From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PULL 19/69] qcow2: Use unsigned addend for update_refcount()
Date: Fri, 27 Feb 2015 18:18:17 +0000 [thread overview]
Message-ID: <1425061147-1411-20-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1425061147-1411-1-git-send-email-stefanha@redhat.com>
From: Max Reitz <mreitz@redhat.com>
update_refcount() and qcow2_update_cluster_refcount() currently take a
signed addend. At least one caller passes a value directly derived from
an absolute refcount that should be reached ("l2_refcount - 1" in
expand_zero_clusters_in_l1()). Therefore, the addend should be unsigned
as well; this will be especially important for 64 bit refcounts.
Because update_refcount() then no longer knows whether the refcount
should be increased or decreased, it now requires an additional flag
which specified exactly that. The same applies to
qcow2_update_cluster_refcount().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2-cluster.c | 3 ++-
block/qcow2-refcount.c | 65 +++++++++++++++++++++++++++++++++-----------------
block/qcow2.h | 8 ++++++-
3 files changed, 52 insertions(+), 24 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index ee50500..405329a 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1707,7 +1707,8 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
/* For shared L2 tables, set the refcount accordingly (it is
* already 1 and needs to be l2_refcount) */
ret = qcow2_update_cluster_refcount(bs,
- offset >> s->cluster_bits, l2_refcount - 1,
+ offset >> s->cluster_bits,
+ refcount_diff(1, l2_refcount), false,
QCOW2_DISCARD_OTHER);
if (ret < 0) {
qcow2_free_clusters(bs, offset, s->cluster_size,
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index d853490..354a355 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -29,8 +29,8 @@
static int64_t alloc_clusters_noref(BlockDriverState *bs, uint64_t size);
static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
- int64_t offset, int64_t length,
- int addend, enum qcow2_discard_type type);
+ int64_t offset, int64_t length, uint16_t addend,
+ bool decrease, enum qcow2_discard_type type);
/*********************************************************/
@@ -263,7 +263,7 @@ static int alloc_refcount_block(BlockDriverState *bs,
} else {
/* Described somewhere else. This can recurse at most twice before we
* arrive at a block that describes itself. */
- ret = update_refcount(bs, new_block, s->cluster_size, 1,
+ ret = update_refcount(bs, new_block, s->cluster_size, 1, false,
QCOW2_DISCARD_NEVER);
if (ret < 0) {
goto fail_block;
@@ -530,8 +530,14 @@ found:
}
/* XXX: cache several refcount block clusters ? */
+/* @addend is the absolute value of the addend; if @decrease is set, @addend
+ * will be subtracted from the current refcount, otherwise it will be added */
static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
- int64_t offset, int64_t length, int addend, enum qcow2_discard_type type)
+ int64_t offset,
+ int64_t length,
+ uint16_t addend,
+ bool decrease,
+ enum qcow2_discard_type type)
{
BDRVQcowState *s = bs->opaque;
int64_t start, last, cluster_offset;
@@ -540,8 +546,9 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
int ret;
#ifdef DEBUG_ALLOC2
- fprintf(stderr, "update_refcount: offset=%" PRId64 " size=%" PRId64 " addend=%d\n",
- offset, length, addend);
+ fprintf(stderr, "update_refcount: offset=%" PRId64 " size=%" PRId64
+ " addend=%s%" PRIu16 "\n", offset, length, decrease ? "-" : "",
+ addend);
#endif
if (length < 0) {
return -EINVAL;
@@ -549,7 +556,7 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
return 0;
}
- if (addend < 0) {
+ if (decrease) {
qcow2_cache_set_dependency(bs, s->refcount_block_cache,
s->l2_table_cache);
}
@@ -559,7 +566,8 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
for(cluster_offset = start; cluster_offset <= last;
cluster_offset += s->cluster_size)
{
- int block_index, refcount;
+ int block_index;
+ uint16_t refcount;
int64_t cluster_index = cluster_offset >> s->cluster_bits;
int64_t table_index = cluster_index >> s->refcount_block_bits;
@@ -586,11 +594,18 @@ static int QEMU_WARN_UNUSED_RESULT update_refcount(BlockDriverState *bs,
block_index = cluster_index & (s->refcount_block_size - 1);
refcount = be16_to_cpu(refcount_block[block_index]);
- refcount += addend;
- if (refcount < 0 || refcount > s->refcount_max) {
+ if (decrease ? ((uint16_t)(refcount - addend) > refcount)
+ : ((uint16_t)(refcount + addend) < refcount ||
+ (uint16_t)(refcount + addend) > s->refcount_max))
+ {
ret = -EINVAL;
goto fail;
}
+ if (decrease) {
+ refcount -= addend;
+ } else {
+ refcount += addend;
+ }
if (refcount == 0 && cluster_index < s->free_cluster_index) {
s->free_cluster_index = cluster_index;
}
@@ -623,8 +638,8 @@ fail:
*/
if (ret < 0) {
int dummy;
- dummy = update_refcount(bs, offset, cluster_offset - offset, -addend,
- QCOW2_DISCARD_NEVER);
+ dummy = update_refcount(bs, offset, cluster_offset - offset, addend,
+ !decrease, QCOW2_DISCARD_NEVER);
(void)dummy;
}
@@ -634,18 +649,21 @@ fail:
/*
* Increases or decreases the refcount of a given cluster.
*
+ * @addend is the absolute value of the addend; if @decrease is set, @addend
+ * will be subtracted from the current refcount, otherwise it will be added.
+ *
* On success 0 is returned; on failure -errno is returned.
*/
int qcow2_update_cluster_refcount(BlockDriverState *bs,
int64_t cluster_index,
- int addend,
+ uint16_t addend, bool decrease,
enum qcow2_discard_type type)
{
BDRVQcowState *s = bs->opaque;
int ret;
ret = update_refcount(bs, cluster_index << s->cluster_bits, 1, addend,
- type);
+ decrease, type);
if (ret < 0) {
return ret;
}
@@ -709,7 +727,7 @@ int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size)
return offset;
}
- ret = update_refcount(bs, offset, size, 1, QCOW2_DISCARD_NEVER);
+ ret = update_refcount(bs, offset, size, 1, false, QCOW2_DISCARD_NEVER);
} while (ret == -EAGAIN);
if (ret < 0) {
@@ -746,7 +764,7 @@ int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
}
/* And then allocate them */
- ret = update_refcount(bs, offset, i << s->cluster_bits, 1,
+ ret = update_refcount(bs, offset, i << s->cluster_bits, 1, false,
QCOW2_DISCARD_NEVER);
} while (ret == -EAGAIN);
@@ -797,7 +815,7 @@ int64_t qcow2_alloc_bytes(BlockDriverState *bs, int size)
}
assert(offset);
- ret = update_refcount(bs, offset, size, 1, QCOW2_DISCARD_NEVER);
+ ret = update_refcount(bs, offset, size, 1, false, QCOW2_DISCARD_NEVER);
if (ret < 0) {
return ret;
}
@@ -821,7 +839,7 @@ void qcow2_free_clusters(BlockDriverState *bs,
int ret;
BLKDBG_EVENT(bs->file, BLKDBG_CLUSTER_FREE);
- ret = update_refcount(bs, offset, size, -1, type);
+ ret = update_refcount(bs, offset, size, 1, true, type);
if (ret < 0) {
fprintf(stderr, "qcow2_free_clusters failed: %s\n", strerror(-ret));
/* TODO Remember the clusters to free them later and avoid leaking */
@@ -887,6 +905,8 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
uint16_t refcount;
int ret;
+ assert(addend >= -1 && addend <= 1);
+
l2_table = NULL;
l1_table = NULL;
l1_size2 = l1_size * sizeof(uint64_t);
@@ -951,7 +971,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
if (addend != 0) {
ret = update_refcount(bs,
(offset & s->cluster_offset_mask) & ~511,
- nb_csectors * 512, addend,
+ nb_csectors * 512, abs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -982,7 +1002,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
}
if (addend != 0) {
ret = qcow2_update_cluster_refcount(bs,
- cluster_index, addend,
+ cluster_index, abs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -1025,7 +1045,7 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
if (addend != 0) {
ret = qcow2_update_cluster_refcount(bs, l2_offset >>
s->cluster_bits,
- addend,
+ abs(addend), addend < 0,
QCOW2_DISCARD_SNAPSHOT);
if (ret < 0) {
goto fail;
@@ -1678,7 +1698,8 @@ static void compare_refcounts(BlockDriverState *bs, BdrvCheckResult *res,
if (num_fixed) {
ret = update_refcount(bs, i << s->cluster_bits, 1,
- (int)refcount2 - (int)refcount1,
+ refcount_diff(refcount1, refcount2),
+ refcount1 > refcount2,
QCOW2_DISCARD_ALWAYS);
if (ret >= 0) {
(*num_fixed)++;
diff --git a/block/qcow2.h b/block/qcow2.h
index a33431f..40910d8 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -459,6 +459,11 @@ static inline uint64_t l2meta_cow_end(QCowL2Meta *m)
+ (m->cow_end.nb_sectors << BDRV_SECTOR_BITS);
}
+static inline uint16_t refcount_diff(uint16_t r1, uint16_t r2)
+{
+ return r1 > r2 ? r1 - r2 : r2 - r1;
+}
+
// FIXME Need qcow2_ prefix to global functions
/* qcow2.c functions */
@@ -482,7 +487,8 @@ int qcow2_get_refcount(BlockDriverState *bs, int64_t cluster_index,
uint16_t *refcount);
int qcow2_update_cluster_refcount(BlockDriverState *bs, int64_t cluster_index,
- int addend, enum qcow2_discard_type type);
+ uint16_t addend, bool decrease,
+ enum qcow2_discard_type type);
int64_t qcow2_alloc_clusters(BlockDriverState *bs, uint64_t size);
int qcow2_alloc_clusters_at(BlockDriverState *bs, uint64_t offset,
--
2.1.0
next prev parent reply other threads:[~2015-02-27 18:20 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-27 18:17 [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-02-27 18:17 ` [Qemu-devel] [PULL 01/69] coroutine: Fix use after free with qemu_coroutine_yield() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 02/69] coroutine: Clean up qemu_coroutine_enter() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 03/69] test-coroutine: Regression test for yield bug Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 04/69] vpc: Fix size in fixed image creation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 05/69] vpc: Implement bdrv_co_get_block_status() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 06/69] sheepdog: selectable object size support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 07/69] block/raw-posix: fix compilation warning on OSX Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 08/69] qcow2: Remove unused struct QCowCreateState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 09/69] virtio-blk: Check return value of blk_aio_ioctl Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 10/69] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 11/69] tests: Prepare virtio-blk-test for multi-arch implementation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 12/69] libqos: Remove PCI assumptions in constants of virtio driver Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 13/69] libqos: Add malloc generic Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 14/69] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 15/69] qcow2: Add two new fields to BDRVQcowState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 16/69] qcow2: Add refcount_bits to format-specific info Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 17/69] qcow2: Do not return new value after refcount update Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 18/69] qcow2: Only return status from qcow2_get_refcount Stefan Hajnoczi
2015-02-27 18:18 ` Stefan Hajnoczi [this message]
2015-02-27 18:18 ` [Qemu-devel] [PULL 20/69] qcow2: Use 64 bits for refcount values Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 21/69] qcow2: Helper for refcount array reallocation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 22/69] qcow2: Helper function for refcount modification Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 23/69] qcow2: More helpers " Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 24/69] qcow2: Open images with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 25/69] qcow2: refcount_order parameter for qcow2_create2 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 26/69] qcow2: Use symbolic macros in qcow2_amend_options Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 27/69] iotests: Prepare for refcount_bits option Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 28/69] qcow2: Allow creation with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 29/69] iotests: Add test for different refcount widths Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 30/69] blkdebug: fix "once" rule Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 31/69] block: add bdrv functions for geometry and blocksize Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 32/69] raw-posix: Factor block size detection out of raw_probe_alignment() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 33/69] block: Add driver methods to probe blocksizes and geometry Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 34/69] block-backend: Add wrappers for blocksizes and geometry probing Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 35/69] BlockConf: Call backend functions to detect geometry and blocksizes Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 36/69] ide: start extracting ide_restart_dma out of bmdma_restart_dma Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 37/69] ide: prepare to move restart to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 38/69] ide: introduce ide_register_restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 39/69] ide: do not use BMDMA in restart callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 40/69] ide: pass IDEBus to the restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 41/69] ide: move restart callback to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 42/69] ide: remove restart_cb callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 43/69] ide: replace set_unit callback with more IDEBus state Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 44/69] ide: place initial state of the current request to IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 45/69] ide: migrate initial request state via IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 46/69] ide: commonize io_buffer_index initialization Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 47/69] ide: make more functions static Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 48/69] ide: support PIO restart for the ISA controller Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 49/69] ahci: Migrate IDEStatus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 50/69] ahci: add support for restarting non-queued commands Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 51/69] ahci: Recompute cur_cmd on migrate post load Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 52/69] qtest/ide: Test flush / retry for ISA and PCI Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 53/69] libqos/ahci: Zero-fill AHCI headers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 54/69] qtest/ahci: Add a macro bootup routine Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 55/69] libqos/ahci: add ahci command helpers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 56/69] qtest/ahci: Add DMA test variants Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 57/69] qtest/ahci: Add PIO and LBA48 tests Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 58/69] qtest/ahci: add fragmented dma test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 59/69] qtest/ahci: add qcow2 support to ahci-test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 60/69] qtest/ahci: test different disk sectors Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 61/69] qtest/ahci: Add simple flush test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 62/69] qtest/ahci: Allow override of default CLI options Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 63/69] libqtest: add qmp_eventwait Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 64/69] libqtest: add qmp_async Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 65/69] libqos: add blkdebug_prepare_script Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 66/69] qtest/ahci: add flush retry test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 67/69] sheepdog: fix confused return values Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 68/69] libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 69/69] tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test Stefan Hajnoczi
2015-02-27 18:57 ` [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-03-03 14:52 ` Peter Maydell
2015-03-03 17:29 ` Christian Borntraeger
2015-03-03 17:33 ` Max Reitz
2015-03-04 8:28 ` Christian Borntraeger
2015-03-04 12:03 ` Kevin Wolf
2015-03-04 16:32 ` Stefan Hajnoczi
2015-03-08 8:49 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425061147-1411-20-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).