From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PULL 02/69] coroutine: Clean up qemu_coroutine_enter()
Date: Fri, 27 Feb 2015 18:18:00 +0000 [thread overview]
Message-ID: <1425061147-1411-3-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1425061147-1411-1-git-send-email-stefanha@redhat.com>
From: Kevin Wolf <kwolf@redhat.com>
qemu_coroutine_enter() is now the only user of coroutine_swap(). Both
functions are short, so inline it.
Also, using COROUTINE_YIELD is now even more confusing because this code
is never called during qemu_coroutine_yield() any more. In fact, this
value is never read back, so we can just introduce a new COROUTINE_ENTER
which documents the purpose of the task switch better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/block/coroutine_int.h | 1 +
qemu-coroutine.c | 36 +++++++++++++++---------------------
2 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/include/block/coroutine_int.h b/include/block/coroutine_int.h
index f133d65..9aa1aae 100644
--- a/include/block/coroutine_int.h
+++ b/include/block/coroutine_int.h
@@ -31,6 +31,7 @@
typedef enum {
COROUTINE_YIELD = 1,
COROUTINE_TERMINATE = 2,
+ COROUTINE_ENTER = 3,
} CoroutineAction;
struct Coroutine {
diff --git a/qemu-coroutine.c b/qemu-coroutine.c
index 5019b81..c17a92b 100644
--- a/qemu-coroutine.c
+++ b/qemu-coroutine.c
@@ -99,29 +99,10 @@ static void coroutine_delete(Coroutine *co)
qemu_coroutine_delete(co);
}
-static void coroutine_swap(Coroutine *from, Coroutine *to)
-{
- CoroutineAction ret;
-
- ret = qemu_coroutine_switch(from, to, COROUTINE_YIELD);
-
- qemu_co_queue_run_restart(to);
-
- switch (ret) {
- case COROUTINE_YIELD:
- return;
- case COROUTINE_TERMINATE:
- trace_qemu_coroutine_terminate(to);
- coroutine_delete(to);
- return;
- default:
- abort();
- }
-}
-
void qemu_coroutine_enter(Coroutine *co, void *opaque)
{
Coroutine *self = qemu_coroutine_self();
+ CoroutineAction ret;
trace_qemu_coroutine_enter(self, co, opaque);
@@ -132,7 +113,20 @@ void qemu_coroutine_enter(Coroutine *co, void *opaque)
co->caller = self;
co->entry_arg = opaque;
- coroutine_swap(self, co);
+ ret = qemu_coroutine_switch(self, co, COROUTINE_ENTER);
+
+ qemu_co_queue_run_restart(co);
+
+ switch (ret) {
+ case COROUTINE_YIELD:
+ return;
+ case COROUTINE_TERMINATE:
+ trace_qemu_coroutine_terminate(co);
+ coroutine_delete(co);
+ return;
+ default:
+ abort();
+ }
}
void coroutine_fn qemu_coroutine_yield(void)
--
2.1.0
next prev parent reply other threads:[~2015-02-27 18:19 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-27 18:17 [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-02-27 18:17 ` [Qemu-devel] [PULL 01/69] coroutine: Fix use after free with qemu_coroutine_yield() Stefan Hajnoczi
2015-02-27 18:18 ` Stefan Hajnoczi [this message]
2015-02-27 18:18 ` [Qemu-devel] [PULL 03/69] test-coroutine: Regression test for yield bug Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 04/69] vpc: Fix size in fixed image creation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 05/69] vpc: Implement bdrv_co_get_block_status() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 06/69] sheepdog: selectable object size support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 07/69] block/raw-posix: fix compilation warning on OSX Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 08/69] qcow2: Remove unused struct QCowCreateState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 09/69] virtio-blk: Check return value of blk_aio_ioctl Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 10/69] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 11/69] tests: Prepare virtio-blk-test for multi-arch implementation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 12/69] libqos: Remove PCI assumptions in constants of virtio driver Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 13/69] libqos: Add malloc generic Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 14/69] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 15/69] qcow2: Add two new fields to BDRVQcowState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 16/69] qcow2: Add refcount_bits to format-specific info Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 17/69] qcow2: Do not return new value after refcount update Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 18/69] qcow2: Only return status from qcow2_get_refcount Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 19/69] qcow2: Use unsigned addend for update_refcount() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 20/69] qcow2: Use 64 bits for refcount values Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 21/69] qcow2: Helper for refcount array reallocation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 22/69] qcow2: Helper function for refcount modification Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 23/69] qcow2: More helpers " Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 24/69] qcow2: Open images with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 25/69] qcow2: refcount_order parameter for qcow2_create2 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 26/69] qcow2: Use symbolic macros in qcow2_amend_options Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 27/69] iotests: Prepare for refcount_bits option Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 28/69] qcow2: Allow creation with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 29/69] iotests: Add test for different refcount widths Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 30/69] blkdebug: fix "once" rule Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 31/69] block: add bdrv functions for geometry and blocksize Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 32/69] raw-posix: Factor block size detection out of raw_probe_alignment() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 33/69] block: Add driver methods to probe blocksizes and geometry Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 34/69] block-backend: Add wrappers for blocksizes and geometry probing Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 35/69] BlockConf: Call backend functions to detect geometry and blocksizes Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 36/69] ide: start extracting ide_restart_dma out of bmdma_restart_dma Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 37/69] ide: prepare to move restart to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 38/69] ide: introduce ide_register_restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 39/69] ide: do not use BMDMA in restart callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 40/69] ide: pass IDEBus to the restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 41/69] ide: move restart callback to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 42/69] ide: remove restart_cb callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 43/69] ide: replace set_unit callback with more IDEBus state Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 44/69] ide: place initial state of the current request to IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 45/69] ide: migrate initial request state via IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 46/69] ide: commonize io_buffer_index initialization Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 47/69] ide: make more functions static Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 48/69] ide: support PIO restart for the ISA controller Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 49/69] ahci: Migrate IDEStatus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 50/69] ahci: add support for restarting non-queued commands Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 51/69] ahci: Recompute cur_cmd on migrate post load Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 52/69] qtest/ide: Test flush / retry for ISA and PCI Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 53/69] libqos/ahci: Zero-fill AHCI headers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 54/69] qtest/ahci: Add a macro bootup routine Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 55/69] libqos/ahci: add ahci command helpers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 56/69] qtest/ahci: Add DMA test variants Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 57/69] qtest/ahci: Add PIO and LBA48 tests Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 58/69] qtest/ahci: add fragmented dma test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 59/69] qtest/ahci: add qcow2 support to ahci-test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 60/69] qtest/ahci: test different disk sectors Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 61/69] qtest/ahci: Add simple flush test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 62/69] qtest/ahci: Allow override of default CLI options Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 63/69] libqtest: add qmp_eventwait Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 64/69] libqtest: add qmp_async Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 65/69] libqos: add blkdebug_prepare_script Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 66/69] qtest/ahci: add flush retry test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 67/69] sheepdog: fix confused return values Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 68/69] libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 69/69] tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test Stefan Hajnoczi
2015-02-27 18:57 ` [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-03-03 14:52 ` Peter Maydell
2015-03-03 17:29 ` Christian Borntraeger
2015-03-03 17:33 ` Max Reitz
2015-03-04 8:28 ` Christian Borntraeger
2015-03-04 12:03 ` Kevin Wolf
2015-03-04 16:32 ` Stefan Hajnoczi
2015-03-08 8:49 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425061147-1411-3-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).