From: Eric Auger <eric.auger@linaro.org>
To: eric.auger@st.com, eric.auger@linaro.org,
christoffer.dall@linaro.org, qemu-devel@nongnu.org,
alex.williamson@redhat.com, peter.maydell@linaro.org,
agraf@suse.de, b.reynal@virtualopensystems.com,
feng.wu@intel.com
Cc: kim.phillips@freescale.com, patches@linaro.org,
a.rigo@virtualopensystems.com, afaerber@suse.de,
Bharat.Bhushan@freescale.com, a.motakis@virtualopensystems.com,
pbonzini@redhat.com, kvmarm@lists.cs.columbia.edu
Subject: [Qemu-devel] [PATCH v10 7/7] hw/vfio/platform: add irqfd support
Date: Fri, 13 Feb 2015 03:47:12 +0000 [thread overview]
Message-ID: <1423799232-10816-8-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1423799232-10816-1-git-send-email-eric.auger@linaro.org>
This patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on
kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller
This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
it depends on host kernel KVM irqfd.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
v5 -> v6
- rely on kvm_irqfds_enabled() and kvm_resamplefds_enabled()
- guard KVM code with #ifdef CONFIG_KVM
v3 -> v4:
[Alvise Rigo]
Use of VFIO Platform driver v6 unmask/virqfd feature and removal
of resamplefd handler. Physical IRQ unmasking is now done in
VFIO driver.
v3:
[Eric Auger]
initial support with resamplefd handled on QEMU side since the
unmask was not supported on VFIO platform driver v5.
Conflicts:
hw/vfio/platform.c
---
hw/vfio/platform.c | 104 +++++++++++++++++++++++++++++++++++++++-
include/hw/vfio/vfio-platform.h | 1 +
trace-events | 2 +
3 files changed, 106 insertions(+), 1 deletion(-)
diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
index 30798d8..cadc824 100644
--- a/hw/vfio/platform.c
+++ b/hw/vfio/platform.c
@@ -26,6 +26,7 @@
#include "hw/sysbus.h"
#include "trace.h"
#include "hw/platform-bus.h"
+#include "sysemu/kvm.h"
static void vfio_intp_interrupt(VFIOINTp *intp);
typedef void (*eventfd_user_side_handler_t)(VFIOINTp *intp);
@@ -237,6 +238,83 @@ static int vfio_start_eventfd_injection(VFIOINTp *intp)
}
/*
+ * Functions used for irqfd
+ */
+
+#ifdef CONFIG_KVM
+
+/**
+ * vfio_set_resample_eventfd - sets the resamplefd for an IRQ
+ * @intp: the IRQ struct pointer
+ * programs the VFIO driver to unmask this IRQ when the
+ * intp->unmask eventfd is triggered
+ */
+static int vfio_set_resample_eventfd(VFIOINTp *intp)
+{
+ VFIODevice *vbasedev = &intp->vdev->vbasedev;
+ struct vfio_irq_set *irq_set;
+ int argsz, ret;
+ int32_t *pfd;
+
+ argsz = sizeof(*irq_set) + sizeof(*pfd);
+ irq_set = g_malloc0(argsz);
+ irq_set->argsz = argsz;
+ irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_UNMASK;
+ irq_set->index = intp->pin;
+ irq_set->start = 0;
+ irq_set->count = 1;
+ pfd = (int32_t *)&irq_set->data;
+ *pfd = event_notifier_get_fd(&intp->unmask);
+ qemu_set_fd_handler(*pfd, NULL, NULL, intp);
+ ret = ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
+ g_free(irq_set);
+ if (ret < 0) {
+ error_report("vfio: Failed to set resample eventfd: %m");
+ qemu_set_fd_handler(*pfd, NULL, NULL, NULL);
+ }
+ return ret;
+}
+
+/**
+ * vfio_start_irqfd_injection - starts irqfd injection for an IRQ
+ * programs VFIO driver with both the trigger and resamplefd
+ * programs KVM with the gsi, trigger & resample eventfds
+ */
+static int vfio_start_irqfd_injection(VFIOINTp *intp)
+{
+ struct kvm_irqfd irqfd = {
+ .fd = event_notifier_get_fd(&intp->interrupt),
+ .resamplefd = event_notifier_get_fd(&intp->unmask),
+ .gsi = intp->virtualID,
+ .flags = KVM_IRQFD_FLAG_RESAMPLE,
+ };
+
+ if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
+ error_report("vfio: Error: Failed to assign the irqfd: %m");
+ goto fail_irqfd;
+ }
+ if (vfio_set_trigger_eventfd(intp, NULL) < 0) {
+ goto fail_vfio;
+ }
+ if (vfio_set_resample_eventfd(intp) < 0) {
+ goto fail_vfio;
+ }
+
+ intp->kvm_accel = true;
+ trace_vfio_platform_start_irqfd_injection(intp->pin, intp->virtualID,
+ irqfd.fd, irqfd.resamplefd);
+ return 0;
+
+fail_vfio:
+ irqfd.flags = KVM_IRQFD_FLAG_DEASSIGN;
+ kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd);
+fail_irqfd:
+ return -1;
+}
+
+#endif
+
+/*
* Functions used whatever the injection method
*/
@@ -315,6 +393,13 @@ static VFIOINTp *vfio_init_intp(VFIODevice *vbasedev, unsigned int index)
error_report("vfio: Error: trigger event_notifier_init failed ");
return NULL;
}
+ /* Get an eventfd for resample/unmask */
+ ret = event_notifier_init(&intp->unmask, 0);
+ if (ret) {
+ g_free(intp);
+ error_report("vfio: Error: resample event_notifier_init failed eoi");
+ return NULL;
+ }
/* store the new intp in qlist */
QLIST_INSERT_HEAD(&vdev->intp_list, intp, next);
@@ -409,7 +494,6 @@ static VFIODeviceOps vfio_platform_ops = {
.vfio_compute_needs_reset = vfio_platform_compute_needs_reset,
.vfio_hot_reset_multi = vfio_platform_hot_reset_multi,
.vfio_eoi = vfio_platform_eoi,
- .vfio_populate_device = vfio_populate_device,
};
/**
@@ -481,6 +565,13 @@ static int vfio_base_device_init(VFIODevice *vbasedev)
error_report("vfio: failed to get device %s", path);
vfio_put_group(group);
}
+
+ ret = vfio_populate_device(vbasedev);
+ if (ret) {
+ error_report("vfio: failed to populate device %s", path);
+ vfio_put_group(group);
+ }
+
return ret;
}
@@ -536,7 +627,17 @@ static void vfio_platform_realize(DeviceState *dev, Error **errp)
vbasedev->type = VFIO_DEVICE_TYPE_PLATFORM;
vbasedev->ops = &vfio_platform_ops;
+
+#ifdef CONFIG_KVM
+ if (kvm_irqfds_enabled() && kvm_resamplefds_enabled() &&
+ vdev->irqfd_allowed) {
+ vdev->start_irq_fn = vfio_start_irqfd_injection;
+ } else {
+ vdev->start_irq_fn = vfio_start_eventfd_injection;
+ }
+#else
vdev->start_irq_fn = vfio_start_eventfd_injection;
+#endif
trace_vfio_platform_realize(vbasedev->name, vdev->compat);
@@ -614,6 +715,7 @@ static Property vfio_platform_dev_properties[] = {
DEFINE_PROP_STRING("host", VFIOPlatformDevice, vbasedev.name),
DEFINE_PROP_UINT32("mmap-timeout-ms", VFIOPlatformDevice,
mmap_timeout, 1100),
+ DEFINE_PROP_BOOL("x-irqfd", VFIOPlatformDevice, irqfd_allowed, true),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/include/hw/vfio/vfio-platform.h b/include/hw/vfio/vfio-platform.h
index bd1206e..097448b 100644
--- a/include/hw/vfio/vfio-platform.h
+++ b/include/hw/vfio/vfio-platform.h
@@ -58,6 +58,7 @@ typedef struct VFIOPlatformDevice {
QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
start_irq_fn_t start_irq_fn;
QemuMutex intp_mutex;
+ bool irqfd_allowed; /* debug option to force irqfd on/off */
} VFIOPlatformDevice;
diff --git a/trace-events b/trace-events
index d3685c9..7a6a6aa 100644
--- a/trace-events
+++ b/trace-events
@@ -1567,6 +1567,8 @@ vfio_platform_base_device_init(char *name, int groupid) "%s belongs to group #%d
vfio_platform_realize(char *name, char *compat) "vfio device %s, compat = %s"
vfio_intp_interrupt_set_pending(int index) "irq %d is set PENDING"
vfio_platform_eoi_handle_pending(int index) "handle PENDING IRQ %d"
+vfio_platform_start_irqfd_injection(int index, int gsi, int fd, int resamplefd) "IRQ index=%d, gsi =%d, fd = %d, resamplefd = %d"
+vfio_start_eventfd_injection(int index, int fd) "IRQ index=%d, fd = %d"
#hw/acpi/memory_hotplug.c
mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
--
1.8.3.2
next prev parent reply other threads:[~2015-02-13 3:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 3:47 [Qemu-devel] [PATCH v10 0/7] KVM platform device passthrough Eric Auger
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 1/7] linux-headers: update VFIO header for VFIO platform drivers Eric Auger
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 2/7] hw/vfio/platform: vfio-platform skeleton Eric Auger
2015-02-17 10:56 ` Alex Bennée
2015-03-13 9:28 ` Eric Auger
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 3/7] hw/vfio/platform: add irq assignment Eric Auger
2015-02-17 11:24 ` Alex Bennée
2015-03-19 10:18 ` Eric Auger
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 4/7] hw/vfio/platform: add capability to start IRQ propagation Eric Auger
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 5/7] hw/vfio: calxeda xgmac device Eric Auger
2015-02-17 11:29 ` Alex Bennée
2015-02-13 3:47 ` [Qemu-devel] [PATCH v10 6/7] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Eric Auger
2015-02-17 11:36 ` Alex Bennée
2015-03-13 9:33 ` Eric Auger
2015-02-13 3:47 ` Eric Auger [this message]
2015-02-17 11:41 ` [Qemu-devel] [PATCH v10 7/7] hw/vfio/platform: add irqfd support Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423799232-10816-8-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=Bharat.Bhushan@freescale.com \
--cc=a.motakis@virtualopensystems.com \
--cc=a.rigo@virtualopensystems.com \
--cc=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@st.com \
--cc=feng.wu@intel.com \
--cc=kim.phillips@freescale.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).