qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Fam Zheng <famz@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL v2 19/65] dataplane: endianness-aware accesses
Date: Mon, 16 Feb 2015 15:45:44 +0000	[thread overview]
Message-ID: <1424101590-7627-20-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1424101590-7627-1-git-send-email-stefanha@redhat.com>

From: Cornelia Huck <cornelia.huck@de.ibm.com>

The vring.c code currently assumes that guest and host endianness match,
which is not true for a number of cases:

- emulating targets with a different endianness than the host
- bi-endian targets, where the correct endianness depends on the virtio
  device
- upcoming support for the virtio-1 standard mandates little-endian
  accesses even for big-endian targets and hosts

Make sure to use accessors that depend on the virtio device.

Note that dataplane now needs to be built per-target.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1422289602-17874-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/block/dataplane/virtio-blk.c               |  4 +-
 hw/scsi/virtio-scsi-dataplane.c               |  2 +-
 hw/virtio/Makefile.objs                       |  2 +-
 hw/virtio/dataplane/Makefile.objs             |  2 +-
 hw/virtio/dataplane/vring.c                   | 53 ++++++++++++-------
 include/hw/virtio/dataplane/vring-accessors.h | 75 +++++++++++++++++++++++++++
 include/hw/virtio/dataplane/vring.h           | 14 +----
 7 files changed, 117 insertions(+), 35 deletions(-)
 create mode 100644 include/hw/virtio/dataplane/vring-accessors.h

diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
index be957d1..cd41478 100644
--- a/hw/block/dataplane/virtio-blk.c
+++ b/hw/block/dataplane/virtio-blk.c
@@ -16,7 +16,9 @@
 #include "qemu/iov.h"
 #include "qemu/thread.h"
 #include "qemu/error-report.h"
+#include "hw/virtio/virtio-access.h"
 #include "hw/virtio/dataplane/vring.h"
+#include "hw/virtio/dataplane/vring-accessors.h"
 #include "sysemu/block-backend.h"
 #include "hw/virtio/virtio-blk.h"
 #include "virtio-blk.h"
@@ -75,7 +77,7 @@ static void complete_request_vring(VirtIOBlockReq *req, unsigned char status)
     VirtIOBlockDataPlane *s = req->dev->dataplane;
     stb_p(&req->in->status, status);
 
-    vring_push(&req->dev->dataplane->vring, &req->elem,
+    vring_push(s->vdev, &req->dev->dataplane->vring, &req->elem,
                req->qiov.size + sizeof(*req->in));
 
     /* Suppress notification to guest by BH and its scheduled
diff --git a/hw/scsi/virtio-scsi-dataplane.c b/hw/scsi/virtio-scsi-dataplane.c
index 03a1e8c..418d73b 100644
--- a/hw/scsi/virtio-scsi-dataplane.c
+++ b/hw/scsi/virtio-scsi-dataplane.c
@@ -94,7 +94,7 @@ void virtio_scsi_vring_push_notify(VirtIOSCSIReq *req)
 {
     VirtIODevice *vdev = VIRTIO_DEVICE(req->vring->parent);
 
-    vring_push(&req->vring->vring, &req->elem,
+    vring_push(vdev, &req->vring->vring, &req->elem,
                req->qsgl.size + req->resp_iov.size);
 
     if (vring_should_notify(vdev, &req->vring->vring)) {
diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
index d21c397..19b224a 100644
--- a/hw/virtio/Makefile.objs
+++ b/hw/virtio/Makefile.objs
@@ -2,7 +2,7 @@ common-obj-y += virtio-rng.o
 common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
 common-obj-y += virtio-bus.o
 common-obj-y += virtio-mmio.o
-common-obj-$(CONFIG_VIRTIO) += dataplane/
+obj-$(CONFIG_VIRTIO) += dataplane/
 
 obj-y += virtio.o virtio-balloon.o 
 obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o
diff --git a/hw/virtio/dataplane/Makefile.objs b/hw/virtio/dataplane/Makefile.objs
index 9a8cfc0..753a9ca 100644
--- a/hw/virtio/dataplane/Makefile.objs
+++ b/hw/virtio/dataplane/Makefile.objs
@@ -1 +1 @@
-common-obj-y += vring.o
+obj-y += vring.o
diff --git a/hw/virtio/dataplane/vring.c b/hw/virtio/dataplane/vring.c
index 78c6f45..0936f65 100644
--- a/hw/virtio/dataplane/vring.c
+++ b/hw/virtio/dataplane/vring.c
@@ -18,7 +18,9 @@
 #include "hw/hw.h"
 #include "exec/memory.h"
 #include "exec/address-spaces.h"
+#include "hw/virtio/virtio-access.h"
 #include "hw/virtio/dataplane/vring.h"
+#include "hw/virtio/dataplane/vring-accessors.h"
 #include "qemu/error-report.h"
 
 /* vring_map can be coupled with vring_unmap or (if you still have the
@@ -83,7 +85,7 @@ bool vring_setup(Vring *vring, VirtIODevice *vdev, int n)
     vring_init(&vring->vr, virtio_queue_get_num(vdev, n), vring_ptr, 4096);
 
     vring->last_avail_idx = virtio_queue_get_last_avail_idx(vdev, n);
-    vring->last_used_idx = vring->vr.used->idx;
+    vring->last_used_idx = vring_get_used_idx(vdev, vring);
     vring->signalled_used = 0;
     vring->signalled_used_valid = false;
 
@@ -104,7 +106,7 @@ void vring_teardown(Vring *vring, VirtIODevice *vdev, int n)
 void vring_disable_notification(VirtIODevice *vdev, Vring *vring)
 {
     if (!(vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX))) {
-        vring->vr.used->flags |= VRING_USED_F_NO_NOTIFY;
+        vring_set_used_flags(vdev, vring, VRING_USED_F_NO_NOTIFY);
     }
 }
 
@@ -117,10 +119,10 @@ bool vring_enable_notification(VirtIODevice *vdev, Vring *vring)
     if (vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX)) {
         vring_avail_event(&vring->vr) = vring->vr.avail->idx;
     } else {
-        vring->vr.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+        vring_clear_used_flags(vdev, vring, VRING_USED_F_NO_NOTIFY);
     }
     smp_mb(); /* ensure update is seen before reading avail_idx */
-    return !vring_more_avail(vring);
+    return !vring_more_avail(vdev, vring);
 }
 
 /* This is stolen from linux/drivers/vhost/vhost.c:vhost_notify() */
@@ -134,12 +136,13 @@ bool vring_should_notify(VirtIODevice *vdev, Vring *vring)
     smp_mb();
 
     if ((vdev->guest_features & (1 << VIRTIO_F_NOTIFY_ON_EMPTY)) &&
-        unlikely(vring->vr.avail->idx == vring->last_avail_idx)) {
+        unlikely(!vring_more_avail(vdev, vring))) {
         return true;
     }
 
     if (!(vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX))) {
-        return !(vring->vr.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
+        return !(vring_get_avail_flags(vdev, vring) &
+                 VRING_AVAIL_F_NO_INTERRUPT);
     }
     old = vring->signalled_used;
     v = vring->signalled_used_valid;
@@ -202,9 +205,19 @@ static int get_desc(Vring *vring, VirtQueueElement *elem,
     return 0;
 }
 
+static void copy_in_vring_desc(VirtIODevice *vdev,
+                               const struct vring_desc *guest,
+                               struct vring_desc *host)
+{
+    host->addr = virtio_ldq_p(vdev, &guest->addr);
+    host->len = virtio_ldl_p(vdev, &guest->len);
+    host->flags = virtio_lduw_p(vdev, &guest->flags);
+    host->next = virtio_lduw_p(vdev, &guest->next);
+}
+
 /* This is stolen from linux/drivers/vhost/vhost.c. */
-static int get_indirect(Vring *vring, VirtQueueElement *elem,
-                        struct vring_desc *indirect)
+static int get_indirect(VirtIODevice *vdev, Vring *vring,
+                        VirtQueueElement *elem, struct vring_desc *indirect)
 {
     struct vring_desc desc;
     unsigned int i = 0, count, found = 0;
@@ -244,7 +257,7 @@ static int get_indirect(Vring *vring, VirtQueueElement *elem,
             vring->broken = true;
             return -EFAULT;
         }
-        desc = *desc_ptr;
+        copy_in_vring_desc(vdev, desc_ptr, &desc);
         memory_region_unref(mr);
 
         /* Ensure descriptor has been loaded before accessing fields */
@@ -320,7 +333,7 @@ int vring_pop(VirtIODevice *vdev, Vring *vring,
 
     /* Check it isn't doing very strange things with descriptor numbers. */
     last_avail_idx = vring->last_avail_idx;
-    avail_idx = vring->vr.avail->idx;
+    avail_idx = vring_get_avail_idx(vdev, vring);
     barrier(); /* load indices now and not again later */
 
     if (unlikely((uint16_t)(avail_idx - last_avail_idx) > num)) {
@@ -341,7 +354,7 @@ int vring_pop(VirtIODevice *vdev, Vring *vring,
 
     /* Grab the next descriptor number they're advertising, and increment
      * the index we've seen. */
-    head = vring->vr.avail->ring[last_avail_idx % num];
+    head = vring_get_avail_ring(vdev, vring, last_avail_idx % num);
 
     elem->index = head;
 
@@ -365,13 +378,13 @@ int vring_pop(VirtIODevice *vdev, Vring *vring,
             ret = -EFAULT;
             goto out;
         }
-        desc = vring->vr.desc[i];
+        copy_in_vring_desc(vdev, &vring->vr.desc[i], &desc);
 
         /* Ensure descriptor is loaded before accessing fields */
         barrier();
 
         if (desc.flags & VRING_DESC_F_INDIRECT) {
-            ret = get_indirect(vring, elem, &desc);
+            ret = get_indirect(vdev, vring, elem, &desc);
             if (ret < 0) {
                 goto out;
             }
@@ -407,9 +420,9 @@ out:
  *
  * Stolen from linux/drivers/vhost/vhost.c.
  */
-void vring_push(Vring *vring, VirtQueueElement *elem, int len)
+void vring_push(VirtIODevice *vdev, Vring *vring, VirtQueueElement *elem,
+                int len)
 {
-    struct vring_used_elem *used;
     unsigned int head = elem->index;
     uint16_t new;
 
@@ -422,14 +435,16 @@ void vring_push(Vring *vring, VirtQueueElement *elem, int len)
 
     /* The virtqueue contains a ring of used buffers.  Get a pointer to the
      * next entry in that used ring. */
-    used = &vring->vr.used->ring[vring->last_used_idx % vring->vr.num];
-    used->id = head;
-    used->len = len;
+    vring_set_used_ring_id(vdev, vring, vring->last_used_idx % vring->vr.num,
+                           head);
+    vring_set_used_ring_len(vdev, vring, vring->last_used_idx % vring->vr.num,
+                            len);
 
     /* Make sure buffer is written before we update index. */
     smp_wmb();
 
-    new = vring->vr.used->idx = ++vring->last_used_idx;
+    new = ++vring->last_used_idx;
+    vring_set_used_idx(vdev, vring, new);
     if (unlikely((int16_t)(new - vring->signalled_used) < (uint16_t)1)) {
         vring->signalled_used_valid = false;
     }
diff --git a/include/hw/virtio/dataplane/vring-accessors.h b/include/hw/virtio/dataplane/vring-accessors.h
new file mode 100644
index 0000000..b508b87
--- /dev/null
+++ b/include/hw/virtio/dataplane/vring-accessors.h
@@ -0,0 +1,75 @@
+#ifndef VRING_ACCESSORS_H
+#define VRING_ACCESSORS_H
+
+#include "hw/virtio/virtio_ring.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-access.h"
+
+static inline uint16_t vring_get_used_idx(VirtIODevice *vdev, Vring *vring)
+{
+    return virtio_tswap16(vdev, vring->vr.used->idx);
+}
+
+static inline void vring_set_used_idx(VirtIODevice *vdev, Vring *vring,
+                                      uint16_t idx)
+{
+    vring->vr.used->idx = virtio_tswap16(vdev, idx);
+}
+
+static inline uint16_t vring_get_avail_idx(VirtIODevice *vdev, Vring *vring)
+{
+    return virtio_tswap16(vdev, vring->vr.avail->idx);
+}
+
+static inline uint16_t vring_get_avail_ring(VirtIODevice *vdev, Vring *vring,
+                                            int i)
+{
+    return virtio_tswap16(vdev, vring->vr.avail->ring[i]);
+}
+
+static inline void vring_set_used_ring_id(VirtIODevice *vdev, Vring *vring,
+                                          int i, uint32_t id)
+{
+    vring->vr.used->ring[i].id = virtio_tswap32(vdev, id);
+}
+
+static inline void vring_set_used_ring_len(VirtIODevice *vdev, Vring *vring,
+                                          int i, uint32_t len)
+{
+    vring->vr.used->ring[i].len = virtio_tswap32(vdev, len);
+}
+
+static inline uint16_t vring_get_used_flags(VirtIODevice *vdev, Vring *vring)
+{
+    return virtio_tswap16(vdev, vring->vr.used->flags);
+}
+
+static inline uint16_t vring_get_avail_flags(VirtIODevice *vdev, Vring *vring)
+{
+    return virtio_tswap16(vdev, vring->vr.avail->flags);
+}
+
+static inline void vring_set_used_flags(VirtIODevice *vdev, Vring *vring,
+                                        uint16_t flags)
+{
+    vring->vr.used->flags |= virtio_tswap16(vdev, flags);
+}
+
+static inline void vring_clear_used_flags(VirtIODevice *vdev, Vring *vring,
+                                          uint16_t flags)
+{
+    vring->vr.used->flags &= virtio_tswap16(vdev, ~flags);
+}
+
+static inline unsigned int vring_get_num(Vring *vring)
+{
+    return vring->vr.num;
+}
+
+/* Are there more descriptors available? */
+static inline bool vring_more_avail(VirtIODevice *vdev, Vring *vring)
+{
+    return vring_get_avail_idx(vdev, vring) != vring->last_avail_idx;
+}
+
+#endif
diff --git a/include/hw/virtio/dataplane/vring.h b/include/hw/virtio/dataplane/vring.h
index d3e086a..e42c0fc 100644
--- a/include/hw/virtio/dataplane/vring.h
+++ b/include/hw/virtio/dataplane/vring.h
@@ -31,17 +31,6 @@ typedef struct {
     bool broken;                    /* was there a fatal error? */
 } Vring;
 
-static inline unsigned int vring_get_num(Vring *vring)
-{
-    return vring->vr.num;
-}
-
-/* Are there more descriptors available? */
-static inline bool vring_more_avail(Vring *vring)
-{
-    return vring->vr.avail->idx != vring->last_avail_idx;
-}
-
 /* Fail future vring_pop() and vring_push() calls until reset */
 static inline void vring_set_broken(Vring *vring)
 {
@@ -54,6 +43,7 @@ void vring_disable_notification(VirtIODevice *vdev, Vring *vring);
 bool vring_enable_notification(VirtIODevice *vdev, Vring *vring);
 bool vring_should_notify(VirtIODevice *vdev, Vring *vring);
 int vring_pop(VirtIODevice *vdev, Vring *vring, VirtQueueElement *elem);
-void vring_push(Vring *vring, VirtQueueElement *elem, int len);
+void vring_push(VirtIODevice *vdev, Vring *vring, VirtQueueElement *elem,
+                int len);
 
 #endif /* VRING_H */
-- 
2.1.0

  parent reply	other threads:[~2015-02-16 15:47 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-16 15:45 [Qemu-devel] [PULL v2 00/65] Block patches Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 01/65] nbd: Drop BDS backpointer Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 02/65] iotests: Add "wait" functionality to _cleanup_qemu Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 03/65] iotests: Add test for drive-mirror with NBD target Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 04/65] libqos: Split apart pc_alloc_init Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 05/65] qtest/ahci: Create ahci.h Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 06/65] libqos: create libqos.c Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 07/65] libqos: add qtest_vboot Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 08/65] libqos: add alloc_init_flags Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 09/65] libqos: Update QGuestAllocator to be opaque Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 10/65] libqos: add pc specific interface Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 11/65] qtest/ahci: Store hba_base in AHCIQState Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 12/65] qtest/ahci: finalize AHCIQState consolidation Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 13/65] qtest/ahci: remove pcibus global Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 14/65] qtest/ahci: remove guest_malloc global Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 15/65] libqos/ahci: Functional register helpers Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 16/65] qtest/ahci: remove getter/setter macros Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 17/65] qtest/ahci: Bookmark FB and CLB pointers Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 18/65] libqos/ahci: create libqos/ahci.c Stefan Hajnoczi
2015-02-16 15:45 ` Stefan Hajnoczi [this message]
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 20/65] libqos/ahci: Add ahci_port_select helper Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 21/65] libqos/ahci: Add ahci_port_clear helper Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 22/65] qtest/ahci: rename 'Command' to 'CommandHeader' Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 23/65] libqos/ahci: Add command header helpers Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 24/65] libqos/ahci: Add ahci_port_check_error helper Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 25/65] libqos/ahci: Add ahci_port_check_interrupts helper Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 26/65] libqos/ahci: Add port_check_nonbusy helper Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 27/65] libqos/ahci: Add cmd response sanity check helpers Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 28/65] qtest/ahci: Demagic ahci tests Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 29/65] qtest/ahci: add ahci_write_fis Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 30/65] libqos/ahci: Add ide cmd properties Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 31/65] libqos/ahci: add ahci command functions Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 32/65] libqos/ahci: add ahci command verify Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 33/65] libqos/ahci: add ahci command size setters Stefan Hajnoczi
2015-02-16 15:45 ` [Qemu-devel] [PULL v2 34/65] libqos/ahci: Add ahci_guest_io Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 35/65] libqos/ahci: add ahci_io Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 36/65] libqos/ahci: Add ahci_clean_mem Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 37/65] qtest/ahci: Assert sector size in identify test Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 38/65] qtest/ahci: Adding simple dma read-write test Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 39/65] nbd: fix the co_queue multi-adding bug Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 40/65] savevm: Improve error message for blocked migration Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 41/65] block: vmdk - fixed sizeof() error Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 42/65] qtest: Fix deadloop by running main loop AIO context's timers Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 43/65] qemu-io: Account IO by aio_read and aio_write Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 44/65] qtest: Add scripts/qtest.py Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 45/65] qemu-iotests: Add VM method qtest() to iotests.py Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 46/65] qemu-iotests: Allow caller to disable underscore convertion for qmp Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 47/65] qemu-iotests: Add 093 for IO throttling Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 48/65] qemu-img: Fix qemu-img convert -n Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 49/65] iotests: Add test for qemu-img convert to NBD Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 50/65] block: Lift some BDS functions to the BlockBackend Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 51/65] block: Add blk_new_open() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 52/65] block: Add Error parameter to bdrv_find_protocol() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 53/65] iotests: Add test for driver=qcow2, format=qcow2 Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 54/65] blockdev: Use blk_new_open() in blockdev_init() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 55/65] block/xen: Use blk_new_open() in blk_connect() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 56/65] qemu-img: Use blk_new_open() in img_open() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 57/65] qemu-img: Use blk_new_open() in img_rebase() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 58/65] qemu-img: Use BlockBackend as far as possible Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 59/65] qemu-nbd: Use blk_new_open() in main() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 60/65] qemu-io: Use blk_new_open() in openfile() Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 61/65] qemu-io: Remove "growable" option Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 62/65] qemu-io: Use BlockBackend Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 63/65] block: Clamp BlockBackend requests Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 64/65] block: Remove "growable" from BDS Stefan Hajnoczi
2015-02-16 15:46 ` [Qemu-devel] [PULL v2 65/65] block: Keep bdrv_check*_request()'s return value Stefan Hajnoczi
2015-02-24 13:57 ` [Qemu-devel] [PULL v2 00/65] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424101590-7627-20-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=cornelia.huck@de.ibm.com \
    --cc=famz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).