qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 08/11] rename save_block_hdr to save_page_header
Date: Mon, 16 Mar 2015 14:41:09 +0100	[thread overview]
Message-ID: <1426513272-20070-9-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1426513272-20070-1-git-send-email-quintela@redhat.com>

It has always been a page header, not a block header.  Once there, the
flag argument was only passed to make a bit or with it, just do the or
on the caller.

Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 arch_init.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/arch_init.c b/arch_init.c
index 7377a07..c3f7d3f 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -316,8 +316,19 @@ static uint64_t migration_dirty_pages;
 static uint32_t last_version;
 static bool ram_bulk_stage;

-static size_t save_block_hdr(QEMUFile *f, RAMBlock *block, ram_addr_t offset,
-                             int flag)
+/**
+ * save_page_header: Write page header to wire
+ *
+ * If this is the 1st block, it also writes the block identification
+ *
+ * Returns: Number of bytes written
+ *
+ * @f: QEMUFile where to send the data
+ * @block: block that contains the page we want to send
+ * @offset: offset inside the block for the page
+ *          in the lower bits, it contains flags
+ */
+static size_t save_page_header(QEMUFile *f, RAMBlock *block, ram_addr_t offset)
 {
     size_t size;

@@ -325,7 +336,7 @@ static size_t save_block_hdr(QEMUFile *f, RAMBlock *block, ram_addr_t offset,
         offset |= RAM_SAVE_FLAG_CONTINUE;
     }

-    qemu_put_be64(f, offset | flag);
+    qemu_put_be64(f, offset);
     size = 8;

     if (block != last_sent_block) {
@@ -425,7 +436,7 @@ static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
     }

     /* Send XBZRLE based compressed page */
-    bytes_xbzrle = save_block_hdr(f, block, offset, RAM_SAVE_FLAG_XBZRLE);
+    bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
     qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
     qemu_put_be16(f, encoded_len);
     qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
@@ -643,8 +654,8 @@ static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,
         }
     } else if (is_zero_range(p, TARGET_PAGE_SIZE)) {
         acct_info.dup_pages++;
-        *bytes_transferred += save_block_hdr(f, block, offset,
-                                             RAM_SAVE_FLAG_COMPRESS);
+        *bytes_transferred += save_page_header(f, block,
+                                               offset | RAM_SAVE_FLAG_COMPRESS);
         qemu_put_byte(f, 0);
         *bytes_transferred += 1;
         pages = 1;
@@ -665,8 +676,8 @@ static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,

     /* XBZRLE overflow or normal page */
     if (pages == -1) {
-        *bytes_transferred += save_block_hdr(f, block, offset,
-                                             RAM_SAVE_FLAG_PAGE);
+        *bytes_transferred += save_page_header(f, block,
+                                               offset | RAM_SAVE_FLAG_PAGE);
         if (send_async) {
             qemu_put_buffer_async(f, p, TARGET_PAGE_SIZE);
         } else {
-- 
2.1.0

  parent reply	other threads:[~2015-03-16 13:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-16 13:41 [Qemu-devel] [PULL 00/11] Migration pull request Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 01/11] Add -incoming defer Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 02/11] Add migrate_incoming Juan Quintela
2015-03-16 14:35   ` Eric Blake
2015-03-16 13:41 ` [Qemu-devel] [PULL 03/11] ram: make all save_page functions take a uint64_t parameter Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 04/11] ram_find_and_save_block: change calling convention Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 05/11] ram_save_page: change calling covention Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 06/11] save_xbzrle_page: change calling convention Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 07/11] save_block_hdr: we can recalculate the cont parameter here Juan Quintela
2015-03-17  3:13   ` Li, Liang Z
2015-03-17 12:00     ` Juan Quintela
2015-03-16 13:41 ` Juan Quintela [this message]
2015-03-16 13:41 ` [Qemu-devel] [PULL 09/11] migration: Read JSON VM description on incoming migration Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 10/11] migration: Allow to suppress vmdesc submission Juan Quintela
2015-03-16 13:41 ` [Qemu-devel] [PULL 11/11] pc: Disable vmdesc submission for old machines Juan Quintela
2015-03-16 15:55 ` [Qemu-devel] [PULL 00/11] Migration pull request Markus Armbruster
2015-03-16 16:20   ` Juan Quintela
2015-03-16 17:22 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426513272-20070-9-git-send-email-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).