From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: peter.maydell@linaro.org, qemu-devel@nongnu.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 08/38] pseries: Move sPAPR RTC code into its own file
Date: Sun, 8 Mar 2015 09:44:27 +0100 [thread overview]
Message-ID: <1425804297-53727-9-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1425804297-53727-1-git-send-email-agraf@suse.de>
From: David Gibson <david@gibson.dropbear.id.au>
At the moment the RTAS (firmware/hypervisor) time of day functions are
implemented in spapr_rtas.c along with a bunch of other things. Since
we're going to be expanding these a bit, move the RTAS RTC related code
out into new file spapr_rtc.c. Also add its own initialization function,
spapr_rtc_init() called from the main machine init routine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
hw/ppc/Makefile.objs | 2 +-
hw/ppc/spapr.c | 3 ++
hw/ppc/spapr_rtas.c | 49 -----------------------------
hw/ppc/spapr_rtc.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++
include/hw/ppc/spapr.h | 1 +
5 files changed, 88 insertions(+), 50 deletions(-)
create mode 100644 hw/ppc/spapr_rtc.c
diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index 19d9920..437955d 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -3,7 +3,7 @@ obj-y += ppc.o ppc_booke.o
# IBM pSeries (sPAPR)
obj-$(CONFIG_PSERIES) += spapr.o spapr_vio.o spapr_events.o
obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o spapr_rtas.o
-obj-$(CONFIG_PSERIES) += spapr_pci.o
+obj-$(CONFIG_PSERIES) += spapr_pci.o spapr_rtc.o
ifeq ($(CONFIG_PCI)$(CONFIG_PSERIES)$(CONFIG_LINUX), yyy)
obj-y += spapr_pci_vfio.o
endif
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 7a1b8c6..cb0e54b 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1491,6 +1491,9 @@ static void ppc_spapr_init(MachineState *machine)
/* Set up EPOW events infrastructure */
spapr_events_init(spapr);
+ /* Set up the RTC RTAS interfaces */
+ spapr_rtc_init();
+
/* Set up VIO bus */
spapr->vio_bus = spapr_vio_bus_init();
diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
index 2ec2a8e..0f1ae55 100644
--- a/hw/ppc/spapr_rtas.c
+++ b/hw/ppc/spapr_rtas.c
@@ -52,51 +52,6 @@ static void rtas_display_character(PowerPCCPU *cpu, sPAPREnvironment *spapr,
}
}
-static void rtas_get_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr,
- uint32_t token, uint32_t nargs,
- target_ulong args,
- uint32_t nret, target_ulong rets)
-{
- struct tm tm;
-
- if (nret != 8) {
- rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
- return;
- }
-
- qemu_get_timedate(&tm, spapr->rtc_offset);
-
- rtas_st(rets, 0, RTAS_OUT_SUCCESS);
- rtas_st(rets, 1, tm.tm_year + 1900);
- rtas_st(rets, 2, tm.tm_mon + 1);
- rtas_st(rets, 3, tm.tm_mday);
- rtas_st(rets, 4, tm.tm_hour);
- rtas_st(rets, 5, tm.tm_min);
- rtas_st(rets, 6, tm.tm_sec);
- rtas_st(rets, 7, 0); /* we don't do nanoseconds */
-}
-
-static void rtas_set_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr,
- uint32_t token, uint32_t nargs,
- target_ulong args,
- uint32_t nret, target_ulong rets)
-{
- struct tm tm;
-
- tm.tm_year = rtas_ld(args, 0) - 1900;
- tm.tm_mon = rtas_ld(args, 1) - 1;
- tm.tm_mday = rtas_ld(args, 2);
- tm.tm_hour = rtas_ld(args, 3);
- tm.tm_min = rtas_ld(args, 4);
- tm.tm_sec = rtas_ld(args, 5);
-
- /* Just generate a monitor event for the change */
- qapi_event_send_rtc_change(qemu_timedate_diff(&tm), &error_abort);
- spapr->rtc_offset = qemu_timedate_diff(&tm);
-
- rtas_st(rets, 0, RTAS_OUT_SUCCESS);
-}
-
static void rtas_power_off(PowerPCCPU *cpu, sPAPREnvironment *spapr,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets)
@@ -400,10 +355,6 @@ static void core_rtas_register_types(void)
{
spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character",
rtas_display_character);
- spapr_rtas_register(RTAS_GET_TIME_OF_DAY, "get-time-of-day",
- rtas_get_time_of_day);
- spapr_rtas_register(RTAS_SET_TIME_OF_DAY, "set-time-of-day",
- rtas_set_time_of_day);
spapr_rtas_register(RTAS_POWER_OFF, "power-off", rtas_power_off);
spapr_rtas_register(RTAS_SYSTEM_REBOOT, "system-reboot",
rtas_system_reboot);
diff --git a/hw/ppc/spapr_rtc.c b/hw/ppc/spapr_rtc.c
new file mode 100644
index 0000000..e290ac0
--- /dev/null
+++ b/hw/ppc/spapr_rtc.c
@@ -0,0 +1,83 @@
+/*
+ * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
+ *
+ * RTAS Real Time Clock
+ *
+ * Copyright (c) 2010-2011 David Gibson, IBM Corporation.
+ * Copyright 2014 David Gibson, Red Hat.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+#include "cpu.h"
+#include "hw/ppc/spapr.h"
+#include "qapi-event.h"
+
+static void rtas_get_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args,
+ uint32_t nret, target_ulong rets)
+{
+ struct tm tm;
+
+ if (nret != 8) {
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+ return;
+ }
+
+ qemu_get_timedate(&tm, spapr->rtc_offset);
+
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+ rtas_st(rets, 1, tm.tm_year + 1900);
+ rtas_st(rets, 2, tm.tm_mon + 1);
+ rtas_st(rets, 3, tm.tm_mday);
+ rtas_st(rets, 4, tm.tm_hour);
+ rtas_st(rets, 5, tm.tm_min);
+ rtas_st(rets, 6, tm.tm_sec);
+ rtas_st(rets, 7, 0); /* we don't do nanoseconds */
+}
+
+static void rtas_set_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args,
+ uint32_t nret, target_ulong rets)
+{
+ struct tm tm;
+
+ tm.tm_year = rtas_ld(args, 0) - 1900;
+ tm.tm_mon = rtas_ld(args, 1) - 1;
+ tm.tm_mday = rtas_ld(args, 2);
+ tm.tm_hour = rtas_ld(args, 3);
+ tm.tm_min = rtas_ld(args, 4);
+ tm.tm_sec = rtas_ld(args, 5);
+
+ /* Just generate a monitor event for the change */
+ qapi_event_send_rtc_change(qemu_timedate_diff(&tm), &error_abort);
+ spapr->rtc_offset = qemu_timedate_diff(&tm);
+
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+}
+
+void spapr_rtc_init(void)
+{
+ spapr_rtas_register(RTAS_GET_TIME_OF_DAY, "get-time-of-day",
+ rtas_get_time_of_day);
+ spapr_rtas_register(RTAS_SET_TIME_OF_DAY, "set-time-of-day",
+ rtas_set_time_of_day);
+}
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index 642cdc3..e43339d 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -480,5 +480,6 @@ int spapr_dma_dt(void *fdt, int node_off, const char *propname,
uint32_t liobn, uint64_t window, uint32_t size);
int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
sPAPRTCETable *tcet);
+void spapr_rtc_init(void);
#endif /* !defined (__HW_SPAPR_H__) */
--
1.8.1.4
next prev parent reply other threads:[~2015-03-08 8:45 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-08 8:44 [Qemu-devel] [PULL 2.3 00/38] ppc patch queue 2015-03-08 Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 01/38] spapr_vio/spapr_iommu: Move VIO bypass where it belongs Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 02/38] target-ppc: Use right page size with hash table lookup Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 03/38] pseries: Limit PCI host bridge "index" value Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 04/38] spapr: Add pseries-2.3 machine Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 05/38] spapr-pci: Enable huge BARs Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 06/38] Generalize QOM publishing of date and time from mc146818rtc.c Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 07/38] Add more VMSTATE_*_TEST variants for integers Alexander Graf
2015-03-08 8:44 ` Alexander Graf [this message]
2015-03-08 8:44 ` [Qemu-devel] [PULL 09/38] pseries: Add more parameter validation in RTAS time of day functions Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 10/38] pseries: Add spapr_rtc_read() helper function Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 11/38] pseries: Make RTAS time of day functions respect -rtc options Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 12/38] pseries: Make the PAPR RTC a qdev device Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 13/38] pseries: Move rtc_offset into RTC device's state structure Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 14/38] pseries: Export RTC time via QOM Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 15/38] PPC: Clean up misuse of qdev_init() in kvm-openpic creation Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 16/38] spapr: Clean up misuse of qdev_init() in xics-kvm creation Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 17/38] vga: Expose framebuffer byteorder as a QOM property Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 18/38] pseries: Switch VGA endian on H_SET_MODE Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 19/38] Openpic: check that cpu id is within the number of cpus Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 20/38] display cpu id dump state Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 21/38] macio.c: include parent PCIDevice state in VMStateDescription Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 22/38] adb.c: include ADBDevice parent state in KBDState and MouseState Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 23/38] cuda.c: include adb_poll_timer in VMStateDescription Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 24/38] target-ppc: move sdr1 value change detection logic to helper_store_sdr1() Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 25/38] target-ppc: force update of msr bits in cpu_post_load Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 26/38] openpic: fix segfault on -M mac99 savevm Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 27/38] openpic: fix up loadvm under -M mac99 Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 28/38] openpic: switch IRQQueue queue from inline to bitmap Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 29/38] openpic: convert to vmstate Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 30/38] spapr_vio: Convert to realize() Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 31/38] Revert "default-configs/ppc64: add all components of i82378 SuperIO chip used by prep" Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 32/38] ppc64-softmmu: Remove unsupported FDC from config Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 33/38] ppc64-softmmu: Remove duplicated OPENPIC " Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 34/38] PPC: Remove duplicate OPENPIC defines in default-configs Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 35/38] PPC: Introduce the Virtual Time Base (VTB) SPR register Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 36/38] target-ppc: Add versions to server CPU descriptions Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 37/38] sPAPR: Implement EEH RTAS calls Alexander Graf
2015-03-08 8:44 ` [Qemu-devel] [PULL 38/38] sPAPR: Implement sPAPRPHBClass EEH callbacks Alexander Graf
2015-03-09 9:13 ` [Qemu-devel] [PULL 2.3 00/38] ppc patch queue 2015-03-08 Peter Maydell
2015-03-09 12:30 ` Alexander Graf
2015-03-09 13:16 ` Peter Maydell
2015-03-09 14:02 ` Alexander Graf
2015-03-09 15:14 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425804297-53727-9-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=david@gibson.dropbear.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).