From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 06/42] block: use fallocate(FALLOC_FL_ZERO_RANGE) in handle_aiocb_write_zeroes
Date: Fri, 6 Feb 2015 17:40:13 +0100 [thread overview]
Message-ID: <1423240849-15499-7-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1423240849-15499-1-git-send-email-kwolf@redhat.com>
From: "Denis V. Lunev" <den@openvz.org>
This efficiently writes zeroes on Linux if the kernel is capable enough.
FALLOC_FL_ZERO_RANGE correctly handles all cases, including and not
including file expansion.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/raw-posix.c | 15 +++++++++++++--
configure | 19 +++++++++++++++++++
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index d3910fd..5a777e7 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -60,7 +60,7 @@
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
#endif
#endif
-#ifdef CONFIG_FALLOCATE_PUNCH_HOLE
+#if defined(CONFIG_FALLOCATE_PUNCH_HOLE) || defined(CONFIG_FALLOCATE_ZERO_RANGE)
#include <linux/falloc.h>
#endif
#if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
@@ -902,7 +902,7 @@ static int translate_err(int err)
return err;
}
-#if defined(CONFIG_FALLOCATE_PUNCH_HOLE)
+#if defined(CONFIG_FALLOCATE_PUNCH_HOLE) || defined(CONFIG_FALLOCATE_ZERO_RANGE)
static int do_fallocate(int fd, int mode, off_t offset, off_t len)
{
do {
@@ -954,6 +954,17 @@ static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
}
#endif
+#ifdef CONFIG_FALLOCATE_ZERO_RANGE
+ if (s->has_write_zeroes) {
+ int ret = do_fallocate(s->fd, FALLOC_FL_ZERO_RANGE,
+ aiocb->aio_offset, aiocb->aio_nbytes);
+ if (ret == 0 || ret != -ENOTSUP) {
+ return ret;
+ }
+ s->has_write_zeroes = false;
+ }
+#endif
+
return -ENOTSUP;
}
diff --git a/configure b/configure
index f185dd0..e00e03a 100755
--- a/configure
+++ b/configure
@@ -3335,6 +3335,22 @@ if compile_prog "" "" ; then
fallocate_punch_hole=yes
fi
+# check that fallocate supports range zeroing inside the file
+fallocate_zero_range=no
+cat > $TMPC << EOF
+#include <fcntl.h>
+#include <linux/falloc.h>
+
+int main(void)
+{
+ fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
+ return 0;
+}
+EOF
+if compile_prog "" "" ; then
+ fallocate_zero_range=yes
+fi
+
# check for posix_fallocate
posix_fallocate=no
cat > $TMPC << EOF
@@ -4567,6 +4583,9 @@ fi
if test "$fallocate_punch_hole" = "yes" ; then
echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
fi
+if test "$fallocate_zero_range" = "yes" ; then
+ echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
+fi
if test "$posix_fallocate" = "yes" ; then
echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
fi
--
1.8.3.1
next prev parent reply other threads:[~2015-02-06 16:41 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-06 16:40 [Qemu-devel] [PULL 00/42] Block patches Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 01/42] Restore atapi_dma flag across migration Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 02/42] atapi migration: Throw recoverable error to avoid recovery Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 03/42] block/raw-posix: create translate_err helper to merge errno values Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 04/42] block/raw-posix: create do_fallocate helper Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 05/42] block/raw-posix: refactor handle_aiocb_write_zeroes a bit Kevin Wolf
2015-02-12 2:29 ` Peter Maydell
2015-02-12 4:44 ` Denis V. Lunev
2015-02-06 16:40 ` Kevin Wolf [this message]
2015-02-06 16:40 ` [Qemu-devel] [PULL 07/42] block/raw-posix: call plain fallocate in handle_aiocb_write_zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 08/42] block: use fallocate(FALLOC_FL_PUNCH_HOLE) & fallocate(0) to write zeroes Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 09/42] block: change default for discard and write zeroes to INT_MAX Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 10/42] qemu-img: Add QEMU_PKGVERSION to QEMU_IMG_VERSION Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 11/42] qed: Really remove unused field QEDAIOCB.finished Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 12/42] block: add accounting for merged requests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 13/42] hw/virtio-blk: add a constant for max number of " Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 14/42] block-backend: expose bs->bl.max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 15/42] virtio-blk: introduce multiread Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 16/42] virtio-blk: add a knob to disable request merging Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 17/42] qemu-iotests: Fix supported_oses check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 18/42] iotests: Specify format for qemu-nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 19/42] block: add event when disk usage exceeds threshold Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 20/42] block/dmg: properly detect the UDIF trailer Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 21/42] block/dmg: extract mish block decoding functionality Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 22/42] block/dmg: extract processing of resource forks Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 23/42] block/dmg: process a buffer instead of reading ints Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 24/42] block/dmg: validate chunk size to avoid overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 25/42] block/dmg: process XML plists Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 26/42] block/dmg: set virtual size to a non-zero value Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 27/42] block/dmg: fix sector data offset calculation Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 28/42] block/dmg: use SectorNumber from BLKX header Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 29/42] block/dmg: factor out block type check Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 30/42] block/dmg: support bzip2 block entry types Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 31/42] block/dmg: improve zeroes handling Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 32/42] qed: check for header size overflow Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 33/42] qemu-iotests: add 116 invalid QED input file tests Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 34/42] block: fix off-by-one error in qcow and qcow2 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 35/42] iotests: Fix 083 Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 36/42] iotests: Fix 100 for nbd Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 37/42] iotests: Fix 104 for NBD Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 38/42] nbd: Improve error messages Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 39/42] block: introduce BDRV_REQUEST_MAX_SECTORS Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 40/42] nbd: fix max_discard/max_transfer_length Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 41/42] block: Give always priority to unused entries in the qcow2 L2 cache Kevin Wolf
2015-02-06 16:40 ` [Qemu-devel] [PULL 42/42] qcow2: Rewrite qcow2_alloc_bytes() Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423240849-15499-7-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).