qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Marc Marí" <marc.mari.barcelo@gmail.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Stefan Hajnoczi" <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 11/69] tests: Prepare virtio-blk-test for multi-arch implementation
Date: Fri, 27 Feb 2015 18:18:09 +0000	[thread overview]
Message-ID: <1425061147-1411-12-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1425061147-1411-1-git-send-email-stefanha@redhat.com>

From: Marc Marí <marc.mari.barcelo@gmail.com>

Modularize functions in virtio-blk-test and add PCI suffix for PCI specific
components.

Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-3-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 tests/virtio-blk-test.c | 154 ++++++++++++++++++++++++++++--------------------
 1 file changed, 89 insertions(+), 65 deletions(-)

diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index 2424c84..143d54f 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -55,11 +55,10 @@ typedef struct QVirtioBlkReq {
     uint8_t status;
 } QVirtioBlkReq;
 
-static QPCIBus *test_start(void)
+static char *drive_create(void)
 {
-    char *cmdline;
-    char tmp_path[] = "/tmp/qtest.XXXXXX";
     int fd, ret;
+    char *tmp_path = g_strdup("/tmp/qtest.XXXXXX");
 
     /* Create a temporary raw image */
     fd = mkstemp(tmp_path);
@@ -68,13 +67,24 @@ static QPCIBus *test_start(void)
     g_assert_cmpint(ret, ==, 0);
     close(fd);
 
+    return tmp_path;
+}
+
+static QPCIBus *pci_test_start(void)
+{
+    char *cmdline;
+    char *tmp_path;
+
+    tmp_path = drive_create();
+
     cmdline = g_strdup_printf("-drive if=none,id=drive0,file=%s,format=raw "
-                              "-drive if=none,id=drive1,file=/dev/null,format=raw "
-                              "-device virtio-blk-pci,id=drv0,drive=drive0,"
-                              "addr=%x.%x",
-                              tmp_path, PCI_SLOT, PCI_FN);
+                        "-drive if=none,id=drive1,file=/dev/null,format=raw "
+                        "-device virtio-blk-pci,id=drv0,drive=drive0,"
+                        "addr=%x.%x",
+                        tmp_path, PCI_SLOT, PCI_FN);
     qtest_start(cmdline);
     unlink(tmp_path);
+    g_free(tmp_path);
     g_free(cmdline);
 
     return qpci_init_pc();
@@ -85,7 +95,7 @@ static void test_end(void)
     qtest_end();
 }
 
-static QVirtioPCIDevice *virtio_blk_init(QPCIBus *bus, int slot)
+static QVirtioPCIDevice *virtio_blk_pci_init(QPCIBus *bus, int slot)
 {
     QVirtioPCIDevice *dev;
 
@@ -135,14 +145,10 @@ static uint64_t virtio_blk_request(QGuestAllocator *alloc, QVirtioBlkReq *req,
     return addr;
 }
 
-static void pci_basic(void)
+static void test_basic(const QVirtioBus *bus, QVirtioDevice *dev,
+            QGuestAllocator *alloc, QVirtQueue *vq, uint64_t device_specific)
 {
-    QVirtioPCIDevice *dev;
-    QPCIBus *bus;
-    QVirtQueuePCI *vqpci;
-    QGuestAllocator *alloc;
     QVirtioBlkReq req;
-    void *addr;
     uint64_t req_addr;
     uint64_t capacity;
     uint32_t features;
@@ -150,28 +156,16 @@ static void pci_basic(void)
     uint8_t status;
     char *data;
 
-    bus = test_start();
-
-    dev = virtio_blk_init(bus, PCI_SLOT);
-
-    /* MSI-X is not enabled */
-    addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
-
-    capacity = qvirtio_config_readq(&qvirtio_pci, &dev->vdev,
-                                                    (uint64_t)(uintptr_t)addr);
+    capacity = qvirtio_config_readq(bus, dev, device_specific);
     g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512);
 
-    features = qvirtio_get_features(&qvirtio_pci, &dev->vdev);
+    features = qvirtio_get_features(bus, dev);
     features = features & ~(QVIRTIO_F_BAD_FEATURE |
                     QVIRTIO_F_RING_INDIRECT_DESC | QVIRTIO_F_RING_EVENT_IDX |
                             QVIRTIO_BLK_F_SCSI);
-    qvirtio_set_features(&qvirtio_pci, &dev->vdev, features);
+    qvirtio_set_features(bus, dev, features);
 
-    alloc = pc_alloc_init();
-    vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev,
-                                                                    alloc, 0);
-
-    qvirtio_set_driver_ok(&qvirtio_pci, &dev->vdev);
+    qvirtio_set_driver_ok(bus, dev);
 
     /* Write and read with 2 descriptor layout */
     /* Write request */
@@ -185,12 +179,11 @@ static void pci_basic(void)
 
     g_free(req.data);
 
-    free_head = qvirtqueue_add(&vqpci->vq, req_addr, 528, false, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false);
-    qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head);
+    free_head = qvirtqueue_add(vq, req_addr, 528, false, true);
+    qvirtqueue_add(vq, req_addr + 528, 1, true, false);
+    qvirtqueue_kick(bus, dev, vq, free_head);
 
-    qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq,
-                           QVIRTIO_BLK_TIMEOUT_US);
+    qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US);
     status = readb(req_addr + 528);
     g_assert_cmpint(status, ==, 0);
 
@@ -206,13 +199,12 @@ static void pci_basic(void)
 
     g_free(req.data);
 
-    free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 16, 513, true, false);
+    free_head = qvirtqueue_add(vq, req_addr, 16, false, true);
+    qvirtqueue_add(vq, req_addr + 16, 513, true, false);
 
-    qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head);
+    qvirtqueue_kick(bus, dev, vq, free_head);
 
-    qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq,
-                           QVIRTIO_BLK_TIMEOUT_US);
+    qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US);
     status = readb(req_addr + 528);
     g_assert_cmpint(status, ==, 0);
 
@@ -233,14 +225,15 @@ static void pci_basic(void)
 
     req_addr = virtio_blk_request(alloc, &req, 512);
 
-    free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false);
+    g_free(req.data);
 
-    qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head);
+    free_head = qvirtqueue_add(vq, req_addr, 16, false, true);
+    qvirtqueue_add(vq, req_addr + 16, 512, false, true);
+    qvirtqueue_add(vq, req_addr + 528, 1, true, false);
 
-    qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq,
-                           QVIRTIO_BLK_TIMEOUT_US);
+    qvirtqueue_kick(bus, dev, vq, free_head);
+
+    qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US);
     status = readb(req_addr + 528);
     g_assert_cmpint(status, ==, 0);
 
@@ -256,14 +249,13 @@ static void pci_basic(void)
 
     g_free(req.data);
 
-    free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, true, true);
-    qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false);
+    free_head = qvirtqueue_add(vq, req_addr, 16, false, true);
+    qvirtqueue_add(vq, req_addr + 16, 512, true, true);
+    qvirtqueue_add(vq, req_addr + 528, 1, true, false);
 
-    qvirtqueue_kick(&qvirtio_pci, &dev->vdev, &vqpci->vq, free_head);
+    qvirtqueue_kick(bus, dev, vq, free_head);
 
-    qvirtio_wait_queue_isr(&qvirtio_pci, &dev->vdev, &vqpci->vq,
-                           QVIRTIO_BLK_TIMEOUT_US);
+    qvirtio_wait_queue_isr(bus, dev, vq, QVIRTIO_BLK_TIMEOUT_US);
     status = readb(req_addr + 528);
     g_assert_cmpint(status, ==, 0);
 
@@ -273,11 +265,35 @@ static void pci_basic(void)
     g_free(data);
 
     guest_free(alloc, req_addr);
+}
+
+static void pci_basic(void)
+{
+    QVirtioPCIDevice *dev;
+    QPCIBus *bus;
+    QVirtQueuePCI *vqpci;
+    QGuestAllocator *alloc;
+    void *addr;
+
+    bus = pci_test_start();
+    dev = virtio_blk_pci_init(bus, PCI_SLOT);
+
+    alloc = pc_alloc_init();
+    vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&qvirtio_pci, &dev->vdev,
+                                                                    alloc, 0);
+
+    /* MSI-X is not enabled */
+    addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
+
+    test_basic(&qvirtio_pci, &dev->vdev, alloc, &vqpci->vq,
+                                                    (uint64_t)(uintptr_t)addr);
 
     /* End test */
     guest_free(alloc, vqpci->vq.desc);
+    pc_alloc_uninit(alloc);
     qvirtio_pci_device_disable(dev);
     g_free(dev);
+    qpci_free_pc(bus);
     test_end();
 }
 
@@ -297,9 +313,9 @@ static void pci_indirect(void)
     uint8_t status;
     char *data;
 
-    bus = test_start();
+    bus = pci_test_start();
 
-    dev = virtio_blk_init(bus, PCI_SLOT);
+    dev = virtio_blk_pci_init(bus, PCI_SLOT);
 
     /* MSI-X is not enabled */
     addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
@@ -376,8 +392,10 @@ static void pci_indirect(void)
 
     /* End test */
     guest_free(alloc, vqpci->vq.desc);
+    pc_alloc_uninit(alloc);
     qvirtio_pci_device_disable(dev);
     g_free(dev);
+    qpci_free_pc(bus);
     test_end();
 }
 
@@ -389,9 +407,9 @@ static void pci_config(void)
     void *addr;
     uint64_t capacity;
 
-    bus = test_start();
+    bus = pci_test_start();
 
-    dev = virtio_blk_init(bus, PCI_SLOT);
+    dev = virtio_blk_pci_init(bus, PCI_SLOT);
 
     /* MSI-X is not enabled */
     addr = dev->addr + QVIRTIO_DEVICE_SPECIFIC_NO_MSIX;
@@ -412,6 +430,7 @@ static void pci_config(void)
 
     qvirtio_pci_device_disable(dev);
     g_free(dev);
+    qpci_free_pc(bus);
     test_end();
 }
 
@@ -431,10 +450,10 @@ static void pci_msix(void)
     uint8_t status;
     char *data;
 
-    bus = test_start();
+    bus = pci_test_start();
     alloc = pc_alloc_init();
 
-    dev = virtio_blk_init(bus, PCI_SLOT);
+    dev = virtio_blk_pci_init(bus, PCI_SLOT);
     qpci_msix_enable(dev->pdev);
 
     qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
@@ -520,10 +539,12 @@ static void pci_msix(void)
     guest_free(alloc, req_addr);
 
     /* End test */
-    guest_free(alloc, (uint64_t)vqpci->vq.desc);
+    guest_free(alloc, vqpci->vq.desc);
+    pc_alloc_uninit(alloc);
     qpci_msix_disable(dev->pdev);
     qvirtio_pci_device_disable(dev);
     g_free(dev);
+    qpci_free_pc(bus);
     test_end();
 }
 
@@ -542,10 +563,10 @@ static void pci_idx(void)
     uint8_t status;
     char *data;
 
-    bus = test_start();
+    bus = pci_test_start();
     alloc = pc_alloc_init();
 
-    dev = virtio_blk_init(bus, PCI_SLOT);
+    dev = virtio_blk_pci_init(bus, PCI_SLOT);
     qpci_msix_enable(dev->pdev);
 
     qvirtio_pci_set_msix_configuration_vector(dev, alloc, 0);
@@ -643,30 +664,33 @@ static void pci_idx(void)
 
     /* End test */
     guest_free(alloc, vqpci->vq.desc);
+    pc_alloc_uninit(alloc);
     qpci_msix_disable(dev->pdev);
     qvirtio_pci_device_disable(dev);
     g_free(dev);
+    qpci_free_pc(bus);
     test_end();
 }
 
-static void hotplug(void)
+static void pci_hotplug(void)
 {
     QPCIBus *bus;
     QVirtioPCIDevice *dev;
 
-    bus = test_start();
+    bus = pci_test_start();
 
     /* plug secondary disk */
     qpci_plug_device_test("virtio-blk-pci", "drv1", PCI_SLOT_HP,
                           "'drive': 'drive1'");
 
-    dev = virtio_blk_init(bus, PCI_SLOT_HP);
+    dev = virtio_blk_pci_init(bus, PCI_SLOT_HP);
     g_assert(dev);
     qvirtio_pci_device_disable(dev);
     g_free(dev);
 
     /* unplug secondary disk */
     qpci_unplug_acpi_device_test("drv1", PCI_SLOT_HP);
+    qpci_free_pc(bus);
     test_end();
 }
 
@@ -681,7 +705,7 @@ int main(int argc, char **argv)
     g_test_add_func("/virtio/blk/pci/config", pci_config);
     g_test_add_func("/virtio/blk/pci/msix", pci_msix);
     g_test_add_func("/virtio/blk/pci/idx", pci_idx);
-    g_test_add_func("/virtio/blk/pci/hotplug", hotplug);
+    g_test_add_func("/virtio/blk/pci/hotplug", pci_hotplug);
 
     ret = g_test_run();
 
-- 
2.1.0

  parent reply	other threads:[~2015-02-27 18:19 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-27 18:17 [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-02-27 18:17 ` [Qemu-devel] [PULL 01/69] coroutine: Fix use after free with qemu_coroutine_yield() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 02/69] coroutine: Clean up qemu_coroutine_enter() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 03/69] test-coroutine: Regression test for yield bug Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 04/69] vpc: Fix size in fixed image creation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 05/69] vpc: Implement bdrv_co_get_block_status() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 06/69] sheepdog: selectable object size support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 07/69] block/raw-posix: fix compilation warning on OSX Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 08/69] qcow2: Remove unused struct QCowCreateState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 09/69] virtio-blk: Check return value of blk_aio_ioctl Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 10/69] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-02-27 18:18 ` Stefan Hajnoczi [this message]
2015-02-27 18:18 ` [Qemu-devel] [PULL 12/69] libqos: Remove PCI assumptions in constants of virtio driver Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 13/69] libqos: Add malloc generic Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 14/69] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 15/69] qcow2: Add two new fields to BDRVQcowState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 16/69] qcow2: Add refcount_bits to format-specific info Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 17/69] qcow2: Do not return new value after refcount update Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 18/69] qcow2: Only return status from qcow2_get_refcount Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 19/69] qcow2: Use unsigned addend for update_refcount() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 20/69] qcow2: Use 64 bits for refcount values Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 21/69] qcow2: Helper for refcount array reallocation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 22/69] qcow2: Helper function for refcount modification Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 23/69] qcow2: More helpers " Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 24/69] qcow2: Open images with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 25/69] qcow2: refcount_order parameter for qcow2_create2 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 26/69] qcow2: Use symbolic macros in qcow2_amend_options Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 27/69] iotests: Prepare for refcount_bits option Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 28/69] qcow2: Allow creation with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 29/69] iotests: Add test for different refcount widths Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 30/69] blkdebug: fix "once" rule Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 31/69] block: add bdrv functions for geometry and blocksize Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 32/69] raw-posix: Factor block size detection out of raw_probe_alignment() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 33/69] block: Add driver methods to probe blocksizes and geometry Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 34/69] block-backend: Add wrappers for blocksizes and geometry probing Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 35/69] BlockConf: Call backend functions to detect geometry and blocksizes Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 36/69] ide: start extracting ide_restart_dma out of bmdma_restart_dma Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 37/69] ide: prepare to move restart to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 38/69] ide: introduce ide_register_restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 39/69] ide: do not use BMDMA in restart callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 40/69] ide: pass IDEBus to the restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 41/69] ide: move restart callback to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 42/69] ide: remove restart_cb callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 43/69] ide: replace set_unit callback with more IDEBus state Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 44/69] ide: place initial state of the current request to IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 45/69] ide: migrate initial request state via IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 46/69] ide: commonize io_buffer_index initialization Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 47/69] ide: make more functions static Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 48/69] ide: support PIO restart for the ISA controller Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 49/69] ahci: Migrate IDEStatus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 50/69] ahci: add support for restarting non-queued commands Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 51/69] ahci: Recompute cur_cmd on migrate post load Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 52/69] qtest/ide: Test flush / retry for ISA and PCI Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 53/69] libqos/ahci: Zero-fill AHCI headers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 54/69] qtest/ahci: Add a macro bootup routine Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 55/69] libqos/ahci: add ahci command helpers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 56/69] qtest/ahci: Add DMA test variants Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 57/69] qtest/ahci: Add PIO and LBA48 tests Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 58/69] qtest/ahci: add fragmented dma test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 59/69] qtest/ahci: add qcow2 support to ahci-test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 60/69] qtest/ahci: test different disk sectors Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 61/69] qtest/ahci: Add simple flush test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 62/69] qtest/ahci: Allow override of default CLI options Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 63/69] libqtest: add qmp_eventwait Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 64/69] libqtest: add qmp_async Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 65/69] libqos: add blkdebug_prepare_script Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 66/69] qtest/ahci: add flush retry test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 67/69] sheepdog: fix confused return values Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 68/69] libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 69/69] tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test Stefan Hajnoczi
2015-02-27 18:57 ` [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-03-03 14:52   ` Peter Maydell
2015-03-03 17:29     ` Christian Borntraeger
2015-03-03 17:33       ` Max Reitz
2015-03-04  8:28         ` Christian Borntraeger
2015-03-04 12:03           ` Kevin Wolf
2015-03-04 16:32     ` Stefan Hajnoczi
2015-03-08  8:49 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425061147-1411-12-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=marc.mari.barcelo@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).