qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: zhanghailiang <zhang.zhanghailiang@huawei.com>
To: qemu-devel@nongnu.org
Cc: lizhijian@cn.fujitsu.com, quintela@redhat.com,
	yunhong.jiang@intel.com, eddie.dong@intel.com,
	peter.huangpeng@huawei.com, dgilbert@redhat.com,
	zhanghailiang <zhang.zhanghailiang@huawei.com>,
	arei.gonglei@huawei.com, amit.shah@redhat.com,
	Yang Hongyang <yanghy@cn.fujitsu.com>,
	david@gibson.dropbear.id.au
Subject: [Qemu-devel] [RFC PATCH v4 28/28] COLO: Add block replication into colo process
Date: Thu, 26 Mar 2015 13:29:34 +0800	[thread overview]
Message-ID: <1427347774-8960-29-git-send-email-zhang.zhanghailiang@huawei.com> (raw)
In-Reply-To: <1427347774-8960-1-git-send-email-zhang.zhanghailiang@huawei.com>

From: Wen Congyang <wency@cn.fujitsu.com>

Make sure master start block replication after slave's block replication started

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
 migration/colo.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 118 insertions(+), 2 deletions(-)

diff --git a/migration/colo.c b/migration/colo.c
index 894bf5f..d70f80b 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -18,6 +18,8 @@
 #include "migration/migration-failover.h"
 #include "net/colo-nic.h"
 #include "qmp-commands.h"
+#include "block/block.h"
+#include "sysemu/block-backend.h"
 
 #define DEBUG_COLO 0
 
@@ -110,6 +112,68 @@ static bool colo_runstate_is_stopped(void)
     return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
 }
 
+static void blk_start_replication(bool primary, Error **errp)
+{
+    int mode = primary ? COLO_MODE_PRIMARY : COLO_MODE_SECONDARY;
+    BlockBackend *blk, *temp;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_start_replication(blk_bs(blk), mode, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            goto fail;
+        }
+    }
+
+    return;
+
+fail:
+    for (temp = blk_next(NULL); temp != blk; temp = blk_next(temp)) {
+        bdrv_stop_replication(blk_bs(temp), NULL);
+    }
+}
+
+static void blk_do_checkpoint(Error **errp)
+{
+    BlockBackend *blk;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_do_checkpoint(blk_bs(blk), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+}
+
+static void blk_stop_replication(Error **errp)
+{
+    BlockBackend *blk;
+    Error *local_err = NULL;
+
+    for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
+        if (blk_is_read_only(blk) || !blk_is_inserted(blk)) {
+            continue;
+        }
+
+        bdrv_stop_replication(blk_bs(blk), &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+    }
+}
+
 /*
  * there are two way to entry this function
  * 1. From colo checkpoint incoming thread, in this case
@@ -120,6 +184,8 @@ static bool colo_runstate_is_stopped(void)
  */
 static void slave_do_failover(void)
 {
+    Error *local_err = NULL;
+
     /* Wait for incoming thread loading vmstate */
     while (vmstate_loading) {
         ;
@@ -129,6 +195,10 @@ static void slave_do_failover(void)
         error_report("colo proxy failed to do failover");
     }
     colo_proxy_destroy(COLO_SECONDARY_MODE);
+    blk_stop_replication(&local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
 
     colo = NULL;
 
@@ -147,6 +217,7 @@ static void slave_do_failover(void)
 static void master_do_failover(void)
 {
     MigrationState *s = migrate_get_current();
+    Error *local_err = NULL;
 
     if (!colo_runstate_is_stopped()) {
         vm_stop_force_state(RUN_STATE_COLO);
@@ -158,6 +229,11 @@ static void master_do_failover(void)
         migrate_set_state(s, MIGRATION_STATUS_COLO, MIGRATION_STATUS_COMPLETED);
     }
 
+    blk_stop_replication(&local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+
     vm_start();
 }
 
@@ -231,6 +307,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
     int ret;
     size_t size;
     QEMUFile *trans = NULL;
+    Error *local_err = NULL;
 
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_NEW);
     if (ret < 0) {
@@ -282,6 +359,16 @@ static int colo_do_checkpoint_transaction(MigrationState *s, QEMUFile *control)
         goto out;
     }
 
+    /* we call this api although this may do nothing on primary side */
+    qemu_mutex_lock_iothread();
+    blk_do_checkpoint(&local_err);
+    qemu_mutex_unlock_iothread();
+    if (local_err) {
+        error_report_err(local_err);
+        ret = -1;
+        goto out;
+    }
+
     ret = colo_ctl_put(s->file, COLO_CHECKPOINT_SEND);
     if (ret < 0) {
         goto out;
@@ -339,6 +426,7 @@ static void *colo_thread(void *opaque)
     QEMUFile *colo_control = NULL;
     int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
     int ret;
+    Error *local_err = NULL;
 
     if (colo_proxy_init(COLO_PRIMARY_MODE) != 0) {
         error_report("Init colo proxy error");
@@ -370,6 +458,12 @@ static void *colo_thread(void *opaque)
         goto out;
     }
 
+    /* start block replication */
+    blk_start_replication(true, &local_err);
+    if (local_err) {
+        goto out;
+    }
+
     qemu_mutex_lock_iothread();
     vm_start();
     qemu_mutex_unlock_iothread();
@@ -414,7 +508,11 @@ do_checkpoint:
     }
 
 out:
-    error_report("colo: some error happens in colo_thread");
+    if (local_err) {
+        error_report_err(local_err);
+    } else {
+        error_report("colo: some error happens in colo_thread");
+    }
     qemu_mutex_lock_iothread();
     if (!failover_request_is_set()) {
         error_report("master takeover from checkpoint channel");
@@ -516,6 +614,7 @@ void *colo_process_incoming_checkpoints(void *opaque)
     QEMUFile *ctl = NULL, *fb = NULL;
     int ret;
     uint64_t total_size;
+    Error *local_err = NULL;
 
     qdev_hotplug = 0;
 
@@ -543,6 +642,13 @@ void *colo_process_incoming_checkpoints(void *opaque)
         goto out;
     }
 
+    /* start block replication */
+    blk_start_replication(false, &local_err);
+    if (local_err) {
+        goto out;
+    }
+    DPRINTF("finish block replication\n");
+
     ret = colo_ctl_put(ctl, COLO_READY);
     if (ret < 0) {
         goto out;
@@ -627,7 +733,13 @@ void *colo_process_incoming_checkpoints(void *opaque)
         }
         DPRINTF("Finish load all vm state to cache\n");
         vmstate_loading = false;
+
+        /* discard colo disk buffer */
+        blk_do_checkpoint(&local_err);
         qemu_mutex_unlock_iothread();
+        if (local_err) {
+            goto out;
+        }
 
         ret = colo_ctl_put(ctl, COLO_CHECKPOINT_LOADED);
         if (ret < 0) {
@@ -645,7 +757,11 @@ void *colo_process_incoming_checkpoints(void *opaque)
     }
 
 out:
-    error_report("Detect some error or get a failover request");
+    if (local_err) {
+        error_report_err(local_err);
+    } else {
+        error_report("Detect some error or get a failover request");
+    }
     /* determine whether we need to failover */
     if (!failover_request_is_set()) {
         /*
-- 
1.7.12.4

  parent reply	other threads:[~2015-03-26  5:32 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-26  5:29 [Qemu-devel] [RFC PATCH v4 00/28] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 01/28] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 02/28] migration: Introduce capability 'colo' to migration zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 03/28] COLO: migrate colo related info to slave zhanghailiang
2015-05-15 11:38   ` Dr. David Alan Gilbert
2015-05-18  5:04     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 04/28] migration: Integrate COLO checkpoint process into migration zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 05/28] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 06/28] COLO: Implement colo checkpoint protocol zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 07/28] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
2015-05-15 11:28   ` Dr. David Alan Gilbert
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 08/28] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
2015-05-15 11:56   ` Dr. David Alan Gilbert
2015-05-18  5:10     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 09/28] COLO: Save VM state to slave when do checkpoint zhanghailiang
2015-05-15 12:09   ` Dr. David Alan Gilbert
2015-05-18  9:11     ` zhanghailiang
2015-05-18 12:10       ` Dr. David Alan Gilbert
2015-05-18 12:22         ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 10/28] COLO RAM: Load PVM's dirty page into SVM's RAM cache temporarily zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 11/28] COLO VMstate: Load VM state into qsb before restore it zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 12/28] arch_init: Start to trace dirty pages of SVM zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 13/28] COLO RAM: Flush cached RAM into SVM's memory zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 14/28] COLO failover: Introduce a new command to trigger a failover zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 15/28] COLO failover: Implement COLO master/slave failover work zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 16/28] COLO failover: Don't do failover during loading VM's state zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 17/28] COLO: Add new command parameter 'colo_nicname' 'colo_script' for net zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 18/28] COLO NIC: Init/remove colo nic devices when add/cleanup tap devices zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 19/28] COLO NIC: Implement colo nic device interface configure() zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 20/28] COLO NIC : Implement colo nic init/destroy function zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 21/28] COLO NIC: Some init work related with proxy module zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 22/28] COLO: Do checkpoint according to the result of net packets comparing zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 23/28] COLO: Improve checkpoint efficiency by do additional periodic checkpoint zhanghailiang
2015-05-18 16:48   ` Dr. David Alan Gilbert
2015-05-19  6:08     ` zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 24/28] COLO: Add colo-set-checkpoint-period command zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 25/28] COLO NIC: Implement NIC checkpoint and failover zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 26/28] COLO: Disable qdev hotplug when VM is in COLO mode zhanghailiang
2015-03-26  5:29 ` [Qemu-devel] [RFC PATCH v4 27/28] COLO: Implement shutdown checkpoint zhanghailiang
2015-03-26  5:29 ` zhanghailiang [this message]
2015-04-08  8:16 ` [Qemu-devel] [RFC PATCH v4 00/28] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service zhanghailiang
2015-04-22 11:18   ` Dr. David Alan Gilbert
2015-04-24  7:25     ` Wen Congyang
2015-04-24  8:35       ` Dr. David Alan Gilbert
2015-04-28 10:51         ` zhanghailiang
2015-05-06 17:11           ` Dr. David Alan Gilbert
2015-04-24  8:52     ` zhanghailiang
2015-04-24  8:56       ` Dr. David Alan Gilbert
2015-05-14 12:14 ` Dr. David Alan Gilbert
2015-05-14 12:58   ` zhanghailiang
2015-05-14 16:09     ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1427347774-8960-29-git-send-email-zhang.zhanghailiang@huawei.com \
    --to=zhang.zhanghailiang@huawei.com \
    --cc=amit.shah@redhat.com \
    --cc=arei.gonglei@huawei.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=dgilbert@redhat.com \
    --cc=eddie.dong@intel.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=peter.huangpeng@huawei.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=yanghy@cn.fujitsu.com \
    --cc=yunhong.jiang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).