[Qemu-devel] [PULL 37/96] virtio-blk: switch to standard-headers

["Michael S. Tsirkin" <mst@redhat.com>]

Drop duplicated code. Minor codechanges were required
as geometry is a sub-structure now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
---
 include/hw/virtio/virtio-blk.h | 77 +-----------------------------------------
 hw/block/virtio-blk.c          |  8 ++---
 2 files changed, 5 insertions(+), 80 deletions(-)

diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index fc7d311..b3ffcd9 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -14,6 +14,7 @@
 #ifndef _QEMU_VIRTIO_BLK_H
 #define _QEMU_VIRTIO_BLK_H
 
+#include "standard-headers/linux/virtio_blk.h"
 #include "hw/virtio/virtio.h"
 #include "hw/block/block.h"
 #include "sysemu/iothread.h"
@@ -23,88 +24,12 @@
 #define VIRTIO_BLK(obj) \
         OBJECT_CHECK(VirtIOBlock, (obj), TYPE_VIRTIO_BLK)
 
-/* from Linux's linux/virtio_blk.h */
-
-/* The ID for virtio_block */
-#define VIRTIO_ID_BLOCK 2
-
-/* Feature bits */
-#define VIRTIO_BLK_F_BARRIER    0       /* Does host support barriers? */
-#define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
-#define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
-#define VIRTIO_BLK_F_GEOMETRY   4       /* Indicates support of legacy geometry */
-#define VIRTIO_BLK_F_RO         5       /* Disk is read-only */
-#define VIRTIO_BLK_F_BLK_SIZE   6       /* Block size of disk is available*/
-#define VIRTIO_BLK_F_SCSI       7       /* Supports scsi command passthru */
-/* #define VIRTIO_BLK_F_IDENTIFY   8       ATA IDENTIFY supported, DEPRECATED */
-#define VIRTIO_BLK_F_WCE        9       /* write cache enabled */
-#define VIRTIO_BLK_F_TOPOLOGY   10      /* Topology information is available */
-#define VIRTIO_BLK_F_CONFIG_WCE 11      /* write cache configurable */
-
-#define VIRTIO_BLK_ID_BYTES     20      /* ID string length */
-
-struct virtio_blk_config
-{
-    uint64_t capacity;
-    uint32_t size_max;
-    uint32_t seg_max;
-    uint16_t cylinders;
-    uint8_t heads;
-    uint8_t sectors;
-    uint32_t blk_size;
-    uint8_t physical_block_exp;
-    uint8_t alignment_offset;
-    uint16_t min_io_size;
-    uint32_t opt_io_size;
-    uint8_t wce;
-} QEMU_PACKED;
-
-/* These two define direction. */
-#define VIRTIO_BLK_T_IN         0
-#define VIRTIO_BLK_T_OUT        1
-
-/* This bit says it's a scsi command, not an actual read or write. */
-#define VIRTIO_BLK_T_SCSI_CMD   2
-
-/* Flush the volatile write cache */
-#define VIRTIO_BLK_T_FLUSH      4
-
-/* return the device ID string */
-#define VIRTIO_BLK_T_GET_ID     8
-
-/* Barrier before this op. */
-#define VIRTIO_BLK_T_BARRIER    0x80000000
-
-/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
-    /* VIRTIO_BLK_T* */
-    uint32_t type;
-    /* io priority. */
-    uint32_t ioprio;
-    /* Sector (ie. 512 byte offset) */
-    uint64_t sector;
-};
-
-#define VIRTIO_BLK_S_OK         0
-#define VIRTIO_BLK_S_IOERR      1
-#define VIRTIO_BLK_S_UNSUPP     2
-
 /* This is the last element of the write scatter-gather list */
 struct virtio_blk_inhdr
 {
     unsigned char status;
 };
 
-/* SCSI pass-through header */
-struct virtio_scsi_inhdr
-{
-    uint32_t errors;
-    uint32_t data_len;
-    uint32_t sense_len;
-    uint32_t residual;
-};
-
 struct VirtIOBlkConf
 {
     BlockConf conf;
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 1a8a176..6828f48 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -667,11 +667,11 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
     memset(&blkcfg, 0, sizeof(blkcfg));
     virtio_stq_p(vdev, &blkcfg.capacity, capacity);
     virtio_stl_p(vdev, &blkcfg.seg_max, 128 - 2);
-    virtio_stw_p(vdev, &blkcfg.cylinders, conf->cyls);
+    virtio_stw_p(vdev, &blkcfg.geometry.cylinders, conf->cyls);
     virtio_stl_p(vdev, &blkcfg.blk_size, blk_size);
     virtio_stw_p(vdev, &blkcfg.min_io_size, conf->min_io_size / blk_size);
     virtio_stw_p(vdev, &blkcfg.opt_io_size, conf->opt_io_size / blk_size);
-    blkcfg.heads = conf->heads;
+    blkcfg.geometry.heads = conf->heads;
     /*
      * We must ensure that the block device capacity is a multiple of
      * the logical block size. If that is not the case, let's use
@@ -684,9 +684,9 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
      * per track (cylinder).
      */
     if (blk_getlength(s->blk) /  conf->heads / conf->secs % blk_size) {
-        blkcfg.sectors = conf->secs & ~s->sector_mask;
+        blkcfg.geometry.sectors = conf->secs & ~s->sector_mask;
     } else {
-        blkcfg.sectors = conf->secs;
+        blkcfg.geometry.sectors = conf->secs;
     }
     blkcfg.size_max = 0;
     blkcfg.physical_block_exp = get_physical_block_exp(conf);
-- 
MST