qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 27/42] block/dmg: fix sector data offset calculation
Date: Fri,  6 Feb 2015 17:40:34 +0100	[thread overview]
Message-ID: <1423240849-15499-28-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1423240849-15499-1-git-send-email-kwolf@redhat.com>

From: Peter Wu <peter@lekensteyn.nl>

This patch addresses two issues:

 - The data fork offset was not taken into account, resulting in failure
   to read an InstallESD.dmg file (5164763151 bytes) which had a
   non-zero DataForkOffset field.
 - The offset of the previous block ("partition") was unconditionally
   added to the current block because older files would start the input
   offset of a new block at zero. Newer files (including vlc-2.1.5.dmg,
   tuxpaint-0.9.15-macosx.dmg and OS X Yosemite [MAS].dmg) failed in
   reads because these files have chunk offsets, relative to the begin
   of a data fork.

Now the data offset of the mish is taken into account. While we could
check that the data_offset is within the data fork, let's not do that
here as it would only result in parse failures on invalid files (rather
than gracefully handling such bad files). dmg_read will error out if
the offset is incorrect.

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1420566495-13284-9-git-send-email-peter@lekensteyn.nl
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/dmg.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/block/dmg.c b/block/dmg.c
index a33c131..34dc632 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -186,7 +186,7 @@ static int64_t dmg_find_koly_offset(BlockDriverState *file_bs, Error **errp)
 typedef struct DmgHeaderState {
     /* used internally by dmg_read_mish_block to remember offsets of blocks
      * across calls */
-    uint64_t last_in_offset;
+    uint64_t data_fork_offset;
     uint64_t last_out_offset;
     /* exported for dmg_open */
     uint32_t max_compressed_size;
@@ -201,6 +201,8 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
     size_t new_size;
     uint32_t chunk_count;
     int64_t offset = 0;
+    uint64_t data_offset;
+    uint64_t in_offset = ds->data_fork_offset;
 
     type = buff_read_uint32(buffer, offset);
     /* skip data that is not a valid MISH block (invalid magic or too small) */
@@ -209,8 +211,12 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
         return 0;
     }
 
-    offset += 4;
-    offset += 200;
+    /* location in data fork for (compressed) blob (in bytes) */
+    data_offset = buff_read_uint64(buffer, offset + 0x18);
+    in_offset += data_offset;
+
+    /* move to begin of chunk entries */
+    offset += 204;
 
     chunk_count = (count - 204) / 40;
     new_size = sizeof(uint64_t) * (s->n_chunks + chunk_count);
@@ -226,7 +232,6 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
         if (s->types[i] != 0x80000005 && s->types[i] != 1 &&
             s->types[i] != 2) {
             if (s->types[i] == 0xffffffff && i > 0) {
-                ds->last_in_offset = s->offsets[i - 1] + s->lengths[i - 1];
                 ds->last_out_offset = s->sectors[i - 1] +
                                       s->sectorcounts[i - 1];
             }
@@ -253,7 +258,7 @@ static int dmg_read_mish_block(BDRVDMGState *s, DmgHeaderState *ds,
         }
 
         s->offsets[i] = buff_read_uint64(buffer, offset);
-        s->offsets[i] += ds->last_in_offset;
+        s->offsets[i] += in_offset;
         offset += 8;
 
         s->lengths[i] = buff_read_uint64(buffer, offset);
@@ -412,7 +417,7 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
     s->n_chunks = 0;
     s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
     /* used by dmg_read_mish_block to keep track of the current I/O position */
-    ds.last_in_offset = 0;
+    ds.data_fork_offset = 0;
     ds.last_out_offset = 0;
     ds.max_compressed_size = 1;
     ds.max_sectors_per_chunk = 1;
@@ -424,6 +429,15 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
         goto fail;
     }
 
+    /* offset of data fork (DataForkOffset) */
+    ret = read_uint64(bs, offset + 0x18, &ds.data_fork_offset);
+    if (ret < 0) {
+        goto fail;
+    } else if (ds.data_fork_offset > offset) {
+        ret = -EINVAL;
+        goto fail;
+    }
+
     /* offset of resource fork (RsrcForkOffset) */
     ret = read_uint64(bs, offset + 0x28, &rsrc_fork_offset);
     if (ret < 0) {
-- 
1.8.3.1

  parent reply	other threads:[~2015-02-06 16:41 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-06 16:40 [Qemu-devel] [PULL 00/42] Block patches Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 01/42] Restore atapi_dma flag across migration Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 02/42] atapi migration: Throw recoverable error to avoid recovery Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 03/42] block/raw-posix: create translate_err helper to merge errno values Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 04/42] block/raw-posix: create do_fallocate helper Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 05/42] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Kevin Wolf
2015-02-12  2:29   ` Peter Maydell
2015-02-12  4:44     ` Denis V. Lunev
2015-02-06 16:40 ` [Qemu-devel] [PULL 06/42] block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 07/42] block/raw-posix: call plain fallocate " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 08/42] block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 09/42] block: change default for discard and write zeroes to INT_MAX Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 10/42] qemu-img: Add QEMU_PKGVERSION to QEMU_IMG_VERSION Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 11/42] qed: Really remove unused field QEDAIOCB.finished Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 12/42] block: add accounting for merged requests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 13/42] hw/virtio-blk: add a constant for max number of " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 14/42] block-backend: expose bs->bl.max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 15/42] virtio-blk: introduce multiread Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 16/42] virtio-blk: add a knob to disable request merging Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 17/42] qemu-iotests: Fix supported_oses check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 18/42] iotests: Specify format for qemu-nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 19/42] block: add event when disk usage exceeds threshold Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 20/42] block/dmg: properly detect the UDIF trailer Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 21/42] block/dmg: extract mish block decoding functionality Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 22/42] block/dmg: extract processing of resource forks Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 23/42] block/dmg: process a buffer instead of reading ints Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 24/42] block/dmg: validate chunk size to avoid overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 25/42] block/dmg: process XML plists Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 26/42] block/dmg: set virtual size to a non-zero value Kevin Wolf
2015-02-06 16:40 ` Kevin Wolf [this message]
2015-02-06 16:40 ` [Qemu-devel] [PULL 28/42] block/dmg: use SectorNumber from BLKX header Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 29/42] block/dmg: factor out block type check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 30/42] block/dmg: support bzip2 block entry types Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 31/42] block/dmg: improve zeroes handling Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 32/42] qed: check for header size overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 33/42] qemu-iotests: add 116 invalid QED input file tests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 34/42] block: fix off-by-one error in qcow and qcow2 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 35/42] iotests: Fix 083 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 36/42] iotests: Fix 100 for nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 37/42] iotests: Fix 104 for NBD Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 38/42] nbd: Improve error messages Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 39/42] block: introduce BDRV_REQUEST_MAX_SECTORS Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 40/42] nbd: fix max_discard/max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 41/42] block: Give always priority to unused entries in the qcow2 L2 cache Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 42/42] qcow2: Rewrite qcow2_alloc_bytes() Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1423240849-15499-28-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).