From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Jeremy White <jwhite@codeweavers.com>, Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PULL v2 4/5] Allow the use of X11 from a non standard location.
Date: Thu, 12 Mar 2015 09:38:15 +0100 [thread overview]
Message-ID: <1426149496-6043-5-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1426149496-6043-1-git-send-email-kraxel@redhat.com>
From: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
[ kraxel: solve opengl patch conflicts ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
configure | 24 +++++++++++++++++++-----
hw/display/Makefile.objs | 1 +
2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/configure b/configure
index ecd7893..fef9c95 100755
--- a/configure
+++ b/configure
@@ -2085,6 +2085,15 @@ if test "$sparse" != "no" ; then
fi
##########################################
+# X11 probe
+x11_cflags=
+x11_libs=-lX11
+if $pkg_config --exists "x11"; then
+ x11_cflags=`$pkg_config --cflags x11`
+ x11_libs=`$pkg_config --libs x11`
+fi
+
+##########################################
# GTK probe
if test "$gtkabi" = ""; then
@@ -2111,7 +2120,8 @@ if test "$gtk" != "no"; then
gtk_cflags=`$pkg_config --cflags $gtkpackage`
gtk_libs=`$pkg_config --libs $gtkpackage`
if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
- gtk_libs="$gtk_libs -lX11"
+ gtk_cflags="$gtk_cflags $x11_cflags"
+ gtk_libs="$gtk_libs $x11_libs"
fi
libs_softmmu="$gtk_libs $libs_softmmu"
gtk="yes"
@@ -2236,8 +2246,9 @@ if test "$sdl" = "yes" ; then
#endif
int main(void) { return 0; }
EOF
- if compile_prog "$sdl_cflags" "$sdl_libs" ; then
- sdl_libs="$sdl_libs -lX11"
+ if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
+ sdl_cflags="$sdl_cflags $x11_cflags"
+ sdl_libs="$sdl_libs $x11_libs"
fi
libs_softmmu="$sdl_libs $libs_softmmu"
fi
@@ -3110,13 +3121,15 @@ libs_softmmu="$libs_softmmu $fdt_libs"
# opengl probe (for sdl2, milkymist-tmu2)
if test "$opengl" != "no" ; then
opengl_pkgs="gl"
- if $pkg_config $opengl_pkgs; then
- opengl_libs="$($pkg_config --libs $opengl_pkgs) -lX11"
+ if $pkg_config $opengl_pkgs x11; then
+ opengl_cflags="$($pkg_config --cflags $opengl_pkgs) $x11_cflags"
+ opengl_libs="$($pkg_config --libs $opengl_pkgs) $x11_libs"
opengl=yes
else
if test "$opengl" = "yes" ; then
feature_not_found "opengl" "Install GL devel (e.g. MESA)"
fi
+ opengl_cflags=""
opengl_libs=""
opengl=no
fi
@@ -4753,6 +4766,7 @@ fi
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
+ echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
fi
diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
index e18ea57..e73cb7d 100644
--- a/hw/display/Makefile.objs
+++ b/hw/display/Makefile.objs
@@ -20,6 +20,7 @@ common-obj-$(CONFIG_ZAURUS) += tc6393xb.o
ifeq ($(CONFIG_MILKYMIST_TMU2),y)
common-obj-y += milkymist-tmu2.o
+milkymist-tmu2.o-cflags := $(OPENGL_CFLAGS)
libs_softmmu += $(OPENGL_LIBS)
endif
--
1.8.3.1
next prev parent reply other threads:[~2015-03-12 8:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-12 8:38 [Qemu-devel] [PULL v2 0/5] sdl patch queue Gerd Hoffmann
2015-03-12 8:38 ` [Qemu-devel] [PULL v2 1/5] sdl: Refresh debug statements Gerd Hoffmann
2015-03-12 8:38 ` [Qemu-devel] [PULL v2 2/5] sdl: Fix crash when calling sdl_switch() with NULL surface Gerd Hoffmann
2015-03-12 8:38 ` [Qemu-devel] [PULL v2 3/5] configure: opengl overhaul Gerd Hoffmann
2015-03-12 8:38 ` Gerd Hoffmann [this message]
2015-03-12 8:38 ` [Qemu-devel] [PULL v2 5/5] pixman: add a bunch of PIXMAN_BE_* defines for 32bpp Gerd Hoffmann
2015-03-12 10:35 ` [Qemu-devel] [PULL v2 0/5] sdl patch queue Peter Maydell
2015-03-12 10:48 ` Gerd Hoffmann
2015-03-12 11:16 ` Peter Maydell
2015-03-12 14:54 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426149496-6043-5-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=jwhite@codeweavers.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).