From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: hdegoede@redhat.com, kraxel@redhat.com
Subject: [Qemu-devel] [PATCH 1/4] usb: Propagate errors through usb_register_companion()
Date: Tue, 17 Feb 2015 14:28:02 +0100 [thread overview]
Message-ID: <1424179685-21050-2-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1424179685-21050-1-git-send-email-armbru@redhat.com>
This loses the messages explaining the error printed with
error_printf_unless_qmp(). The next commit will make up for the loss.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
hw/usb/bus.c | 17 ++++++++++-------
hw/usb/hcd-ehci.c | 23 +++++++++++++----------
hw/usb/hcd-ohci.c | 10 +++++++---
hw/usb/hcd-uhci.c | 10 +++++++---
include/hw/usb.h | 12 +++++++-----
5 files changed, 44 insertions(+), 28 deletions(-)
diff --git a/hw/usb/bus.c b/hw/usb/bus.c
index 986b2d8..8be942f 100644
--- a/hw/usb/bus.c
+++ b/hw/usb/bus.c
@@ -350,9 +350,10 @@ void usb_register_port(USBBus *bus, USBPort *port, void *opaque, int index,
bus->nfree++;
}
-int usb_register_companion(const char *masterbus, USBPort *ports[],
- uint32_t portcount, uint32_t firstport,
- void *opaque, USBPortOps *ops, int speedmask)
+void usb_register_companion(const char *masterbus, USBPort *ports[],
+ uint32_t portcount, uint32_t firstport,
+ void *opaque, USBPortOps *ops, int speedmask,
+ Error **errp)
{
USBBus *bus;
int i;
@@ -364,21 +365,23 @@ int usb_register_companion(const char *masterbus, USBPort *ports[],
}
if (!bus || !bus->ops->register_companion) {
- qerror_report(QERR_INVALID_PARAMETER_VALUE, "masterbus",
- "an USB masterbus");
+ error_set(errp, QERR_INVALID_PARAMETER_VALUE, "masterbus",
+ "an USB masterbus");
+#if 0 /* conversion from qerror_report() to error_set() broke this: */
if (bus) {
error_printf_unless_qmp(
"USB bus '%s' does not allow companion controllers\n",
masterbus);
}
- return -1;
+#endif
+ return;
}
for (i = 0; i < portcount; i++) {
usb_fill_port(ports[i], opaque, i, ops, speedmask);
}
- return bus->ops->register_companion(bus, ports, portcount, firstport);
+ bus->ops->register_companion(bus, ports, portcount, firstport, errp);
}
void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index ccf54b6..7d16ba8 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -769,30 +769,35 @@ static void ehci_wakeup(USBPort *port)
qemu_bh_schedule(s->async_bh);
}
-static int ehci_register_companion(USBBus *bus, USBPort *ports[],
- uint32_t portcount, uint32_t firstport)
+static void ehci_register_companion(USBBus *bus, USBPort *ports[],
+ uint32_t portcount, uint32_t firstport,
+ Error **errp)
{
EHCIState *s = container_of(bus, EHCIState, bus);
uint32_t i;
if (firstport + portcount > NB_PORTS) {
- qerror_report(QERR_INVALID_PARAMETER_VALUE, "firstport",
- "firstport on masterbus");
+ error_set(errp, QERR_INVALID_PARAMETER_VALUE, "firstport",
+ "firstport on masterbus");
+#if 0 /* conversion from qerror_report() to error_set() broke this: */
error_printf_unless_qmp(
"firstport value of %u makes companion take ports %u - %u, which "
"is outside of the valid range of 0 - %u\n", firstport, firstport,
firstport + portcount - 1, NB_PORTS - 1);
- return -1;
+#endif
+ return;
}
for (i = 0; i < portcount; i++) {
if (s->companion_ports[firstport + i]) {
- qerror_report(QERR_INVALID_PARAMETER_VALUE, "masterbus",
- "an USB masterbus");
+ error_set(errp, QERR_INVALID_PARAMETER_VALUE, "masterbus",
+ "an USB masterbus");
+#if 0 /* conversion from qerror_report() to error_set() broke this: */
error_printf_unless_qmp(
"port %u on masterbus %s already has a companion assigned\n",
firstport + i, bus->qbus.name);
- return -1;
+#endif
+ return;
}
}
@@ -806,8 +811,6 @@ static int ehci_register_companion(USBBus *bus, USBPort *ports[],
s->companion_count++;
s->caps[0x05] = (s->companion_count << 4) | portcount;
-
- return 0;
}
static void ehci_wakeup_endpoint(USBBus *bus, USBEndpoint *ep,
diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index a0d478e..21ec65f 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -1832,6 +1832,7 @@ static int usb_ohci_init(OHCIState *ohci, DeviceState *dev,
char *masterbus, uint32_t firstport,
AddressSpace *as)
{
+ Error *err = NULL;
int i;
ohci->as = as;
@@ -1857,9 +1858,12 @@ static int usb_ohci_init(OHCIState *ohci, DeviceState *dev,
for(i = 0; i < num_ports; i++) {
ports[i] = &ohci->rhport[i].port;
}
- if (usb_register_companion(masterbus, ports, num_ports,
- firstport, ohci, &ohci_port_ops,
- USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) {
+ usb_register_companion(masterbus, ports, num_ports,
+ firstport, ohci, &ohci_port_ops,
+ USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL,
+ &err);
+ if (err) {
+ error_report_err(err);
return -1;
}
} else {
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index f903de7..2ca8de3 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -1192,6 +1192,7 @@ static USBBusOps uhci_bus_ops = {
static int usb_uhci_common_initfn(PCIDevice *dev)
{
+ Error *err = NULL;
PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
UHCIPCIDeviceClass *u = container_of(pc, UHCIPCIDeviceClass, parent_class);
UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
@@ -1209,9 +1210,12 @@ static int usb_uhci_common_initfn(PCIDevice *dev)
for(i = 0; i < NB_PORTS; i++) {
ports[i] = &s->ports[i].port;
}
- if (usb_register_companion(s->masterbus, ports, NB_PORTS,
- s->firstport, s, &uhci_port_ops,
- USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) {
+ usb_register_companion(s->masterbus, ports, NB_PORTS,
+ s->firstport, s, &uhci_port_ops,
+ USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL,
+ &err);
+ if (err) {
+ error_report_err(err);
return -1;
}
} else {
diff --git a/include/hw/usb.h b/include/hw/usb.h
index b20b959..453b22d 100644
--- a/include/hw/usb.h
+++ b/include/hw/usb.h
@@ -526,8 +526,9 @@ struct USBBus {
};
struct USBBusOps {
- int (*register_companion)(USBBus *bus, USBPort *ports[],
- uint32_t portcount, uint32_t firstport);
+ void (*register_companion)(USBBus *bus, USBPort *ports[],
+ uint32_t portcount, uint32_t firstport,
+ Error **errp);
void (*wakeup_endpoint)(USBBus *bus, USBEndpoint *ep, unsigned int stream);
};
@@ -543,9 +544,10 @@ USBDevice *usb_create_simple(USBBus *bus, const char *name);
USBDevice *usbdevice_create(const char *cmdline);
void usb_register_port(USBBus *bus, USBPort *port, void *opaque, int index,
USBPortOps *ops, int speedmask);
-int usb_register_companion(const char *masterbus, USBPort *ports[],
- uint32_t portcount, uint32_t firstport,
- void *opaque, USBPortOps *ops, int speedmask);
+void usb_register_companion(const char *masterbus, USBPort *ports[],
+ uint32_t portcount, uint32_t firstport,
+ void *opaque, USBPortOps *ops, int speedmask,
+ Error **errp);
void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr);
void usb_unregister_port(USBBus *bus, USBPort *port);
void usb_claim_port(USBDevice *dev, Error **errp);
--
1.9.3
next prev parent reply other threads:[~2015-02-17 13:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 13:28 [Qemu-devel] [PATCH 0/4] ucb: Convert remaining PCI HCDs to realize Markus Armbruster
2015-02-17 13:28 ` Markus Armbruster [this message]
2015-02-17 13:28 ` [Qemu-devel] [PATCH 2/4] usb: Improve companion configuration error messages Markus Armbruster
2015-02-17 13:28 ` [Qemu-devel] [PATCH 3/4] ohci: Complete conversion to realize Markus Armbruster
2015-02-17 13:28 ` [Qemu-devel] [PATCH 4/4] uhci: Convert " Markus Armbruster
2015-02-18 8:11 ` [Qemu-devel] [PATCH 0/4] ucb: Convert remaining PCI HCDs " Gerd Hoffmann
2015-02-18 9:18 ` Markus Armbruster
2015-03-09 17:49 ` Markus Armbruster
2015-03-10 9:48 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424179685-21050-2-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=hdegoede@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).