From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 39/42] block: introduce BDRV_REQUEST_MAX_SECTORS
Date: Fri, 6 Feb 2015 17:40:46 +0100 [thread overview]
Message-ID: <1423240849-15499-40-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1423240849-15499-1-git-send-email-kwolf@redhat.com>
From: Peter Lieven <pl@kamp.de>
we check and adjust request sizes at several places with
sometimes inconsistent checks or default values:
INT_MAX
INT_MAX >> BDRV_SECTOR_BITS
UINT_MAX >> BDRV_SECTOR_BITS
SIZE_MAX >> BDRV_SECTOR_BITS
This patches introdocues a macro for the maximal allowed sectors
per request and uses it at several places.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 21 +++++++++------------
hw/block/virtio-blk.c | 4 ++--
include/block/block.h | 3 +++
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/block.c b/block.c
index 8272ef9..49e0073 100644
--- a/block.c
+++ b/block.c
@@ -2647,7 +2647,7 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
{
int64_t len;
- if (size > INT_MAX) {
+ if (size > BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) {
return -EIO;
}
@@ -2671,7 +2671,7 @@ static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
int nb_sectors)
{
- if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EIO;
}
@@ -2758,7 +2758,7 @@ static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
.iov_len = nb_sectors * BDRV_SECTOR_SIZE,
};
- if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -2826,13 +2826,10 @@ int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
}
for (;;) {
- nb_sectors = target_sectors - sector_num;
+ nb_sectors = MIN(target_sectors - sector_num, BDRV_REQUEST_MAX_SECTORS);
if (nb_sectors <= 0) {
return 0;
}
- if (nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
- nb_sectors = INT_MAX / BDRV_SECTOR_SIZE;
- }
ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
if (ret < 0) {
error_report("error getting block status at sector %" PRId64 ": %s",
@@ -3167,7 +3164,7 @@ static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
- if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -3202,8 +3199,8 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
struct iovec iov = {0};
int ret = 0;
- int max_write_zeroes = bs->bl.max_write_zeroes ?
- bs->bl.max_write_zeroes : INT_MAX;
+ int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes,
+ BDRV_REQUEST_MAX_SECTORS);
while (nb_sectors > 0 && !ret) {
int num = nb_sectors;
@@ -3458,7 +3455,7 @@ static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
- if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
+ if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return -EINVAL;
}
@@ -5120,7 +5117,7 @@ int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
return 0;
}
- max_discard = bs->bl.max_discard ? bs->bl.max_discard : INT_MAX;
+ max_discard = MIN_NON_ZERO(bs->bl.max_discard, BDRV_REQUEST_MAX_SECTORS);
while (nb_sectors > 0) {
int ret;
int num = nb_sectors;
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 8c51a29..1a8a176 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -381,7 +381,7 @@ void virtio_blk_submit_multireq(BlockBackend *blk, MultiReqBuffer *mrb)
}
max_xfer_len = blk_get_max_transfer_length(mrb->reqs[0]->dev->blk);
- max_xfer_len = MIN_NON_ZERO(max_xfer_len, INT_MAX);
+ max_xfer_len = MIN_NON_ZERO(max_xfer_len, BDRV_REQUEST_MAX_SECTORS);
qsort(mrb->reqs, mrb->num_reqs, sizeof(*mrb->reqs),
&multireq_compare);
@@ -447,7 +447,7 @@ static bool virtio_blk_sect_range_ok(VirtIOBlock *dev,
uint64_t nb_sectors = size >> BDRV_SECTOR_BITS;
uint64_t total_sectors;
- if (nb_sectors > INT_MAX) {
+ if (nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
return false;
}
if (sector & dev->sector_mask) {
diff --git a/include/block/block.h b/include/block/block.h
index 3082d2b..25a6d62 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -83,6 +83,9 @@ typedef enum {
#define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS)
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
+#define BDRV_REQUEST_MAX_SECTORS MIN(SIZE_MAX >> BDRV_SECTOR_BITS, \
+ INT_MAX >> BDRV_SECTOR_BITS)
+
/*
* Allocation status flags
* BDRV_BLOCK_DATA: data is read from bs->file or another file
--
1.8.3.1
next prev parent reply other threads:[~2015-02-06 16:41 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 16:40 [Qemu-devel] [PULL 00/42] Block patches Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 01/42] Restore atapi_dma flag across migration Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 02/42] atapi migration: Throw recoverable error to avoid recovery Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 03/42] block/raw-posix: create translate_err helper to merge errno values Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 04/42] block/raw-posix: create do_fallocate helper Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 05/42] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Kevin Wolf
2015-02-12 2:29 ` Peter Maydell
2015-02-12 4:44 ` Denis V. Lunev
2015-02-06 16:40 ` [Qemu-devel] [PULL 06/42] block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 07/42] block/raw-posix: call plain fallocate " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 08/42] block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 09/42] block: change default for discard and write zeroes to INT_MAX Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 10/42] qemu-img: Add QEMU_PKGVERSION to QEMU_IMG_VERSION Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 11/42] qed: Really remove unused field QEDAIOCB.finished Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 12/42] block: add accounting for merged requests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 13/42] hw/virtio-blk: add a constant for max number of " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 14/42] block-backend: expose bs->bl.max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 15/42] virtio-blk: introduce multiread Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 16/42] virtio-blk: add a knob to disable request merging Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 17/42] qemu-iotests: Fix supported_oses check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 18/42] iotests: Specify format for qemu-nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 19/42] block: add event when disk usage exceeds threshold Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 20/42] block/dmg: properly detect the UDIF trailer Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 21/42] block/dmg: extract mish block decoding functionality Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 22/42] block/dmg: extract processing of resource forks Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 23/42] block/dmg: process a buffer instead of reading ints Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 24/42] block/dmg: validate chunk size to avoid overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 25/42] block/dmg: process XML plists Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 26/42] block/dmg: set virtual size to a non-zero value Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 27/42] block/dmg: fix sector data offset calculation Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 28/42] block/dmg: use SectorNumber from BLKX header Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 29/42] block/dmg: factor out block type check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 30/42] block/dmg: support bzip2 block entry types Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 31/42] block/dmg: improve zeroes handling Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 32/42] qed: check for header size overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 33/42] qemu-iotests: add 116 invalid QED input file tests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 34/42] block: fix off-by-one error in qcow and qcow2 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 35/42] iotests: Fix 083 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 36/42] iotests: Fix 100 for nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 37/42] iotests: Fix 104 for NBD Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 38/42] nbd: Improve error messages Kevin Wolf
2015-02-06 16:40 ` Kevin Wolf [this message]
2015-02-06 16:40 ` [Qemu-devel] [PULL 40/42] nbd: fix max_discard/max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 41/42] block: Give always priority to unused entries in the qcow2 L2 cache Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 42/42] qcow2: Rewrite qcow2_alloc_bytes() Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423240849-15499-40-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).