From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 58/69] qtest/ahci: add fragmented dma test
Date: Fri, 27 Feb 2015 18:18:56 +0000 [thread overview]
Message-ID: <1425061147-1411-59-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1425061147-1411-1-git-send-email-stefanha@redhat.com>
From: John Snow <jsnow@redhat.com>
Test what happens when we try to use extremely short PRDTs
to accomplish a small data transfer.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
tests/ahci-test.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 21f20f7..cf0b98b 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -851,6 +851,63 @@ static void test_identify(void)
ahci_shutdown(ahci);
}
+/**
+ * Fragmented DMA test: Perform a standard 4K DMA read/write
+ * test, but make sure the physical regions are fragmented to
+ * be very small, each just 32 bytes, to see how AHCI performs
+ * with chunks defined to be much less than a sector.
+ */
+static void test_dma_fragmented(void)
+{
+ AHCIQState *ahci;
+ AHCICommand *cmd;
+ uint8_t px;
+ size_t bufsize = 4096;
+ unsigned char *tx = g_malloc(bufsize);
+ unsigned char *rx = g_malloc0(bufsize);
+ unsigned i;
+ uint64_t ptr;
+
+ ahci = ahci_boot_and_enable();
+ px = ahci_port_select(ahci);
+ ahci_port_clear(ahci, px);
+
+ /* create pattern */
+ for (i = 0; i < bufsize; i++) {
+ tx[i] = (bufsize - i);
+ }
+
+ /* Create a DMA buffer in guest memory, and write our pattern to it. */
+ ptr = guest_alloc(ahci->parent->alloc, bufsize);
+ g_assert(ptr);
+ memwrite(ptr, tx, bufsize);
+
+ cmd = ahci_command_create(CMD_WRITE_DMA);
+ ahci_command_adjust(cmd, 0, ptr, bufsize, 32);
+ ahci_command_commit(ahci, cmd, px);
+ ahci_command_issue(ahci, cmd);
+ ahci_command_verify(ahci, cmd);
+ g_free(cmd);
+
+ cmd = ahci_command_create(CMD_READ_DMA);
+ ahci_command_adjust(cmd, 0, ptr, bufsize, 32);
+ ahci_command_commit(ahci, cmd, px);
+ ahci_command_issue(ahci, cmd);
+ ahci_command_verify(ahci, cmd);
+ g_free(cmd);
+
+ /* Read back the guest's receive buffer into local memory */
+ memread(ptr, rx, bufsize);
+ guest_free(ahci->parent->alloc, ptr);
+
+ g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
+
+ ahci_shutdown(ahci);
+
+ g_free(rx);
+ g_free(tx);
+}
+
/******************************************************************************/
/* AHCI I/O Test Matrix Definitions */
@@ -1054,6 +1111,8 @@ int main(int argc, char **argv)
}
}
+ qtest_add_func("/ahci/io/dma/lba28/fragmented", test_dma_fragmented);
+
ret = g_test_run();
/* Cleanup */
--
2.1.0
next prev parent reply other threads:[~2015-02-27 18:21 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-27 18:17 [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-02-27 18:17 ` [Qemu-devel] [PULL 01/69] coroutine: Fix use after free with qemu_coroutine_yield() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 02/69] coroutine: Clean up qemu_coroutine_enter() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 03/69] test-coroutine: Regression test for yield bug Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 04/69] vpc: Fix size in fixed image creation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 05/69] vpc: Implement bdrv_co_get_block_status() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 06/69] sheepdog: selectable object size support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 07/69] block/raw-posix: fix compilation warning on OSX Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 08/69] qcow2: Remove unused struct QCowCreateState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 09/69] virtio-blk: Check return value of blk_aio_ioctl Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 10/69] libqos: Change use of pointers to uint64_t in virtio Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 11/69] tests: Prepare virtio-blk-test for multi-arch implementation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 12/69] libqos: Remove PCI assumptions in constants of virtio driver Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 13/69] libqos: Add malloc generic Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 14/69] libqos: Add virtio MMIO support Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 15/69] qcow2: Add two new fields to BDRVQcowState Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 16/69] qcow2: Add refcount_bits to format-specific info Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 17/69] qcow2: Do not return new value after refcount update Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 18/69] qcow2: Only return status from qcow2_get_refcount Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 19/69] qcow2: Use unsigned addend for update_refcount() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 20/69] qcow2: Use 64 bits for refcount values Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 21/69] qcow2: Helper for refcount array reallocation Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 22/69] qcow2: Helper function for refcount modification Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 23/69] qcow2: More helpers " Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 24/69] qcow2: Open images with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 25/69] qcow2: refcount_order parameter for qcow2_create2 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 26/69] qcow2: Use symbolic macros in qcow2_amend_options Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 27/69] iotests: Prepare for refcount_bits option Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 28/69] qcow2: Allow creation with refcount order != 4 Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 29/69] iotests: Add test for different refcount widths Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 30/69] blkdebug: fix "once" rule Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 31/69] block: add bdrv functions for geometry and blocksize Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 32/69] raw-posix: Factor block size detection out of raw_probe_alignment() Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 33/69] block: Add driver methods to probe blocksizes and geometry Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 34/69] block-backend: Add wrappers for blocksizes and geometry probing Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 35/69] BlockConf: Call backend functions to detect geometry and blocksizes Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 36/69] ide: start extracting ide_restart_dma out of bmdma_restart_dma Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 37/69] ide: prepare to move restart to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 38/69] ide: introduce ide_register_restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 39/69] ide: do not use BMDMA in restart callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 40/69] ide: pass IDEBus to the restart_cb Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 41/69] ide: move restart callback to common code Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 42/69] ide: remove restart_cb callback Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 43/69] ide: replace set_unit callback with more IDEBus state Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 44/69] ide: place initial state of the current request to IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 45/69] ide: migrate initial request state via IDEBus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 46/69] ide: commonize io_buffer_index initialization Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 47/69] ide: make more functions static Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 48/69] ide: support PIO restart for the ISA controller Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 49/69] ahci: Migrate IDEStatus Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 50/69] ahci: add support for restarting non-queued commands Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 51/69] ahci: Recompute cur_cmd on migrate post load Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 52/69] qtest/ide: Test flush / retry for ISA and PCI Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 53/69] libqos/ahci: Zero-fill AHCI headers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 54/69] qtest/ahci: Add a macro bootup routine Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 55/69] libqos/ahci: add ahci command helpers Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 56/69] qtest/ahci: Add DMA test variants Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 57/69] qtest/ahci: Add PIO and LBA48 tests Stefan Hajnoczi
2015-02-27 18:18 ` Stefan Hajnoczi [this message]
2015-02-27 18:18 ` [Qemu-devel] [PULL 59/69] qtest/ahci: add qcow2 support to ahci-test Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 60/69] qtest/ahci: test different disk sectors Stefan Hajnoczi
2015-02-27 18:18 ` [Qemu-devel] [PULL 61/69] qtest/ahci: Add simple flush test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 62/69] qtest/ahci: Allow override of default CLI options Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 63/69] libqtest: add qmp_eventwait Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 64/69] libqtest: add qmp_async Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 65/69] libqos: add blkdebug_prepare_script Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 66/69] qtest/ahci: add flush retry test Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 67/69] sheepdog: fix confused return values Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 68/69] libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c Stefan Hajnoczi
2015-02-27 18:19 ` [Qemu-devel] [PULL 69/69] tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test Stefan Hajnoczi
2015-02-27 18:57 ` [Qemu-devel] [PULL 00/69] Block patches Stefan Hajnoczi
2015-03-03 14:52 ` Peter Maydell
2015-03-03 17:29 ` Christian Borntraeger
2015-03-03 17:33 ` Max Reitz
2015-03-04 8:28 ` Christian Borntraeger
2015-03-04 12:03 ` Kevin Wolf
2015-03-04 16:32 ` Stefan Hajnoczi
2015-03-08 8:49 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425061147-1411-59-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).