qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fam Zheng <famz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	berto@igalia.com, qemu-block@nongnu.org,
	Jeff Cody <jcody@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	pbonzini@redhat.com
Subject: [Qemu-devel] [PATCH v2 1/4] blockjob: Allow nested pause
Date: Fri,  3 Apr 2015 22:05:18 +0800	[thread overview]
Message-ID: <1428069921-2957-2-git-send-email-famz@redhat.com> (raw)
In-Reply-To: <1428069921-2957-1-git-send-email-famz@redhat.com>

This patch changes block_job_pause to increase the pause counter and
block_job_resume to decrease it.

The counter will allow calling block_job_pause/block_job_resume
unconditionally on a job when we need to suspend the IO temporarily.

>From now on, each block_job_resume must be paired with a block_job_pause
to keep the counter balanced.

The user pause from QMP or HMP will only trigger block_job_pause once
until it's resumed, this is achieved by adding a user_paused flag in
BlockJob.

One occurrence of block_job_resume in mirror_complete is replaced with
block_job_enter which does what is necessary.

In block_job_cancel, the cancel flag is good enough to instruct
coroutines to quit loop, so use block_job_enter to replace the unpaired
block_job_resume.

Upon block job IO error, user is notified about the entering to the
pause state, so this pause belongs to user pause, set the flag
accordingly and expect a matching QMP resume.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 block/mirror.c           |  2 +-
 blockdev.c               |  8 +++++---
 blockjob.c               | 23 +++++++++++++++++------
 include/block/blockjob.h | 20 ++++++++++++++++----
 4 files changed, 39 insertions(+), 14 deletions(-)

diff --git a/block/mirror.c b/block/mirror.c
index 4056164..65b1718 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -634,7 +634,7 @@ static void mirror_complete(BlockJob *job, Error **errp)
     }
 
     s->should_complete = true;
-    block_job_resume(job);
+    block_job_enter(&s->common);
 }
 
 static const BlockJobDriver mirror_job_driver = {
diff --git a/blockdev.c b/blockdev.c
index fbb3a79..9132d69 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2699,7 +2699,7 @@ void qmp_block_job_cancel(const char *device,
         force = false;
     }
 
-    if (job->paused && !force) {
+    if (job->user_paused && !force) {
         error_setg(errp, "The block job for device '%s' is currently paused",
                    device);
         goto out;
@@ -2716,10 +2716,11 @@ void qmp_block_job_pause(const char *device, Error **errp)
     AioContext *aio_context;
     BlockJob *job = find_block_job(device, &aio_context, errp);
 
-    if (!job) {
+    if (!job || job->user_paused) {
         return;
     }
 
+    job->user_paused = true;
     trace_qmp_block_job_pause(job);
     block_job_pause(job);
     aio_context_release(aio_context);
@@ -2730,10 +2731,11 @@ void qmp_block_job_resume(const char *device, Error **errp)
     AioContext *aio_context;
     BlockJob *job = find_block_job(device, &aio_context, errp);
 
-    if (!job) {
+    if (!job || !job->user_paused) {
         return;
     }
 
+    job->user_paused = false;
     trace_qmp_block_job_resume(job);
     block_job_resume(job);
     aio_context_release(aio_context);
diff --git a/blockjob.c b/blockjob.c
index ba2255d..2755465 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -107,7 +107,7 @@ void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
 
 void block_job_complete(BlockJob *job, Error **errp)
 {
-    if (job->paused || job->cancelled || !job->driver->complete) {
+    if (job->pause_count || job->cancelled || !job->driver->complete) {
         error_set(errp, QERR_BLOCK_JOB_NOT_READY,
                   bdrv_get_device_name(job->bs));
         return;
@@ -118,17 +118,26 @@ void block_job_complete(BlockJob *job, Error **errp)
 
 void block_job_pause(BlockJob *job)
 {
-    job->paused = true;
+    job->pause_count++;
 }
 
 bool block_job_is_paused(BlockJob *job)
 {
-    return job->paused;
+    return job->pause_count > 0;
 }
 
 void block_job_resume(BlockJob *job)
 {
-    job->paused = false;
+    assert(job->pause_count > 0);
+    job->pause_count--;
+    if (job->pause_count) {
+        return;
+    }
+    block_job_enter(job);
+}
+
+void block_job_enter(BlockJob *job)
+{
     block_job_iostatus_reset(job);
     if (job->co && !job->busy) {
         qemu_coroutine_enter(job->co, NULL);
@@ -138,7 +147,7 @@ void block_job_resume(BlockJob *job)
 void block_job_cancel(BlockJob *job)
 {
     job->cancelled = true;
-    block_job_resume(job);
+    block_job_enter(job);
 }
 
 bool block_job_is_cancelled(BlockJob *job)
@@ -258,7 +267,7 @@ BlockJobInfo *block_job_query(BlockJob *job)
     info->device    = g_strdup(bdrv_get_device_name(job->bs));
     info->len       = job->len;
     info->busy      = job->busy;
-    info->paused    = job->paused;
+    info->paused    = job->pause_count > 0;
     info->offset    = job->offset;
     info->speed     = job->speed;
     info->io_status = job->iostatus;
@@ -335,6 +344,8 @@ BlockErrorAction block_job_error_action(BlockJob *job, BlockDriverState *bs,
                                     IO_OPERATION_TYPE_WRITE,
                                     action, &error_abort);
     if (action == BLOCK_ERROR_ACTION_STOP) {
+        /* make the pause user visible, which will be resumed from QMP. */
+        job->user_paused = true;
         block_job_pause(job);
         block_job_iostatus_set_err(job, error);
         if (bs != job->bs) {
diff --git a/include/block/blockjob.h b/include/block/blockjob.h
index b6d4ebb..9f4b20d 100644
--- a/include/block/blockjob.h
+++ b/include/block/blockjob.h
@@ -79,10 +79,14 @@ struct BlockJob {
     bool cancelled;
 
     /**
-     * Set to true if the job is either paused, or will pause itself
-     * as soon as possible (if busy == true).
+     * Counter for pause request. If non-zero, the block job will pause.
      */
-    bool paused;
+    int pause_count;
+
+    /**
+     * Set to true if the job is paused by user.
+     */
+    bool user_paused;
 
     /**
      * Set to false by the job while it is in a quiescent state, where
@@ -225,11 +229,19 @@ void block_job_pause(BlockJob *job);
  * block_job_resume:
  * @job: The job to be resumed.
  *
- * Resume the specified job.
+ * Resume the specified job.  Must be paired with a preceding block_job_pause.
  */
 void block_job_resume(BlockJob *job);
 
 /**
+ * block_job_enter:
+ * @job: The job to enter.
+ *
+ * Continue the specified job by entering the coroutine.
+ */
+void block_job_enter(BlockJob *job);
+
+/**
  * block_job_event_cancelled:
  * @job: The job whose information is requested.
  *
-- 
2.1.0

  reply	other threads:[~2015-04-03 14:06 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-03 14:05 [Qemu-devel] [PATCH v2 0/4] Fix "stop" draining block jobs Fam Zheng
2015-04-03 14:05 ` Fam Zheng [this message]
2015-04-03 14:13   ` [Qemu-devel] [PATCH v2 1/4] blockjob: Allow nested pause Paolo Bonzini
2015-04-20 17:11     ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-08  7:25   ` [Qemu-devel] " Alberto Garcia
2015-04-08 10:31   ` Stefan Hajnoczi
2015-04-03 14:05 ` [Qemu-devel] [PATCH v2 2/4] block: Pause block jobs in bdrv_drain_all Fam Zheng
2015-04-07 13:59   ` Alberto Garcia
2015-04-08 10:37   ` Stefan Hajnoczi
2015-04-08 14:56     ` Alberto Garcia
2015-04-09 10:34       ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-03 14:05 ` [Qemu-devel] [PATCH v2 3/4] qemu-iotests: Test that "stop" doesn't drain block jobs Fam Zheng
2015-04-07 14:46   ` Alberto Garcia
2015-04-08 10:39   ` Stefan Hajnoczi
2015-04-24 15:43   ` [Qemu-devel] [Qemu-block] " Max Reitz
2015-04-27  5:14     ` Fam Zheng
2015-04-27 11:08       ` Max Reitz
2015-04-03 14:05 ` [Qemu-devel] [PATCH v2 4/4] blockjob: Update function name in comments Fam Zheng
2015-04-07 14:46   ` Alberto Garcia
2015-04-08 10:40 ` [Qemu-devel] [PATCH v2 0/4] Fix "stop" draining block jobs Stefan Hajnoczi
2015-04-20 15:38 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428069921-2957-2-git-send-email-famz@redhat.com \
    --to=famz@redhat.com \
    --cc=berto@igalia.com \
    --cc=jcody@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).