From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, mst@redhat.com, armbru@redhat.com,
mreitz@redhat.com, stefanha@redhat.com, pbonzini@redhat.com,
John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v3 00/17] ide: rerror/werror migration fixes for IDE/ISA and AHCI
Date: Tue, 10 Feb 2015 13:19:12 -0500 [thread overview]
Message-ID: <1423592369-20197-1-git-send-email-jsnow@redhat.com> (raw)
This series fixes rerror/werror support for IDE/ISA and implements it in
a migratable way for AHCI. This series also fixes AHCI migration.
This series was written mostly by Paolo to unify the restart mechanics
of IDE/ISA and IDE/BMDMA, moving much of the restart logic into common
code.
Many of the earlier patches make more sense considering the end goal of
eliminating BMDMA specific restart code to be shared with ISA and AHCI
codepaths.
Migration for halted commands is fixed for ISA and AHCI.
As a consequence, operations halted via rerror=stop or werror=stop
should be able to be successfully migrated and resumed when using
ISA, PCI, or AHCI.
This series includes tests for ISA and PCI/BMDMA, but does not
yet include tests for AHCI, which require some more qtest work
to be upstreamed first. Regardless, the AHCI tests have been
written and can be observed at:
https://github.com/jnsnow/qemu/commits/ahci-devel
See "ahci: add migrate dma test" and "ahci-test: add flush migrate test"
for the WIP versions of the AHCI test that I used to exercise this
patchset.
V2:
- Rebased, including Dave Gilbert's ATAPI migration workaround
- Some rephrasing for the comment in patch #15
- Added assertion that the busy_slot variable is within range
John Snow (3):
ahci: Migrate IDEStatus
ahci: Recompute cur_cmd on migrate post load
qtest/ide: Test flush / retry for ISA and PCI
Paolo Bonzini (14):
ide: start extracting ide_restart_dma out of bmdma_restart_dma
ide: prepare to move restart to common code
ide: introduce ide_register_restart_cb
ide: do not use BMDMA in restart callback
ide: pass IDEBus to the restart_cb
ide: move restart callback to common code
ide: remove restart_cb callback
ide: replace set_unit callback with more IDEBus state
ide: place initial state of the current request to IDEBus
ide: migrate initial request state via IDEBus
ide: commonize io_buffer_index initialization
ide: make more functions static
ide: support PIO restart for the ISA controller
ahci: add support for restarting non-queued commands
hw/ide/ahci.c | 41 ++++++++++---------
hw/ide/atapi.c | 3 +-
hw/ide/cmd646.c | 3 +-
hw/ide/core.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++++------
hw/ide/internal.h | 16 +++++---
hw/ide/isa.c | 3 +-
hw/ide/macio.c | 6 ---
hw/ide/pci.c | 109 +++++++------------------------------------------
hw/ide/pci.h | 12 +++---
hw/ide/piix.c | 3 +-
hw/ide/via.c | 3 +-
tests/ide-test.c | 20 ++++++---
12 files changed, 178 insertions(+), 159 deletions(-)
--
1.9.3
next reply other threads:[~2015-02-10 18:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 18:19 John Snow [this message]
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 01/17] ide: start extracting ide_restart_dma out of bmdma_restart_dma John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 02/17] ide: prepare to move restart to common code John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 03/17] ide: introduce ide_register_restart_cb John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 04/17] ide: do not use BMDMA in restart callback John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 05/17] ide: pass IDEBus to the restart_cb John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 06/17] ide: move restart callback to common code John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 07/17] ide: remove restart_cb callback John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 08/17] ide: replace set_unit callback with more IDEBus state John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 09/17] ide: place initial state of the current request to IDEBus John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 10/17] ide: migrate initial request state via IDEBus John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 11/17] ide: commonize io_buffer_index initialization John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 12/17] ide: make more functions static John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 13/17] ide: support PIO restart for the ISA controller John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 14/17] ahci: Migrate IDEStatus John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 15/17] ahci: add support for restarting non-queued commands John Snow
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 16/17] ahci: Recompute cur_cmd on migrate post load John Snow
2015-02-23 14:56 ` Stefan Hajnoczi
2015-02-10 18:19 ` [Qemu-devel] [PATCH v3 17/17] qtest/ide: Test flush / retry for ISA and PCI John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423592369-20197-1-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=armbru@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).