qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	John Snow <jsnow@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 38/69] ide: introduce ide_register_restart_cb
Date: Fri, 27 Feb 2015 18:18:36 +0000	[thread overview]
Message-ID: <1425061147-1411-39-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1425061147-1411-1-git-send-email-stefanha@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

A helper is added that registers the IDEDMAOp .restart_cb()
via qemu_add_vm_change_state_handler instead of requiring
each HBA to register the callback themselves.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/ide/cmd646.c   | 3 +--
 hw/ide/core.c     | 5 +++++
 hw/ide/internal.h | 1 +
 hw/ide/piix.c     | 3 +--
 hw/ide/via.c      | 3 +--
 5 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index c8b0322..0374653 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -368,8 +368,7 @@ static int pci_cmd646_ide_initfn(PCIDevice *dev)
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
         d->bmdma[i].bus = &d->bus[i];
-        qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
-                                         &d->bmdma[i].dma);
+        ide_register_restart_cb(&d->bus[i]);
     }
 
     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index ac3f015..5a42771 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2330,6 +2330,11 @@ static const IDEDMAOps ide_dma_nop_ops = {
     .restart_cb     = ide_nop_restart,
 };
 
+void ide_register_restart_cb(IDEBus *bus)
+{
+    qemu_add_vm_change_state_handler(bus->dma->ops->restart_cb, bus->dma);
+}
+
 static IDEDMA ide_dma_nop = {
     .ops = &ide_dma_nop_ops,
     .aiocb = NULL,
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 2566503..57ef5ca 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -551,6 +551,7 @@ int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
                    int chs_trans);
 void ide_init2(IDEBus *bus, qemu_irq irq);
 void ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
+void ide_register_restart_cb(IDEBus *bus);
 
 void ide_exec_cmd(IDEBus *bus, uint32_t val);
 void ide_dma_cb(void *opaque, int ret);
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
index b0172fb..247dd4f 100644
--- a/hw/ide/piix.c
+++ b/hw/ide/piix.c
@@ -143,8 +143,7 @@ static void pci_piix_init_ports(PCIIDEState *d) {
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
         d->bmdma[i].bus = &d->bus[i];
-        qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
-                                         &d->bmdma[i].dma);
+        ide_register_restart_cb(&d->bus[i]);
     }
 }
 
diff --git a/hw/ide/via.c b/hw/ide/via.c
index 4d8089d..fb3d8a0 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -166,8 +166,7 @@ static void vt82c686b_init_ports(PCIIDEState *d) {
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
         d->bmdma[i].bus = &d->bus[i];
-        qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
-                                         &d->bmdma[i].dma);
+        ide_register_restart_cb(&d->bus[i]);
     }
 }
 
-- 
2.1.0

  parent reply	other threads:[~2015-02-27 18:20 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-27 18:17 [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-02-27 18:17 ` [Qemu-devel] [PULL 01/69] coroutine: Fix use after free with qemu_coroutine_yield() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 02/69] coroutine: Clean up qemu_coroutine_enter() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 03/69] test-coroutine: Regression test for yield bug Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 04/69] vpc: Fix size in fixed image creation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 05/69] vpc: Implement bdrv_co_get_block_status() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 06/69] sheepdog: selectable object size support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 07/69] block/raw-posix: fix compilation warning on OSX Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 08/69] qcow2: Remove unused struct QCowCreateState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 09/69] virtio-blk: Check return value of blk_aio_ioctl Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 10/69] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 11/69] tests: Prepare virtio-blk-test for multi-arch implementation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 12/69] libqos: Remove PCI assumptions in constants of virtio driver Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 13/69] libqos: Add malloc generic Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 14/69] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 15/69] qcow2: Add two new fields to BDRVQcowState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 16/69] qcow2: Add refcount_bits to format-specific info Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 17/69] qcow2: Do not return new value after refcount update Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 18/69] qcow2: Only return status from qcow2_get_refcount Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 19/69] qcow2: Use unsigned addend for update_refcount() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 20/69] qcow2: Use 64 bits for refcount values Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 21/69] qcow2: Helper for refcount array reallocation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 22/69] qcow2: Helper function for refcount modification Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 23/69] qcow2: More helpers " Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 24/69] qcow2: Open images with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 25/69] qcow2: refcount_order parameter for qcow2_create2 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 26/69] qcow2: Use symbolic macros in qcow2_amend_options Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 27/69] iotests: Prepare for refcount_bits option Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 28/69] qcow2: Allow creation with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 29/69] iotests: Add test for different refcount widths Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 30/69] blkdebug: fix "once" rule Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 31/69] block: add bdrv functions for geometry and blocksize Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 32/69] raw-posix: Factor block size detection out of raw_probe_alignment() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 33/69] block: Add driver methods to probe blocksizes and geometry Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 34/69] block-backend: Add wrappers for blocksizes and geometry probing Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 35/69] BlockConf: Call backend functions to detect geometry and blocksizes Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 36/69] ide: start extracting ide_restart_dma out of bmdma_restart_dma Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 37/69] ide: prepare to move restart to common code Stefan Hajnoczi
2015-02-27 18:18 ` Stefan Hajnoczi [this message]
2015-02-27 18:18 ` [Qemu-devel] [PULL 39/69] ide: do not use BMDMA in restart callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 40/69] ide: pass IDEBus to the restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 41/69] ide: move restart callback to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 42/69] ide: remove restart_cb callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 43/69] ide: replace set_unit callback with more IDEBus state Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 44/69] ide: place initial state of the current request to IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 45/69] ide: migrate initial request state via IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 46/69] ide: commonize io_buffer_index initialization Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 47/69] ide: make more functions static Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 48/69] ide: support PIO restart for the ISA controller Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 49/69] ahci: Migrate IDEStatus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 50/69] ahci: add support for restarting non-queued commands Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 51/69] ahci: Recompute cur_cmd on migrate post load Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 52/69] qtest/ide: Test flush / retry for ISA and PCI Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 53/69] libqos/ahci: Zero-fill AHCI headers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 54/69] qtest/ahci: Add a macro bootup routine Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 55/69] libqos/ahci: add ahci command helpers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 56/69] qtest/ahci: Add DMA test variants Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 57/69] qtest/ahci: Add PIO and LBA48 tests Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 58/69] qtest/ahci: add fragmented dma test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 59/69] qtest/ahci: add qcow2 support to ahci-test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 60/69] qtest/ahci: test different disk sectors Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 61/69] qtest/ahci: Add simple flush test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 62/69] qtest/ahci: Allow override of default CLI options Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 63/69] libqtest: add qmp_eventwait Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 64/69] libqtest: add qmp_async Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 65/69] libqos: add blkdebug_prepare_script Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 66/69] qtest/ahci: add flush retry test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 67/69] sheepdog: fix confused return values Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 68/69] libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 69/69] tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test Stefan Hajnoczi
2015-02-27 18:57 ` [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-03-03 14:52   ` Peter Maydell
2015-03-03 17:29     ` Christian Borntraeger
2015-03-03 17:33       ` Max Reitz
2015-03-04  8:28         ` Christian Borntraeger
2015-03-04 12:03           ` Kevin Wolf
2015-03-04 16:32     ` Stefan Hajnoczi
2015-03-08  8:49 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425061147-1411-39-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).