From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 25/65] libqos/ahci: Add ahci_port_check_interrupts helper
Date: Fri, 13 Feb 2015 16:24:21 +0000 [thread overview]
Message-ID: <1423844701-21041-26-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1423844701-21041-1-git-send-email-stefanha@redhat.com>
From: John Snow <jsnow@redhat.com>
A helper that compares a given port's current interrupts and checks them
against a supplied list of expected interrupt bits, and throws an error
if they do not match.
The helper then resets the requested interrupts on this port, and asserts
that the interrupt register is now empty.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
tests/ahci-test.c | 13 ++-----------
tests/libqos/ahci.c | 14 ++++++++++++++
tests/libqos/ahci.h | 2 ++
3 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index a3e8f12..32b6be3 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -747,19 +747,10 @@ static void ahci_test_identify(AHCIQState *ahci)
while (BITSET(ahci_px_rreg(ahci, i, AHCI_PX_TFD), AHCI_PX_TFD_STS_BSY)) {
usleep(50);
}
+ /* Check registers for post-command consistency */
ahci_port_check_error(ahci, i);
-
- /* Check for expected interrupts */
- reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
- ASSERT_BIT_SET(reg, AHCI_PX_IS_DHRS);
- ASSERT_BIT_SET(reg, AHCI_PX_IS_PSS);
/* BUG: we expect AHCI_PX_IS_DPS to be set. */
- ASSERT_BIT_CLEAR(reg, AHCI_PX_IS_DPS);
-
- /* Clear expected interrupts and assert all interrupts now cleared. */
- ahci_px_wreg(ahci, i, AHCI_PX_IS,
- AHCI_PX_IS_DHRS | AHCI_PX_IS_PSS | AHCI_PX_IS_DPS);
- g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
+ ahci_port_check_interrupts(ahci, i, AHCI_PX_IS_DHRS | AHCI_PX_IS_PSS);
/* Investigate the CMD, assert that we read 512 bytes */
ahci_get_command_header(ahci, i, cx, &cmd);
diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c
index f3fa472..97dcc99 100644
--- a/tests/libqos/ahci.c
+++ b/tests/libqos/ahci.c
@@ -333,6 +333,20 @@ void ahci_port_check_error(AHCIQState *ahci, uint8_t port)
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
}
+void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
+ uint32_t intr_mask)
+{
+ uint32_t reg;
+
+ /* Check for expected interrupts */
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
+ ASSERT_BIT_SET(reg, intr_mask);
+
+ /* Clear expected interrupts and assert all interrupts now cleared. */
+ ahci_px_wreg(ahci, port, AHCI_PX_IS, intr_mask);
+ g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
+}
+
/* Get the command in #slot of port #port. */
void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
uint8_t slot, AHCICommandHeader *cmd)
diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h
index af62a8a..a2ffa70 100644
--- a/tests/libqos/ahci.h
+++ b/tests/libqos/ahci.h
@@ -434,6 +434,8 @@ void ahci_hba_enable(AHCIQState *ahci);
unsigned ahci_port_select(AHCIQState *ahci);
void ahci_port_clear(AHCIQState *ahci, uint8_t port);
void ahci_port_check_error(AHCIQState *ahci, uint8_t port);
+void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
+ uint32_t intr_mask);
void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
uint8_t slot, AHCICommandHeader *cmd);
void ahci_set_command_header(AHCIQState *ahci, uint8_t port,
--
2.1.0
next prev parent reply other threads:[~2015-02-13 16:34 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 16:23 [Qemu-devel] [PULL 00/65] Block patches Stefan Hajnoczi
2015-02-13 16:23 ` [Qemu-devel] [PULL 01/65] nbd: Drop BDS backpointer Stefan Hajnoczi
2015-02-13 16:23 ` [Qemu-devel] [PULL 02/65] iotests: Add "wait" functionality to _cleanup_qemu Stefan Hajnoczi
2015-02-13 16:23 ` [Qemu-devel] [PULL 03/65] iotests: Add test for drive-mirror with NBD target Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 04/65] libqos: Split apart pc_alloc_init Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 05/65] qtest/ahci: Create ahci.h Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 06/65] libqos: create libqos.c Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 07/65] libqos: add qtest_vboot Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 08/65] libqos: add alloc_init_flags Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 09/65] libqos: Update QGuestAllocator to be opaque Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 10/65] libqos: add pc specific interface Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 11/65] qtest/ahci: Store hba_base in AHCIQState Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 12/65] qtest/ahci: finalize AHCIQState consolidation Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 13/65] qtest/ahci: remove pcibus global Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 14/65] qtest/ahci: remove guest_malloc global Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 15/65] libqos/ahci: Functional register helpers Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 16/65] qtest/ahci: remove getter/setter macros Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 17/65] qtest/ahci: Bookmark FB and CLB pointers Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 18/65] libqos/ahci: create libqos/ahci.c Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 19/65] dataplane: endianness-aware accesses Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 20/65] libqos/ahci: Add ahci_port_select helper Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 21/65] libqos/ahci: Add ahci_port_clear helper Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 22/65] qtest/ahci: rename 'Command' to 'CommandHeader' Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 23/65] libqos/ahci: Add command header helpers Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 24/65] libqos/ahci: Add ahci_port_check_error helper Stefan Hajnoczi
2015-02-13 16:24 ` Stefan Hajnoczi [this message]
2015-02-13 16:24 ` [Qemu-devel] [PULL 26/65] libqos/ahci: Add port_check_nonbusy helper Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 27/65] libqos/ahci: Add cmd response sanity check helpers Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 28/65] qtest/ahci: Demagic ahci tests Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 29/65] qtest/ahci: add ahci_write_fis Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 30/65] libqos/ahci: Add ide cmd properties Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 31/65] libqos/ahci: add ahci command functions Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 32/65] libqos/ahci: add ahci command verify Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 33/65] libqos/ahci: add ahci command size setters Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 34/65] libqos/ahci: Add ahci_guest_io Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 35/65] libqos/ahci: add ahci_io Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 36/65] libqos/ahci: Add ahci_clean_mem Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 37/65] qtest/ahci: Assert sector size in identify test Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 38/65] qtest/ahci: Adding simple dma read-write test Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 39/65] nbd: fix the co_queue multi-adding bug Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 40/65] savevm: Improve error message for blocked migration Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 41/65] block: vmdk - fixed sizeof() error Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 42/65] qtest: Fix deadloop by running main loop AIO context's timers Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 43/65] qemu-io: Account IO by aio_read and aio_write Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 44/65] qtest: Add scripts/qtest.py Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 45/65] qemu-iotests: Add VM method qtest() to iotests.py Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 46/65] qemu-iotests: Allow caller to disable underscore convertion for qmp Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 47/65] qemu-iotests: Add 093 for IO throttling Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 48/65] qemu-img: Fix qemu-img convert -n Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 49/65] iotests: Add test for qemu-img convert to NBD Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 50/65] block: Lift some BDS functions to the BlockBackend Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 51/65] block: Add blk_new_open() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 52/65] block: Add Error parameter to bdrv_find_protocol() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 53/65] iotests: Add test for driver=qcow2, format=qcow2 Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 54/65] blockdev: Use blk_new_open() in blockdev_init() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 55/65] block/xen: Use blk_new_open() in blk_connect() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 56/65] qemu-img: Use blk_new_open() in img_open() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 57/65] qemu-img: Use blk_new_open() in img_rebase() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 58/65] qemu-img: Use BlockBackend as far as possible Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 59/65] qemu-nbd: Use blk_new_open() in main() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 60/65] qemu-io: Use blk_new_open() in openfile() Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 61/65] qemu-io: Remove "growable" option Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 62/65] qemu-io: Use BlockBackend Stefan Hajnoczi
2015-02-13 16:24 ` [Qemu-devel] [PULL 63/65] block: Clamp BlockBackend requests Stefan Hajnoczi
2015-02-13 16:25 ` [Qemu-devel] [PULL 64/65] block: Remove "growable" from BDS Stefan Hajnoczi
2015-02-13 16:25 ` [Qemu-devel] [PULL 65/65] block: Keep bdrv_check*_request()'s return value Stefan Hajnoczi
2015-02-14 0:50 ` [Qemu-devel] [PULL 00/65] Block patches Peter Maydell
2015-02-16 14:12 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423844701-21041-26-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).