitArgs structure Hervé Poussineau
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 3/7] jazz: remove usage of isa_mem_base Hervé Poussineau
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 4/7] mips: remove isa_mem_base usage Hervé Poussineau
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 5/7] piix4: use PCI address space instead of system memory Hervé Poussineau
2015-02-01 8:12 ` Hervé Poussineau [this message]
2015-02-01 8:12 ` [Qemu-devel] [PATCH v2 7/7] isa: remove isa_mem_base variable Hervé Poussineau
2015-02-01 18:05 ` [Qemu-devel] [PATCH v2 0/7] " Mark Cave-Ayland
2015-02-09 9:16 ` Leon Alrae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422778376-32141-7-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=aurelien@aurel32.net \
--cc=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).